<html>
  <head>
    <meta content="text/html; charset=UTF-8" http-equiv="Content-Type">
  </head>
  <body bgcolor="#FFFFFF" text="#000000">
    <font size="-1"><font face="Arial">Or sorry, I made a mistake in my
        previous mail :<br>
      </font></font>
    <ul>
      <li><font size="-1"><font face="Arial">Tcool = 35 - 9 * Summer
            (instead of 35*winter  - 9*summer) <br>
          </font></font></li>
    </ul>
    <font size="-1"><font face="Arial">Regarding your heating system it
        may be something like :<br>
      </font></font>
    <ul>
      <li><font size="-1"><font face="Arial">Theat = 21*Winter</font></font></li>
    </ul>
    <font size="-1"><font face="Arial">Regarding your attached picture,
        your heating system seems to work all the time. <br>
        In summer, either you cool at 21°C, either there is no internal
        gains defined, and you heat at 21°C.<br>
        Check your differents inputs.<br>
        You can procede step by step (internal gain = 0, ventilation =
        0, infiltration rate = 0...) to see the influence of each
        parameters in your model to catch your issue.<br>
        <br>
        Best regards<br>
      </font></font>
    <div class="moz-signature">
      <hr align="LEFT" color="#3300FF" size="2" width="450">
      <table border="0">
        <tbody>
          <tr>
            <td rowspan="3" width="120">
              <center><a href="http://www.itf.biz"><img
                    src="cid:part1.01040606.03010405@itf.biz"
                    alt="www.itf.biz" border="0" height="103" width="66"></a><br>
                <font color=" #0000FF" face="CALIBRI" size="1"><a
                    href="http://www.itf.biz">www.itf.biz</a></font></center>
            </td>
            <td colspan="2"><font color="#000000" face="CALIBRI"
                size="2">Adrien JEZEQUEL<br>
                Simulations Thermiques Dynamiques</font></td>
          </tr>
          <tr>
            <td align="LEFT"> <font color="#0000FF" face="CALIBRI"
                size="4"><b>ITF</b></font><br>
            </td>
            <td><font color="#0000FF" face="CALIBRI" size="2">62, Rue du
                Bolliet<br>
                73230 St Alban Leysse<br>
                FRANCE<br>
              </font></td>
          </tr>
          <tr>
            <td align="LEFT" width="40"><font color="#0000FF"
                face="CALIBRI" size="2"> Phone :<br>
                Fax :<br>
                Mail:<br>
              </font>
            </td>
            <td><font color="#0000FF" face="CALIBRI" size="2"> +33(0)
                479 750 029<br>
                +33(0) 479 852 122<br>
                <a class="moz-txt-link-freetext"
                  href="mailto:a.jezequel@itf.biz">a.jezequel@itf.biz</a>
                ou <a class="moz-txt-link-freetext"
                  href="mailto:aj@itf.biz">aj@itf.biz</a></font></td>
          </tr>
        </tbody>
      </table>
      <i><font color="#008000" face="CALIBRI" size="1">Afin de
          contribuer au respect de l'environnement, merci de n'imprimer
          cet e-mail que si nécessaire<br>
          <font color="#008000" face="CALIBRI" size="1">Please, consider
            our environmental responsability before printing this email<br>
          </font></font></i><font color="#008000" face="CALIBRI"
        size="1"><font color="#008000" face="CALIBRI" size="1">
        </font></font></div>
    <br>
    Le 12/06/2012 17:47, 王洋 a écrit :
    <blockquote
cite="mid:CABF0dEv=1=sdSQ9o=a9n880m12t_OORzmf9ZDE1E3WEwRT9HVg@mail.gmail.com"
      type="cite"><font size="4">Dear Adrien Jezequel,<br>
        <br>
      </font><font color="#000000" size="4">Many thanks!</font><font
        size="4"><br style="color:rgb(51,51,255)">
      </font>
      <p style="color:rgb(51,51,255)"><font size="4">I think you'd
          better put for cooling temperatures <br>
        </font> </p>
      <font size="4"><span style="color:rgb(51,51,255)"> </span></font>
      <ul style="color:rgb(51,51,255)">
        <li><font size="4">35°C in winter (no cool) - heating
            temperature at 21°C<br>
          </font> </li>
        <li><font size="4">24°C in summer</font></li>
      </ul>
      <font size="4"><span style="color:rgb(51,51,255)"> which may be
          translated in an equation tool by something like :</span><br
          style="color:rgb(51,51,255)">
