Dear Trnsys users,<br><br>I am simulating a large combined cooling/heating system witch includes multiple heating and cooling loads, storage tanks, chillers and heat pumps. The system works fine exept for certain situations. <br>
<br>I am trying to conrol a source side and a load side pump of a heat pump in a following way: When a storage tank (source side) temperature is lower than 0 C, the pumps stop. When the storage tank temperature is higher than 0 C, the pumps are controlled by a Type2 aquastat. Problems occur when the storage tank temperature drops lower than 0 C. In this case the pumps stop (so the control function is fine), but the simulation starts to get real slow and it takes a very long time for TRNSYS to calculate even a few hours of simulation time in this situation. Also convergation errors start to appear.<br>
<br>Could it be possible that TRNSYS has problems to solve the equations numerically when the pumps stop and the mass flows drop suddendly to zero? I have had similiar problems seweral times in other situations when a large mass flow drops suddendly to zero in a large system...<br>
<br>Does anyone know how to get rid of this problem so that TRNSYS could handle this kind of situations?<br><br>best regards,<br><br>Santeri Siren<br>