Dear Trnsys<div><br></div><div>I am experiencing problems with a simple<b> type 2b controller</b>.</div><div><br></div><div>I am using a solar collector type 564b</div><div><br></div><div>I am trying to compare the temperature of the output of the collector with output of the tank, getting a temperature difference. I have set the dead band from 4-10 degrees C.</div>
<div><br></div><div>In the simulation as the temperature rises to 10degrees difference, the control signal is 1 switching the pump on correctly. but after this the controller only switches every time step. I have tried shortening the time step... and changing other parameters.. still with no success.</div>
<div><br></div><div>I have attached the file.</div><div><br></div><div>Yours Sincerely</div><div><br></div><div>Mike Bissett</div><div><br></div><div>Department of Electrical Engineering</div><div>University of Cape Town </div>
<div>South Africa</div>