        <span style="color:rgb(51,51,255)"> </span></font>
      <ul style="color:rgb(51,51,255)">
        <li><font size="4">summer = GE(TIME,2162)*LT(TIME,6552)</font></li>
        <li><font size="4">winter = 1 - summer<br>
          </font> </li>
        <li><font size="4">Tcool = 35*Winter - 9*Summer</font></li>
      </ul>
      <font size="4">For <span style="color:rgb(51,51,255)">Tcool =
          35*Winter - 9*Summer</span>, do you mean if in winter, Tcool =
        35 °C, so Cooling doesn't work ; if in summer, Tcool = -9°C or
        24 °C?<br>
        <br>
        Meanwhile, another weird phenomena appear: After running based
        on your solution in winter, indoor temperature becomes 35 °C
        also not 21 °C, although I set heating temperature as 21 °C; in
        summer, however, indoor temperature becomes 21 °C. Please see
        the Attached On-Line Plotter image.<br>
        Furthermore, when I create another Tcool equation as <span
          style="color:rgb(51,51,255)">35*winter+24*summer</span>, the
        result is also like the Attached On-Line Plotter image.<br>
        <br>
        Please give me some solutions or advices! <br>
        I think the point how to set that Cooling doesn't work in
        winter? The possible reason of that problem is that I also set a
        Mechanical Ventilation in winter (Tset=19 °C) and summer </font><font
        size="4">(Tset=17 °C). I guess Maybe </font><font size="4">the
        Mechanical Ventilation will influence on Cooling and heating?</font><br>
      <font size="4"><br>
        Many thanks in advance!<br>
        <br>
        Br.<br>
        <br>
        wang  </font><br>
      <br>
      <br>
      <div class="gmail_quote">2012/6/12 <span dir="ltr"><<a
            moz-do-not-send="true"
            href="mailto:trnsys-users-request@cae.wisc.edu"
            target="_blank">trnsys-users-request@cae.wisc.edu</a>></span><br>
        <blockquote class="gmail_quote" style="margin:0 0 0
          .8ex;border-left:1px #ccc solid;padding-left:1ex">Send
          TRNSYS-users mailing list submissions to<br>
                 <a moz-do-not-send="true"
            href="mailto:trnsys-users@cae.wisc.edu">trnsys-users@cae.wisc.edu</a><br>
          <br>
          To subscribe or unsubscribe via the World Wide Web, visit<br>
                 <a moz-do-not-send="true"
            href="https://mailman.cae.wisc.edu/listinfo/trnsys-users"
            target="_blank">https://mailman.cae.wisc.edu/listinfo/trnsys-users</a><br>
          or, via email, send a message with subject or body 'help' to<br>
                 <a moz-do-not-send="true"
            href="mailto:trnsys-users-request@cae.wisc.edu">trnsys-users-request@cae.wisc.edu</a><br>
          <br>
          You can reach the person managing the list at<br>
                 <a moz-do-not-send="true"
            href="mailto:trnsys-users-owner@cae.wisc.edu">trnsys-users-owner@cae.wisc.edu</a><br>
          <br>
          When replying, please edit your Subject line so it is more
          specific<br>
          than "Re: Contents of TRNSYS-users digest..."<br>
          <br>
          Today's Topics:<br>
          <br>
            1. Re: TRNSYS-users Digest, Vol 90, Issue 23<br>
               (<a moz-do-not-send="true"
            href="mailto:jose.gonzalez@imdea.org">jose.gonzalez@imdea.org</a>)<br>
            2. Re: weird Qcool (ITF - Adrien JEZEQUEL)<br>
            3. Flue gas stack in TRNSYS (Mazen Darwish)<br>
            4. AutoReply: TRNSYS-users Digest, Vol 90, Issue 23<br>
               (<a moz-do-not-send="true"
            href="mailto:kelelo1@kelelo.com">kelelo1@kelelo.com</a>)<br>
          <br>
          <br>
          ---------- 已转发邮件 ----------<br>
          From: <<a moz-do-not-send="true"
            href="mailto:jose.gonzalez@imdea.org">jose.gonzalez@imdea.org</a>><br>
          To: <a moz-do-not-send="true"
            href="mailto:trnsys-users@cae.wisc.edu">trnsys-users@cae.wisc.edu</a><br>
          Cc: <br>
          Date: Tue, 12 Jun 2012 14:56:21 +0200 (CEST)<br>
          Subject: Re: [TRNSYS-users] TRNSYS-users Digest, Vol 90, Issue
          23<br>
          I am out of the office from Monday, June 11 to Friday, June 15
          and unable to respond at this time.<br>
          <br>
          For any urgent matters, please contact Dr. Manuel Romero (<a
            moz-do-not-send="true"
