<html>
<head>
<meta content="text/html; charset=ISO-8859-1"
http-equiv="Content-Type">
</head>
<body text="#000000" bgcolor="#FFFFFF">
Martin,<br>
Carefully check the "angle of incidence," "beam'" and "total"
radiation connections between your weather component (probably
Type15) and the building (Type56). I would imagine that one of them
is incorrect. Make sure that the surfaces that you have defined in
the weather processor correspond correctly to the orientations that
you have defined for your building in TRNBuild. Warnings are there
to help you correct problems in your input file. While it is
possible to increase the number of them that are allowed before the
simulation terminates in error, every effort should be made to
understand and correct the warnings first.<br>
Best,<br>
David<br>
<br>
<br>
<div class="moz-cite-prefix">On 12/31/2012 04:47, Martin Ssembatya
wrote:<br>
</div>
<blockquote
cite="mid:CAOVnU7uy+8EZgj=QdMJi4PvjgTsXLD89JMmA=CBGVCUgGE7Q7A@mail.gmail.com"
type="cite">
<div dir="ltr">Hello there,<br>
<br>
I am using using type 56 to model the cooling loads that are to
be served by a solar cooling system. However, i am getting a
number of warnings for some periods of the year related to the
beam radiation incident to one of the orientations. The warnings
read, "<i>Beam radiation greater than 0 occurred for an incident
angle of 90.00 greater than 90 degrees for orientation 1. Beam
radiation has been set to 0</i>!. These warnings keep re -
occurring for very many simulation time steps and eventually, it
becomes a fatal error after the maximum number of warnings per
simulation is exceeded. How can i increase the maximum number of
warnings per simulation in order to dodge this problem, because
i cant see any way else i can solve this warnings problem? I
have tried to increase the "Before 'WARNING' value in the studio
cards, but nothing works out. Or is there someone who has ever
gotten a similar problem to kindly help me with some suggestions
of how i can go about this problem?? <br>
<br>
Kind regards and happy 2013<br>
Martin <br>
</div>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
<pre wrap="">_______________________________________________
TRNSYS-users mailing list
<a class="moz-txt-link-abbreviated" href="mailto:TRNSYS-users@cae.wisc.edu">TRNSYS-users@cae.wisc.edu</a>
<a class="moz-txt-link-freetext" href="https://mailman.cae.wisc.edu/listinfo/trnsys-users">https://mailman.cae.wisc.edu/listinfo/trnsys-users</a>
</pre>
</blockquote>
<br>
<pre class="moz-signature" cols="72">--
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI 53703 USA
P:+1.608.274.2577
F:+1.608.278.1475
<a class="moz-txt-link-abbreviated" href="mailto:d.bradley@tess-inc.com">d.bradley@tess-inc.com</a>
<a class="moz-txt-link-freetext" href="http://www.tess-inc.com">http://www.tess-inc.com</a>
<a class="moz-txt-link-freetext" href="http://www.trnsys.com">http://www.trnsys.com</a></pre>
</body>
</html>