<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html; charset=UTF-8" http-equiv="Content-Type">
</head>
<body text="#000000" bgcolor="#ffffff">
Wang,<br>
It depends on what the pressure difference was during your test!
Typical test data is reported at a 50 Pa pressure difference but if
that isn't what you used when you measured the infiltration rate
then this "typical" value is irrelevant.<br>
David<br>
<br>
<br>
On 7/5/2011 10:59, 王洋 wrote:
<blockquote
cite="mid:CABF0dEtwUxu8awBVoMfCO67pojm+zJEFXvAFt0iDgBZbxEPXnQ@mail.gmail.com"
type="cite">
<div>Dear Mr. Bradley,</div>
<div> </div>
<div> Thanks for your reply!</div>
<div> </div>
<div> I only want to compare the actual measurement value with
the TRNFlow results. I made an experiment in our test room and
got the infiltration rate as 0.4 1/h using the tracer gas, but I
didn't know the pressure difference value between indoor and
outdoor at that time. Then I used TRNFlow's TEST DATA to set
this infiltration rate 0.4 and test and compare the TRNFlow
result with the actual measurement result. As you know, the TEST
DATA need the pressure difference value between indoor and
outdoor. So I asked you about how many Pas I should set?</div>
<div> </div>
<div> thanks!</div>
<div> </div>
<div>Br.</div>
<div> </div>
<div>wang<br>
<br>
</div>
<div class="gmail_quote">2011/7/5 David BRADLEY <span dir="ltr"><<a
moz-do-not-send="true" href="mailto:d.bradley@tess-inc.com">d.bradley@tess-inc.com</a>></span><br>
<blockquote style="border-left: 1px solid rgb(204, 204, 204);
margin: 0px 0px 0px 0.8ex; padding-left: 1ex;"
class="gmail_quote">
<div bgcolor="#ffffff" text="#000000">Wang,<br>
If you are defining the pressure difference value in the
test data option then typically you would have the results
of a "blower door" test in which a special door containing a
computer controlled fan is installed in the building. The
fan is run at different speeds to force a pressure
difference between indoors and outdoors. Running the fan at
various speeds can give you an estimate of the total leakage
area of the building. If you are working with a building
design (instead of with an actual building) then you can't
really use the "test data" type of opening in TRNFlow. You
need to use the more theoretical opening types.<br>
Regards,<br>
<font color="#888888"> David</font>
<div>
<div class="h5"><br>
<br>
<br>
On 7/4/2011 08:14, 王洋 wrote:
<blockquote type="cite">
<div>Dear Mr. Bradley,</div>
<div> </div>
<div> Thanks for your patient reply!</div>
<div> </div>
<div> To the pressure difference between indoors and
outdoors:</div>
<div>Do you mean it's difficult to use some measuring
devices and methods to test it? Whether there is no
an Maths Equation to calculate this value according
to known data e.g. building height, wind spead etc.?
</div>
<div> </div>
<div> Because I need one pressure difference(pa)
value in Test Data Option of TRNFLOW.</div>
<div> </div>
<div> Many thanks!</div>
<div> </div>
<div> br.</div>
<div> </div>
<div>wang <br>
<br>
<br>
</div>
<div class="gmail_quote">2011/7/1 王洋 <span dir="ltr"><<a
moz-do-not-send="true"
href="mailto:wanghongyang1767@gmail.com"
target="_blank">wanghongyang1767@gmail.com</a>></span><br>
<blockquote style="border-left: 1px solid rgb(204,
204, 204); margin: 0px 0px 0px 0.8ex;
padding-left: 1ex;" class="gmail_quote">
<div><br>
</div>
<div>
<div>
<div class="gmail_quote">2011/3/16 David
BRADLEY <span dir="ltr"><<a
moz-do-not-send="true"
href="mailto:d.bradley@tess-inc.com"
target="_blank">d.bradley@tess-inc.com</a>></span><br>
<blockquote style="border-left: 1px solid
rgb(204, 204, 204); margin: 0px 0px 0px
0.8ex; padding-left: 1ex;"
class="gmail_quote">
<div bgcolor="#ffffff" text="#000000">Wang,<br>
Chapter 18 is the one you need; look
specifically on page 18.19 at the
mathematical description of the
conduction process through the walls.<br>
<br>
As for your question about pressure
differences, the pressure difference
between indoors and outdoors varies with
a great many factors (windspeed,
direction, obstructions, building
height, the nature of the openings in
the building facades, etc.). In many
tests, the flow through an opening with
a 50Pa pressure difference is given.
