<p class="MsoNormal"><span style="font-family:"Segoe Print"" lang="EN-US">Hi all, </span></p>

<p class="MsoNormal"><span style="font-family:"Segoe Print"" lang="EN-US">I modeled on trnsys
a chilled water system with two type 88, two fans (type 3), two coils (type 52),
two type 92 and just one pump (type 110) </span></p>

<p class="MsoNormal"><span style="font-family:"Segoe Print"" lang="EN-US">I regulate the room’s
temperature with a controller (type 2)</span></p>

<p class="MsoNormal"><span style="font-family:"Segoe Print"" lang="EN-US">I don’t know why
but I change the upper dead band dt for one room like 25 °C for the first room
and 24°C for the other room and when I start the simulation the both room are
going to 25°C, the two rooms have exactly the same behavior. The two rooms have
always the same behavior with different features at the beginning. </span></p>

<p class="MsoNormal"><span style="font-family:"Segoe Print"" lang="EN-US">Maybe because I can’t
use two type 88 in the same project or something like that.</span></p>

<p class="MsoNormal"><span style="font-family:"Segoe Print"" lang="EN-US"> </span></p>

<p class="MsoNormal"><span style="font-family:"Segoe Print"" lang="EN-US">Thank you for your
help</span></p>

<p class="MsoNormal"><span style="font-family:"Segoe Print"" lang="EN-US">Sara</span></p>