Hello,<br><br>I am trying the example "SDHW" and I do not understand how the divertor (type 11) works.<br><br>I
 would expect that when the "set point temperature" is set at 45°C, then
 the "outlet temperature" from the "tee piece" should be max. 45°C. But 
it is not so ... the temperature reaches to the 80 °C.<br><br>Can you help me, please? How can I set max. temperature on the outlet from the "tank" ("temperature to load").<br><br>Thank you very much.<br>
<br>Best regards<br>Pavel Adam<br>Brno University of Technology<br>