Whether a 50Pa pressure difference is
average or extreme, however, depends on
the building.<br>
Regards,<br>
David
<div>
<div><br>
<br>
<br>
On 3/16/2011 08:25, 王洋 wrote:
<blockquote type="cite"><br>
<br>
<div class="gmail_quote">Dear Mr.
Bradley,<br>
<br>
But I cann't find the
ASHRAE Handbook of Fundamentals
about<br>
the Conduction Transfer
Function methodology. My ASHRAE
Handbook of Fundamentals is 2009
version.<br>
The chapter 4 Heat transfer and
Chapter 6 Mass transfer have no
informations about transfer
function coefficients.<br>
Please tell me which chapter of
the ASHRAE Handbook of
Fundamentals contains transfer
function coefficients etc.?<br>
<br>
PLUS: <font face="Arial"
size="2"><span>In </span></font>Test
Data Option of TRNFLOW : about
the pressure difference(pa).
Please tell me normally what's
the pressure differnce between
outside and inside in winter or
summer? The trnflow manual <font
face="Arial" size="2"><span>and
Example Rest_com.tpf </span></font>have
no detailed introduction. I
tried also 20 pa or 0 pa etc. Is
it OK? <br>
<br>
Many thanks!<br>
<br>
Br.<br>
<br>
wang<br>
<br>
<br>
<br>
<br>
<br>
<div>
<div>><br>
><br>
> Wang,<br>
> The thermal time
constant for a zone in your
building is not a simple<br>
> thing to compute. It
has to do with the materials
in the wall, the<br>
> placement<br>
> of the mass within the
wall, the capacitance of the
zone, ventilation,<br>
> infiltration, gains,
solar radiation, etc. I
would think that the easiest<br>
> way to get an estimate
of the zone's thermal time
constant is to impose a<br>
> step change in one
input on it - step change
the ambient temperature
while<br>
> holding all other
inputs constant for example.<br>
><br>
> The numbers that you
see in the *.inf file are
transfer function<br>
> coefficients. You can
read in the ASHRAE Handbook
of Fundamentals about<br>
> the<br>
> Conduction Transfer
Function methodology.<br>
> Regards,<br>
> David<br>
><br>
><br>
><br>
> On 11/3/2010 09:29, 王洋
wrote:<br>
><br>
> Dear all,<br>
><br>
> 1. How to calculate or
find the thermal time
constant of zone in TRNSYS<br>
> software?<br>
><br>
> ---------- WALL TYPE
BST_FL_HEAT_W1
----------<br>
><br>
> THERMAL
CONDUCTANCE, U= 67.80000
kJ/h m2K; U-Wert=
4.48235<br>
> W/m2K<br>
> (incl.
alpha_i=7.7 W/m^2 K and
alpha_o=25 W/m^2 K)<br>
><br>
>
TRANSFERFUNCTION
COEFFICIENTS<br>
> K A
B C
D<br>
><br>
> 0
1.7050117E+02
2.1087019E+01
1.7050117E+02<br>
> 1.0000000E+00<br>
> 1
-1.1800059E+02
3.5808933E+01
-1.1800059E+02<br>
> -1.3683139E-01<br>
> 2
6.0267372E+00
1.6298573E+00
6.0267372E+00<br>
> 4.7362566E-05<br>
> 3
-1.2736107E-03
2.3363784E-04
-1.2736107E-03<br>
> SUM
5.8526043E+01
5.8526043E+01
5.8526043E+01<br>
> 8.6321597E-01<br>
> What's meaning of A B C
D? Are they Wall's
TRANSFERFUNCTION
COEFFICIENTS?<br>
> And what is the thermal
time constant of the whole
zone? How to calculate<br>
> or<br>
> find the thermal time
constant of the whole zone
in TRNSYS software?<br>
> Need I calculate by
myself the whole zone's
TRANSFERFUNCTION based on<br>
> all<br>
> the walls of the zone
or others?<br>
><br>
> 2. How to calculate or
find air volume flow of the
window opening in<br>
> TRNFlow software?<br>
> The window opening
area (m2)is known. Whether
it needs the wind<br>
> speed(m/s)<br>
> or not?<br>
><br>
> Many thanks!<br>
><br>
> Br.<br>