            href="http://manuel.romero_at_imdea.org" target="_blank">manuel.romero_at_imdea.org</a>).<br>
          <br>
          Thank you for your understanding.<br>
          <br>
          Best regards,<br>
          <br>
          José Gonzalez-Aguilar<br>
          <br>
          <br>
          <br>
          ---------- 已转发邮件 ----------<br>
          From: ITF - Adrien JEZEQUEL <<a moz-do-not-send="true"
            href="mailto:a.jezequel@itf.biz">a.jezequel@itf.biz</a>><br>
          To: <a moz-do-not-send="true"
            href="mailto:trnsys-users@cae.wisc.edu">trnsys-users@cae.wisc.edu</a><br>
          Cc: <br>
          Date: Tue, 12 Jun 2012 15:26:28 +0200<br>
          Subject: Re: [TRNSYS-users] weird Qcool<br>
          <div bgcolor="#FFFFFF" text="#000000"> <font size="-1"><font
                face="Arial">Dear Wang,<br>
                <br>
                As far as I understand, the cooling set temperature you
                define in your model is :<br>
              </font></font>
            <ul>
              <li><font size="-1"><font face="Arial">24°C in summer,
                    which seems to be correct</font></font></li>
              <li><font size="-1"><font face="Arial">and 0°C in
                    winter... which seems to be wrong, since you don't
                    refresh your thermal zone at 0°C in winter!<br>
                  </font></font></li>
            </ul>
            T<font size="-1"><font face="Arial">hat's why you obtain
                huge cooling loads.<br>
                BAL_ENERGY is not 0 because you heat and cool in the
                same time in winter.<br>
              </font></font>
            <p>I think you'd better put for cooling temperatures <br>
            </p>
            <ul>
              <li>35°C in winter (no cool) - heating temperature at 21°C<br>
              </li>
              <li>24°C in summer</li>
            </ul>
            which may be translated in an equation tool by something
            like :<br>
            <ul>
              <li>summer = GE(TIME,2162)*LT(TIME,6552)</li>
              <li>winter = 1 - summer<br>
              </li>
              <li>Tcool = 35*Winter - 9*Summer</li>
            </ul>
            <p>Best regards<br>
            </p>
            <div>
              <hr align="LEFT" color="#3300FF" size="2" width="450">
              <table border="0">
                <tbody>
                  <tr>
                    <td rowspan="3" width="120">
                      <center><a moz-do-not-send="true"
                          href="http://www.itf.biz" target="_blank"><img
                            src="cid:part18.00070906.07070509@itf.biz"
                            alt="www.itf.biz" border="0" height="103"
                            width="66"></a><br>
                        <font color=" #0000FF" face="CALIBRI" size="1"><a
                            moz-do-not-send="true"
                            href="http://www.itf.biz" target="_blank">www.itf.biz</a></font></center>
                    </td>
                    <td colspan="2"><font color="#000000" face="CALIBRI">Adrien
                        JEZEQUEL<br>
                        Simulations Thermiques Dynamiques</font></td>
                  </tr>
                  <tr>
                    <td align="LEFT"> <font color="#0000FF"
                        face="CALIBRI" size="4"><b>ITF</b></font><br>
                    </td>
                    <td><font color="#0000FF" face="CALIBRI">62, Rue du
                        Bolliet<br>
                        73230 St Alban Leysse<br>
                        FRANCE<br>
                      </font></td>
                  </tr>
                  <tr>
                    <td align="LEFT" width="40"><font color="#0000FF"
                        face="CALIBRI"> Phone :<br>
                        Fax :<br>
                        Mail:<br>
                      </font> </td>
                    <td><font color="#0000FF" face="CALIBRI"> +33(0) 479
                        750 029<br>
                        <a moz-do-not-send="true"
                          href="tel:%2B33%280%29%20479%20852%20122"
                          value="+33479852122" target="_blank">+33(0)
                          479 852 122</a><br>
                        <a moz-do-not-send="true"
                          href="mailto:a.jezequel@itf.biz"
                          target="_blank">a.jezequel@itf.biz</a> ou <a
