<html>
<head>
<meta content="text/html; charset=ISO-8859-1"
http-equiv="Content-Type">
</head>
<body bgcolor="#FFFFFF" text="#000000">
Hi Lee,<br>
<br>
a rule of thumb is 3...4m² per kW of nominal chilling capacity and
but this may vary depending on collector type, driving temperature
needed, system configuration, cooling load, etc.<br>
<br>
You can find quite a good document on SAC here:
<a class="moz-txt-link-freetext" href="http://www.solair-project.eu/122.0.html">http://www.solair-project.eu/122.0.html</a><br>
<br>
Cheers,<br>
<br>
Björn<br>
<br>
Am 29.02.2012 18:04, schrieb hankiat lee:
<blockquote cite="mid:SNT141-W44327277FF030B0CE3CEF9D36F0@phx.gbl"
type="cite">
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 10pt;
font-family:Tahoma
}
--></style>
<div dir="ltr">
<div>Hi,<br>
<br>
Do anyone have any proper steps to size the area of the
thermal collector for absorption chiller use? I can only find
steps for hot water system for a house.<br>
What the range of solar fraction needed? <br>
<br>
Thanks<br>
<br>
Lee<br>
</div>
</div>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
<pre wrap="">_______________________________________________
TRNSYS-users mailing list
<a class="moz-txt-link-abbreviated" href="mailto:TRNSYS-users@cae.wisc.edu">TRNSYS-users@cae.wisc.edu</a>
<a class="moz-txt-link-freetext" href="https://mailman.cae.wisc.edu/listinfo/trnsys-users">https://mailman.cae.wisc.edu/listinfo/trnsys-users</a>
</pre>
</blockquote>
<br>
<br>
<pre class="moz-signature" cols="72">--
Dipl.-Ing. (FH) Björn Nienborg, M.Sc.
Division Thermal Systems and Buildings
Fraunhofer Institut für Solare Energiesysteme ISE
Heidenhofstr. 2, 79110 Freiburg, Germany
Tel.: +49 (0)761 4588-5883 FAX: +49 (0)761 4588-9000
<a class="moz-txt-link-freetext" href="http://www.ise.fraunhofer.de">http://www.ise.fraunhofer.de</a></pre>
</body>
</html>