><br>
> wang<br>
> 2010/11/3 <<a
moz-do-not-send="true"
href="mailto:trnsys-users-request@cae.wisc.edu"
target="_blank">trnsys-users-request@cae.wisc.edu</a>><br>
><br>
>> Send TRNSYS-users
mailing list submissions to<br>
>> <a
moz-do-not-send="true"
href="mailto:trnsys-users@cae.wisc.edu"
target="_blank">trnsys-users@cae.wisc.edu</a><br>
>><br>
>> To subscribe or
unsubscribe via the World
Wide Web, visit<br>
>> <a
moz-do-not-send="true"
href="https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users"
target="_blank">https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users</a><br>
>> or, via email, send
a message with subject or
body 'help' to<br>
>> <a
moz-do-not-send="true"
href="mailto:trnsys-users-request@cae.wisc.edu"
target="_blank">trnsys-users-request@cae.wisc.edu</a><br>
>><br>
>> You can reach the
person managing the list at<br>
>> <a
moz-do-not-send="true"
href="mailto:trnsys-users-owner@cae.wisc.edu"
target="_blank">trnsys-users-owner@cae.wisc.edu</a><br>
>><br>
>> When replying,
please edit your Subject
line so it is more specific<br>
>> than "Re: Contents
of TRNSYS-users digest..."<br>
>><br>
>> Today's Topics:<br>
>><br>
>> 1. Re: GenOpt
optimization: problem for
the second generation<br>
>> after 5
simulations (Thibaut VITTE)<br>
>> 2. Re: google
sketchup+trnsys3d (hotline)<br>
>> 3. input file
(Emiliano Casati - 3ME)<br>
>> 4. Re: GenOpt
optimization: problem for
the secondgeneration<br>
>> after 5
simulations (Timothy
McDowell)<br>
>><br>
>><br>
>> ---------- 已转发邮件
----------<br>
>> From: Thibaut VITTE
<<a
moz-do-not-send="true"
href="mailto:thibaut.vitte@h3c-energies.fr"
target="_blank">thibaut.vitte@h3c-energies.fr</a>><br>
>> To: <a
moz-do-not-send="true"
href="mailto:trnsys-users@cae.wisc.edu"
target="_blank">trnsys-users@cae.wisc.edu</a><br>
>> Date: Wed, 03 Nov
2010 11:27:53 +0100<br>
>> Subject: Re:
[TRNSYS-users] GenOpt
optimization: problem for
the second<br>
>> generation after 5
simulations<br>
>> Dear Alexis,<br>
>><br>
>> I've had a similar
error when I used Genopt.
I've had several components<br>
>> tracked by a
"trace" command that made my
list file enormous (more
than<br>
>> 100Mb) and genopt
could'nt handle that amount
of data.<br>
>><br>
>> Just my 2cents.<br>
>><br>
>> Thibaut<br>
>> --<br>
>><br>
>> Le futur maîtrisé<br>
>><br>
>> Thibaut VITTE<br>
>><br>
>> Docteur - Ingénieur
Energies<br>
>><br>
>> Mail : <a
moz-do-not-send="true"
href="mailto:thibaut.vitte@h3c-energies.fr"
target="_blank">thibaut.vitte@h3c-energies.fr</a><br>
>><br>
>>
-----------------------------<br>
>><br>
>> H3C-énergies<br>
>><br>
>> 35, chemin du vieux
Chêne - 38240 MEYLAN<br>
>><br>
>> Tél : 04 76 41 88
66 – Fax : 04 76 41 28 94<br>
>><br>
>> <a
moz-do-not-send="true"
href="http://www.h3c-energies.fr/"
target="_blank">www.h3c-energies.fr</a><br>
>><br>
>><br>
>>
-----------------------------------------------------------------------------------<br>
>><br>
>> Afin de contribuer
au respect de
l'environnement, merci de
n'imprimer ce<br>
>> message qu'en cas
de nécessité.<br>
>><br>
>> In order to respect
the environment, please
don't print this e-mail<br>
>> unless<br>
>> you really need to.<br>
>><br>
>><br>
>> ---------- 已转发邮件
----------<br>
>> From: "hotline"
<<a
moz-do-not-send="true"
href="mailto:hotline@transsolar.com"