                          moz-do-not-send="true"
                          href="mailto:aj@itf.biz" target="_blank">aj@itf.biz</a></font></td>
                  </tr>
                </tbody>
              </table>
              <i><font color="#008000" face="CALIBRI" size="1">Afin de
                  contribuer au respect de l'environnement, merci de
                  n'imprimer cet e-mail que si nécessaire<br>
                  <font color="#008000" face="CALIBRI" size="1">Please,
                    consider our environmental responsability before
                    printing this email<br>
                  </font></font></i><font color="#008000" face="CALIBRI"
                size="1"><font color="#008000" face="CALIBRI" size="1">
                </font></font></div>
            <br>
            Le 12/06/2012 14:55, 王洋 a écrit :
            <blockquote type="cite"><font size="4">Dear all,<br>
                <br>
                I make a simulation. The cooling set temperature is
                24*Summer schedule (2162 h to 6552 h), The heating set
                temperature is 21*Winter schedule (the rest hours).
                After running, however, it appears WEIRD phenomenon.
                Please see the ATTACHED Energy_zone.BAL file. During the
                winter period, there are Qcools and Qcool is very large
                up to 47000 kJ. And then it results in wrong BAL_ENERG,
                it is not 0.<br>
                <br>
                Please give me some advices and solutions to that!<br>
                <br>
                Many thanks in advance!<br>
                <br>
                Br.<br>
                <br>
                wang  </font><br>
              <br>
              <div class="gmail_quote">2012/6/11 <span dir="ltr"><<a
                    moz-do-not-send="true"
                    href="mailto:trnsys-users-request@cae.wisc.edu"
                    target="_blank">trnsys-users-request@cae.wisc.edu</a>></span><br>
                <blockquote class="gmail_quote" style="margin:0 0 0
                  .8ex;border-left:1px #ccc solid;padding-left:1ex">Send
                  TRNSYS-users mailing list submissions to<br>
                         <a moz-do-not-send="true"
                    href="mailto:trnsys-users@cae.wisc.edu"
                    target="_blank">trnsys-users@cae.wisc.edu</a><br>
                  <br>
                  To subscribe or unsubscribe via the World Wide Web,
                  visit<br>
                         <a moz-do-not-send="true"
                    href="https://mailman.cae.wisc.edu/listinfo/trnsys-users"
                    target="_blank">https://mailman.cae.wisc.edu/listinfo/trnsys-users</a><br>
                  or, via email, send a message with subject or body
                  'help' to<br>
                         <a moz-do-not-send="true"
                    href="mailto:trnsys-users-request@cae.wisc.edu"
                    target="_blank">trnsys-users-request@cae.wisc.edu</a><br>
                  <br>
                  You can reach the person managing the list at<br>
                         <a moz-do-not-send="true"
                    href="mailto:trnsys-users-owner@cae.wisc.edu"
                    target="_blank">trnsys-users-owner@cae.wisc.edu</a><br>
                  <br>
                  When replying, please edit your Subject line so it is
                  more specific<br>
                  than "Re: Contents of TRNSYS-users digest..."<br>
                  <br>
                  Today's Topics:<br>
                  <br>
                    1. Re: TRNSYS-users Digest, Vol 90, Issue 21<br>
                       (<a moz-do-not-send="true"
                    href="mailto:jose.gonzalez@imdea.org"
                    target="_blank">jose.gonzalez@imdea.org</a>)<br>
                    2. AutoReply: TRNSYS-users Digest, Vol 90, Issue 21<br>
                       (<a moz-do-not-send="true"
                    href="mailto:kelelo1@kelelo.com" target="_blank">kelelo1@kelelo.com</a>)<br>
                    3. type666 (Andr?s Montero)<br>
                    4. Type 673 heating problem (Santeri Siren)<br>
                  <br>
                  <br>
                  ---------- 已转发邮件 ----------<br>
                  From: <<a moz-do-not-send="true"
                    href="mailto:jose.gonzalez@imdea.org"
                    target="_blank">jose.gonzalez@imdea.org</a>><br>
