<div dir="ltr"><div><div>Dear all</div><div> </div><div>I'm simulating an autonomous photovoltaic system and I have doubts about some parameters of elements</div><div> </div><div> - Type94</div><div> </div><div>Input 3: Load voltaje. I'm working with 24V (voltage of the designed system), but I do not know what value is right, or I have to use 0 (default), or 45V (datasheet of panel: Current-Voltage & Power-Voltage Curve).</div>
<div><br></div><div><br></div><div>-Type48d</div><div> </div><div>Input 4: Battery voltage (BV). I put 24V which is the system voltage. But at the same time I have connected it to the total current of battery type 47b. Can I leave this setting?, Or should I put INPUT4 in 0 (default) and connected to the battery?, Or as I connect?</div>
</div><div><br></div><div><div>Input 5: Max battery input. I connected it to max. power of charge of battery. But the input 5 I put a value of 0. I must leave the 0? Or change to battery power?.</div></div><br clear="all">
<div>Input 6: Min. battery output. I plugged of max. power of discharge of battery. But I put the input 6 with value 0. I must leave the 0? Or change to battery power?.<br></div><div><br></div><div><div>Input 7: lower limit on battery voltaje. I plugged of discharge cutoff voltaje (DCV), but I'm not sure if this is the proper connection.<br>
</div></div><div><br></div><div><div>Input 8: Power corresponding to BV. I do not know what  is the “Power corresponding to lower limit on battery voltage during discharge”, I connected of power corresponding to DCV of the battery, this is correct?.</div>
<div> </div></div><div>Input 9: High limit on BV. I do not know what  is the “Higher limit on battery voltage during charge”, I plugged of carge cut off voltaje to CCV of battery, but I'm not sure.<br></div><div><br></div>
<div>Thanyou in advance<br></div><div><br></div>-- <br><em>Ing. Andrea Catalina Alvarado</em>
</div>