<html>
<head>
<meta http-equiv="content-type" content="text/html; charset=ISO-8859-1">
</head>
<body alink="#EE0000" bgcolor="#ffffff" link="#0000EE" text="#000000"
vlink="#551A8B">
Dear TRNSYS Users,<br>
<br>
I'm trying to implement a AHU model by coupling every component. AHU
also comprises an adiabatic humidifier modeled by means type 641.<br>
When I try to simulate it, I always receive a message saying that
the entered Relative humidity is greather than 100%.<br>
<br>
Looking in the code I found where the problem come from.<br>
<b>!Check the Inputs for Problems</b><b><br>
</b><b> If ((RHin > 1.) .and. (mode == 2)) Call
FoundBadInput(3,'Fatal','The return air relative humidity is
greater than 100.')</b><br>
<br>
And where inputs are taken correspond to the following part of the
code<br>
<br>
!Get the Current Inputs to the Model<br>
Tin = getInputValue(1) <br>
Win = getInputValue(2) <br>
<b> RHin = getInputValue(3)</b> <font color="#ff0000">!Should it
be <b>RHin = getInputValue(3)/100</b>???</font> (*)<br>
...<br>
<br>
Could somebody tell me, whether this "new type" (it seems to have
been written in other language) uses relative humidity values
between 0-1 (as inputs)?<br>
Or maybe there is a mistake in the code (*)?<br>
Does this model provide output values (RH) in percentage or between
0-1?<br>
<br>
Thanks in advance!<br>
<br>
Roberto Ruiz<br>
<pre class="moz-signature" cols="72">--
_________________________________________________
University of Liège
Faculty of Applied Sciences
Thermodynamics Laboratory
Campus of Sart-Tilman, B49 (P33)
Chemin des Chevreuils, 7
B-4000 LIEGE (BELGIUM)
Phone : +32 4 366 48 25 / +32 496 38 46 82
Fax : +32 4 366 48 12
Mailto : <a class="moz-txt-link-abbreviated" href="mailto:r.ruiz@ulg.ac.be">r.ruiz@ulg.ac.be</a>
Web : <a class="moz-txt-link-freetext" href="http://www.labothap.ulg.ac.be/">http://www.labothap.ulg.ac.be/</a></pre>
<br>
</body>
</html>