                  To: <a moz-do-not-send="true"
                    href="mailto:trnsys-users@cae.wisc.edu"
                    target="_blank">trnsys-users@cae.wisc.edu</a><br>
                  Cc: <br>
                  Date: Mon, 11 Jun 2012 16:07:28 +0200 (CEST)<br>
                  Subject: Re: [TRNSYS-users] TRNSYS-users Digest, Vol
                  90, Issue 21<br>
                  I am out of the office from Monday, June 11 to Friday,
                  June 15 and unable to respond at this time.<br>
                  <br>
                  For any urgent matters, please contact Dr. Manuel
                  Romero (<a moz-do-not-send="true"
                    href="http://manuel.romero_at_imdea.org"
                    target="_blank">manuel.romero_at_imdea.org</a>).<br>
                  <br>
                  Thank you for your understanding.<br>
                  <br>
                  Best regards,<br>
                  <br>
                  José Gonzalez-Aguilar<br>
                  <br>
                  <br>
                  <br>
                  ---------- 已转发邮件 ----------<br>
                  From: <a moz-do-not-send="true"
                    href="mailto:kelelo1@kelelo.com" target="_blank">kelelo1@kelelo.com</a><br>
                  To: <a moz-do-not-send="true"
                    href="mailto:trnsys-users@cae.wisc.edu"
                    target="_blank">trnsys-users@cae.wisc.edu</a><br>
                  Cc: <br>
                  Date: Mon, 11 Jun 2012 14:10:47 GMT<br>
                  Subject: [TRNSYS-users] AutoReply: TRNSYS-users
                  Digest, Vol 90, Issue 21<br>
                  <br>
                  I will be out of the office from June 8 - 23 on a
                  backpacking trip with my son and his Venture Crew at
                  Philmont Scout Ranch in New Mexico. I will not have
                  access to email or phone service while I am gone, but
                  I will reply to your message as soon as possible after
                  I return to the office on Monday, June 25th.<br>
                  <br>
                  Thank you for your patience,<br>
                  Mark Thornbloom<br>
                  <br>
                  <br>
                  <br>
                  <br>
                  ---------- 已转发邮件 ----------<br>
                  From: "Andrés Montero" <<a moz-do-not-send="true"
                    href="mailto:andresmonteroi@gmail.com"
                    target="_blank">andresmonteroi@gmail.com</a>><br>
                  To: <a moz-do-not-send="true"
                    href="mailto:trnsys-users@cae.wisc.edu"
                    target="_blank">trnsys-users@cae.wisc.edu</a><br>
                  Cc: <br>
                  Date: Mon, 11 Jun 2012 16:57:30 +0200<br>
                  Subject: [TRNSYS-users] type666<br>
                  Dear Trnsys users,
                  <div><br>
                  </div>
                  <div>In order to simulate a water-cooled chiller,
                    first I need to create the 2 external files for this
                    component. </div>
                  <div>I'm trying to find some catalogues with
                    information of a 40 to 45 kW water-cooled chiller
                    but the web pages I run into it, ask me to register,
                    but I'm still waiting the username and pasword. Does
                    anyone has a catalgoue with this type of info
                    regarding this cooling capacity machine?</div>
                  <div><br>
                  </div>
                  <div>Best regards,</div>
                  <div><br>
                  </div>
                  <div>Andrés<br clear="all">
                    <div><br>
                    </div>
                    -- <br>
                    Andrés Montero I.<br>
                    <br>
                  </div>
                  <br>
                  <br>
                  ---------- 已转发邮件 ----------<br>
                  From: Santeri Siren <<a moz-do-not-send="true"
                    href="mailto:santeri.siren1@gmail.com"
                    target="_blank">santeri.siren1@gmail.com</a>><br>
                  To: "trnsys käyttäjät" <<a moz-do-not-send="true"
                    href="mailto:trnsys-users@cae.wisc.edu"
                    target="_blank">trnsys-users@cae.wisc.edu</a>><br>
                  Cc: <br>