target="_blank">hotline@transsolar.com</a>><br>
>> To: "julia.feste"
<<a
moz-do-not-send="true"
href="mailto:julia.feste@whitepavilion.com.cn"
target="_blank">julia.feste@whitepavilion.com.cn</a>><br>
>> Date: Wed, 3 Nov
2010 11:37:08 +0100<br>
>> Subject: Re:
[TRNSYS-users] google
sketchup+trnsys3d<br>
>> Hi,<br>
>><br>
>> that's a well known
problem that will be fixed
in the next version.<br>
>> Hopefully upcoming
within the next weeks.<br>
>><br>
>> Regards<br>
>> Christian<br>
>><br>
>> TRANSSOLAR Software
Team<br>
>> <a
moz-do-not-send="true"
href="mailto:hotline@transsolar.com"
target="_blank">hotline@transsolar.com</a><br>
>><br>
>> <a
moz-do-not-send="true"
href="http://www.trnsys.de/"
target="_blank">www.trnsys.de</a><br>
>> Transsolar
KlimaEngineering -
Technologien für
energieeffizientes Bauen<br>
>> und Nutzerkomfort
in Gebäuden<br>
>> Transsolar
Energietechnik GmbH,
Curiestrasse 2, 70563
Stuttgart /<br>
>> Amtsgericht
Stuttgart - HRB 23347 /
USt-IdNr.: 99073/00911<br>
>> Geschäftsführer:
Dipl.Ing. Matthias Schuler,
Dipl.Ing. Thomas Auer,<br>
>> Dipl.Phys. Stefan
Holst, Prof. Volkmar
Bleicher<br>
>><br>
>> -----Ursprüngliche
Nachricht-----<br>
>> Von: julia.feste
[mailto:<a
moz-do-not-send="true"
href="mailto:julia.feste@whitepavilion.com.cn"
target="_blank">julia.feste@whitepavilion.com.cn</a>]<br>
>> Gesendet: Mittwoch,
3. November 2010 06:46<br>
>> An: <a
moz-do-not-send="true"
href="mailto:trnsys-users@cae.wisc.edu"
target="_blank">trnsys-users@cae.wisc.edu</a><br>
>> Betreff:
[TRNSYS-users] google
sketchup+trnsys3d<br>
>><br>
>><br>
>> Hello everybody,<br>
>> Thanks for your
posts that's always really
interesting!<br>
>> I come up with a
problem using Google
Sketchup and TRNSYS3D:
inside a<br>
>> TRNSYS zone, I
draft a square, then I want
to pull it up at a certain<br>
>> height, so I write
the number then Enter, and
this error appears:<br>
>><br>
>> <-----Beginning
of the error-----><br>
>> ERROR:<br>
>> NoMethodError<br>
>> undefined method
`position' for<br>
>>
#<Sketchup::AttributeDictionary:0xfcb4eb8><br>
>><br>
>> BACKTRACE:<br>
>> C:/Program
Files/Google/Google SketchUp<br>
>>
8/Plugins/Trnsys3d/sketchup/Sketchup.rb:309:in
`polygon_loop'<br>
>> C:/Program
Files/Google/Google SketchUp<br>
>>
8/Plugins/Trnsys3d/sketchup/Sketchup.rb:309:in
`each'<br>
>> C:/Program
Files/Google/Google SketchUp<br>
>>
8/Plugins/Trnsys3d/sketchup/Sketchup.rb:309:in
`polygon_loop'<br>
>> C:/Program
Files/Google/Google SketchUp<br>
>>
8/Plugins/Trnsys3d/sketchup/Sketchup.rb:321:in
`outer_polygon'<br>
>> C:/Program
Files/Google/Google SketchUp<br>
>>
8/Plugins/Trnsys3d/sketchup/Sketchup.rb:326:in
`polygon'<br>
>> C:/Program
Files/Google/Google SketchUp<br>
>>
8/Plugins/Trnsys3d/lib/interfaces/DrawingUtils.rb:27:in<br>
>> `detect_base_face'<br>
>> C:/Program
Files/Google/Google SketchUp<br>
>>
8/Plugins/Trnsys3d/lib/interfaces/DrawingUtils.rb:20:in
`each'<br>
>> C:/Program
Files/Google/Google SketchUp<br>
>>
8/Plugins/Trnsys3d/lib/interfaces/DrawingUtils.rb:20:in<br>
>> `detect_base_face'<br>
>> C:/Program
Files/Google/Google SketchUp<br>
>>
8/Plugins/Trnsys3d/lib/interfaces/BaseSurface.rb:254:in
`face_polygon'<br>
>> C:/Program
Files/Google/Google SketchUp<br>
>>
8/Plugins/Trnsys3d/lib/interfaces/BaseSurface.rb:253:in
`each'<br>
>> C:/Program
Files/Google/Google SketchUp<br>
>>
