<font color="#3333ff"><font><font face="arial,helvetica,sans-serif">Dear all,</font></font></font><div><font color="#3333ff"><font><font face="arial,helvetica,sans-serif"><br></font></font></font></div><div><font color="#3333ff"><font><font face="arial,helvetica,sans-serif">Has anybody had experience in editing the weather data in TRNSYS? I'm trying to verify a simulation result from MATLAB-SIMULINK. Sinusoidal temperature was used in that simulation and I tried to plug in those numbers into a weather data. But I found when the replaced data is far away from the replacing data, the outcome is right, expected sinusoidal temperature; when the replaced data is close to the replacing data, there're lots of glitches. The other thing is, how can I edit the weather data file to give the desired solar irradiation? I mean I want to use the same numbers for solar irradiation used in MATLAB-SIMULINK. Any suggestion or comment will be greatly appreciated. Thanks.</font></font></font></div>
<div><font color="#3333ff"><font><font face="arial,helvetica,sans-serif"><br></font></font></font></div><div><font color="#3333ff"><font><font face="arial,helvetica,sans-serif">Enyuan</font></font></font></div>