                  Date: Mon, 11 Jun 2012 19:56:40 +0300<br>
                  Subject: [TRNSYS-users] Type 673 heating problem<br>
                  Dear all,<br>
                  <br>
                  I cant make type673 heating mode to work. Cooling mode
                  works just fine but when I change the cooling control
                  signal to 0 and heating control signal to 1 it doesnt
                  work anymore. When the heating mode is used nothing
                  happens. Does anyone know why?<br>
                  <br>
                  Best regards,<br>
                  Santeri Siren<br>
                  <br>
                  _______________________________________________<br>
                  TRNSYS-users mailing list<br>
                  <a moz-do-not-send="true"
                    href="mailto:TRNSYS-users@cae.wisc.edu"
                    target="_blank">TRNSYS-users@cae.wisc.edu</a><br>
                  <a moz-do-not-send="true"
                    href="https://mailman.cae.wisc.edu/listinfo/trnsys-users"
                    target="_blank">https://mailman.cae.wisc.edu/listinfo/trnsys-users</a><br>
                  <br>
                </blockquote>
              </div>
              <br>
              <br>
              <fieldset></fieldset>
              <br>
              <pre>_______________________________________________
TRNSYS-users mailing list
<a moz-do-not-send="true" href="mailto:TRNSYS-users@cae.wisc.edu" target="_blank">TRNSYS-users@cae.wisc.edu</a>
<a moz-do-not-send="true" href="https://mailman.cae.wisc.edu/listinfo/trnsys-users" target="_blank">https://mailman.cae.wisc.edu/listinfo/trnsys-users</a>
</pre>
            </blockquote>
          </div>
          <br>
          <br>
          ---------- 已转发邮件 ----------<br>
          From: Mazen Darwish <<a moz-do-not-send="true"
            href="mailto:mazentd@gmail.com">mazentd@gmail.com</a>><br>
          To: <a moz-do-not-send="true"
            href="mailto:trnsys-users@cae.wisc.edu">trnsys-users@cae.wisc.edu</a><br>
          Cc: <br>
          Date: Tue, 12 Jun 2012 16:05:51 +0200<br>
          Subject: [TRNSYS-users] Flue gas stack in TRNSYS<br>
          <div>Hello everyone ,</div>
          <div> </div>
          <div>Is there a way to model a flue gas stack in TRNSYS , i
            need to recirculate hot air and flue gases from the
            economizer in an HRSG back to a solar tower .</div>
          <div> </div>
          <div>i appreciate your ideas.</div>
          <div> </div>
          <div>Mazen Darwish</div>
          <div>KTH Royal Institute of Technology</div>
          <div>Department of Energy Technology </div>
          <div>Brinellvägen 68, SE-100 44 Stockholm, Sweden</div>
          <div>Mobile: <a moz-do-not-send="true"
              href="tel:%2B46-%280%29-723%2008%2018%2093"
              value="+46723081893" target="_blank">+46-(0)-723 08 18 93</a> </div>
          <br>
          <br>
          ---------- 已转发邮件 ----------<br>
          From: <a moz-do-not-send="true"
            href="mailto:kelelo1@kelelo.com">kelelo1@kelelo.com</a><br>
          To: <a moz-do-not-send="true"
            href="mailto:trnsys-users@cae.wisc.edu">trnsys-users@cae.wisc.edu</a><br>
          Cc: <br>
          Date: Tue, 12 Jun 2012 14:23:03 GMT<br>
          Subject: [TRNSYS-users] AutoReply: TRNSYS-users Digest, Vol
          90, Issue 23<br>
          <br>
          I will be out of the office from June 8 - 23 on a backpacking
          trip with my son and his Venture Crew at Philmont Scout Ranch
          in New Mexico. I will not have access to email or phone
          service while I am gone, but I will reply to your message as
          soon as possible after I return to the office on Monday, June
          25th.<br>
          <br>
          Thank you for your patience,<br>
          Mark Thornbloom<br>
          <br>
          <br>
          <br>
          _______________________________________________<br>
          TRNSYS-users mailing list<br>
          <a moz-do-not-send="true"
            href="mailto:TRNSYS-users@cae.wisc.edu">TRNSYS-users@cae.wisc.edu</a><br>
          <a moz-do-not-send="true"
            href="https://mailman.cae.wisc.edu/listinfo/trnsys-users"
            target="_blank">https://mailman.cae.wisc.edu/listinfo/trnsys-users</a><br>
          <br>
        </blockquote>
      </div>
      <br>
    </blockquote>
  </body>
</html>