8/Plugins/Trnsys3d/lib/interfaces/BaseSurface.rb:253:in
`face_polygon'<br>
>> C:/Program
Files/Google/Google SketchUp<br>
>>
8/Plugins/Trnsys3d/lib/interfaces/Surface.rb:107:in<br>
>>
`update_input_object'<br>
>> C:/Program
Files/Google/Google SketchUp<br>
>>
8/Plugins/Trnsys3d/lib/interfaces/BaseSurface.rb:94:in<br>
>>
`update_input_object'<br>
>> C:/Program
Files/Google/Google SketchUp<br>
>>
8/Plugins/Trnsys3d/lib/interfaces/DrawingInterface.rb:353:in<br>
>> `on_change_entity'<br>
>> C:/Program
Files/Google/Google SketchUp<br>
>>
8/Plugins/Trnsys3d/lib/observers/FaceObserver.rb:32:in
`onChangeEntity'<br>
>> C:/Program
Files/Google/Google SketchUp<br>
>>
8/Plugins/Trnsys3d/lib/AsynchProc.rb:17:in
`initialize'<br>
>><br>
>> <-----End of the
error-----><br>
>><br>
>> When I pull it up
manual, I don't have any
problem, just when I write<br>
>> the number.<br>
>><br>
>> Thanks in advance
for your help,<br>
>> Julia.<br>
>>
________________________________________<br>
>> From: <a
moz-do-not-send="true"
href="mailto:trnsys-users-request@cae.wisc.edu"
target="_blank">trnsys-users-request@cae.wisc.edu</a><br>
>> [<a
moz-do-not-send="true"
href="mailto:trnsys-users-request@cae.wisc.edu"
target="_blank">trnsys-users-request@cae.wisc.edu</a>]<br>
>> Sent: Wednesday,
November 03, 2010 1:04 AM<br>
>> To: <a
moz-do-not-send="true"
href="mailto:trnsys-users@cae.wisc.edu"
target="_blank">trnsys-users@cae.wisc.edu</a><br>
>> Subject:
TRNSYS-users Digest, Vol 71,
Issue 4<br>
>><br>
>> Send TRNSYS-users
mailing list submissions to<br>
>> <a
moz-do-not-send="true"
href="mailto:trnsys-users@cae.wisc.edu"
target="_blank">trnsys-users@cae.wisc.edu</a><br>
>><br>
>> To subscribe or
unsubscribe via the World
Wide Web, visit<br>
>> <a
moz-do-not-send="true"
href="https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users"
target="_blank">https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users</a><br>
>> or, via email, send
a message with subject or
body 'help' to<br>
>> <a
moz-do-not-send="true"
href="mailto:trnsys-users-request@cae.wisc.edu"
target="_blank">trnsys-users-request@cae.wisc.edu</a><br>
>><br>
>> You can reach the
person managing the list at<br>
>> <a
moz-do-not-send="true"
href="mailto:trnsys-users-owner@cae.wisc.edu"
target="_blank">trnsys-users-owner@cae.wisc.edu</a><br>
>><br>
>> When replying,
please edit your Subject
line so it is more specific
than<br>
>> "Re: Contents of
TRNSYS-users digest..."<br>
>><br>
>>
_______________________________________________<br>
>> TRNSYS-users
mailing list<br>
>> <a
moz-do-not-send="true"
href="mailto:TRNSYS-users@cae.wisc.edu"
target="_blank">TRNSYS-users@cae.wisc.edu</a><br>
>> <a
moz-do-not-send="true"
href="https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users"
target="_blank">https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users</a><br>
>><br>
>><br>
>><br>
>><br>
>><br>
>><br>
>><br>
>> ---------- 已转发邮件
----------<br>
>> From: "Emiliano
Casati - 3ME" <<a
moz-do-not-send="true"
href="mailto:E.I.M.Casati@tudelft.nl"
target="_blank">E.I.M.Casati@tudelft.nl</a>><br>
>> To: <<a
moz-do-not-send="true"
href="mailto:trnsys-users@cae.wisc.edu"
target="_blank">trnsys-users@cae.wisc.edu</a>><br>
>> Date: Wed, 3 Nov
2010 13:19:58 +0100<br>
>> Subject:
[TRNSYS-users] input file<br>
>><br>
>> Hi to everybody!<br>
>><br>
>> I don’t understand
