<div>Dear David and all,</div><div> </div><div>I use TESS Type534, vertically cylindrical storage tank with immersed HX, and face to a small problem with "gas flue losses". From what I understand, the gas flue losses is for the modelling of heat loss through an immersed gas pipes for boiler or some kind of heater.</div>
<div>In parameters, there are some "Flue loss coefficient for node" and their unit are [W/m2K] or such order. If so, the area of the gas flue pipes also need to be set, with unit [m2], but there isn't such a parameter. </div>
<div>I wonder if this is just a little mistake and the "Flue loss coefficient for node" has the unit [W/K] correctly. This is more reasonable, because it is explainded as "for node".</div><div> </div><div>
Thanks in advance.</div><div> </div><div>Mika</div><div> </div><div>======================</div><div>Mika Yoshinaga</div><div>Assoc. Prof., Meijo University <br>Dr. of Environmental Studies</div><div>Email  <a href="mailto:yoshi@meijo-u.ac.jp">yoshi@meijo-u.ac.jp</a></div>
<div><div>======================</div></div><div> </div><div><br> </div>