why, for certain projects, I
can’t open the input<br>
>> file,<br>
>> the message is “the
system cannot find the path
specified”.<br>
>><br>
>> Where should I find
the input file?<br>
>><br>
>><br>
>><br>
>> Thanks a lot<br>
>><br>
>><br>
>><br>
>> ec<br>
>><br>
>><br>
>> ---------- 已转发邮件
----------<br>
>> From: "Timothy
McDowell" <<a
moz-do-not-send="true"
href="mailto:mcdowell@tess-inc.com"
target="_blank">mcdowell@tess-inc.com</a>><br>
>> To: "Thibaut VITTE"
<<a
moz-do-not-send="true"
href="mailto:thibaut.vitte@h3c-energies.fr"
target="_blank">thibaut.vitte@h3c-energies.fr</a>>,<br>
>> <a
moz-do-not-send="true"
href="mailto:trnsys-users@cae.wisc.edu"
target="_blank">trnsys-users@cae.wisc.edu</a><br>
>> Date: Wed, 3 Nov
2010 07:23:05 -0500 (CDT)<br>
>> Subject: Re:
[TRNSYS-users] GenOpt
optimization: problem for
the<br>
>> secondgeneration
after 5 simulations<br>
>> This type of error
in GenOpt is usually caused
by an error in the TRNSYS<br>
>> simulation. You
need to check the *.lst file
for the TRNSYS run to see<br>
>> what the TRNSYS
error is.<br>
>><br>
>> Regards,<br>
>><br>
>> Tim<br>
>><br>
>><br>
>><br>
>><br>
>><br>
>>
----------------------------------<br>
>> Timothy McDowell<br>
>> Executive Vice
President<br>
>> Thermal Energy
System Specialists, LLC<br>
>> 22 N. Carroll St,
Suite 370<br>
>> Madison, WI 53703<br>
>> Phone: 608-274-2577<br>
>> Fax: 608-278-1475<br>
>><br>
>> ----- Original
Message -----<br>
>> From: "Thibaut
VITTE" <<a
moz-do-not-send="true"
href="mailto:thibaut.vitte@h3c-energies.fr"
target="_blank">thibaut.vitte@h3c-energies.fr</a>><br>
>> Sent: Wed, November
3, 2010 5:27<br>
>> Subject:Re:
[TRNSYS-users] GenOpt
optimization: problem for
the<br>
>> secondgeneration
after 5 simulations<br>
>><br>
>><br>
>><br>
>><br>
>><br>
>><br>
>><br>
>><br>
>><br>
>> Dear Alexis,<br>
>><br>
>> I've had a
similar error when I used
Genopt. I've had several<br>
>> components
tracked by a "trace" command
that made my list file<br>
>> enormous (more
than 100Mb) and genopt
could'nt handle that amount
of<br>
>> data.<br>
>><br>
>> Just my 2cents.<br>
>><br>
>> Thibaut<br>
>> --<br>
>><br>
>><br>
>> .bodyclass
@page { size: 8.5in 11in;
margin-top: 0.7874in;<br>
>> margin-bottom:<br>
>> 0.7874in;
margin-left: 0.7874in;
margin-right: 0.7874in }<br>
>> .bodyclass
table {
border-collapse:collapse;
border-spacing:0;<br>
>> empty-cells:show }<br>
>> .bodyclass td,
th { vertical-align:top;
font-size:12pt;}<br>
>> .bodyclass h1,
h2, h3, h4, h5, h6 {
clear:both }<br>
>> .bodyclass ol,
ul { margin:0; padding:0;}<br>
>> .bodyclass li
{ list-style: none;
margin:0; padding:0;}<br>
>> .bodyclass li
span.odfLiEnd { clear: both;
line-height:0; width:0;<br>
>> height:0; margin:0;
padding:0; }<br>
>> .bodyclass
span.footnodeNumber {
padding-right:1em; }<br>
>> .bodyclass * {
margin:0; }<br>
>> .bodyclass
.fr1 { font-size:12pt;
text-align:center;<br>
>> vertical-align:top;<br>
>> margin-left:0in;
margin-right:0in;
margin-top:0in;
margin-bottom:0in;<br>
>> padding:0in;
border-style:none; }<br>
>> .bodyclass .P1
{ font-size:12pt;
margin-bottom:0in;
margin-top:0in;<br>
>> font-family:Times
New Roman; text-align:center
! important; }<br>
>> .bodyclass
.P10 { font-size:7.5pt;
margin-bottom:0in;<br>
>> margin-top:0in;<br>
>> font-family:Tahoma,
sans-serif;
text-align:justify !
important;<br>
>> color:#f79646; }<br>
>> .bodyclass .P2
{ font-size:9pt;
margin-bottom:0in;
margin-top:0in;<br>
>> font-family:Tahoma,
sans-serif;
text-align:center !
important;<br>
>> color:#e36c0a;
font-style:italic;
font-weight:bold; }<br>
>> .bodyclass .P3
{ font-size:9pt;
margin-bottom:0in;
margin-top:0in;<br>
>> font-family:Tahoma,
sans-serif;
text-align:justify !
important;<br>
>> color:#e36c0a;
font-weight:bold; }<br>
>> .bodyclass .P4
{ font-size:9pt;
margin-bottom:0in;
margin-top:0in;<br>
>> font-family:Tahoma,
sans-serif;
text-align:justify !
important;<br>
>> color:#e36c0a;
font-weight:bold; }<br>
>> .bodyclass .P5
{ font-size:7.5pt;
margin-bottom:0in;<br>
>> margin-top:0in;<br>
>> font-family:Tahoma,
sans-serif; color:#e36c0a;
font-weight:bold; }<br>
>> .bodyclass .P6
{ font-size:7.5pt;
margin-bottom:0in;<br>
>> margin-top:0in;<br>
>> font-family:Tahoma,
sans-serif;
text-align:justify !
important;<br>
>> color:#3329b1; }<br>
>> .bodyclass
.P61 { font-size:8.5pt;
margin-bottom:0in;<br>
>> margin-top:0in;<br>
>> font-family:Tahoma,
sans-serif;
text-align:justify !
important;<br>
>> color:#3329b1; }<br>
>> .bodyclass .P7
{ font-size:7.5pt;
margin-bottom:0in;<br>
>> margin-top:0in;<br>
>> font-family:Tahoma,
sans-serif;
text-align:justify !
important;<br>
>> color:#3329b1;
font-style:italic; }<br>
>> .bodyclass .P8
{ font-size:7.5pt;
margin-bottom:0in;<br>
>> margin-top:0in;<br>
>> font-family:Tahoma,
sans-serif;
text-align:justify !
important;<br>
>> color:#3329b1;
font-style:italic; }<br>
>> .bodyclass .P9
{ font-size:12pt;
margin-bottom:0in;
margin-top:0in;<br>
>> font-family:Times
New Roman;
text-align:justify !
important; }<br>
>> .bodyclass
.P91 { font-size:12pt;
margin-bottom:0in;<br>
>> margin-top:0.05in;<br>
>> font-family:Times
New Roman;
text-align:justify !
important; }<br>
>> .bodyclass
.Standard { font-size:12pt;
font-family:Times New Roman;<br>
>> }<br>
>> .bodyclass .T1
{ color:#f79646; }<br>
>> .bodyclass .T2
{ color:#f79646;
font-family:Tahoma,
sans-serif;<br>
>> font-size:7.5pt; }<br>
>> .bodyclass .T3
{ color:#3329b1;
font-family:Tahoma,
sans-serif;<br>
>> font-size:7.5pt; }<br>
>> .bodyclass { }<br>
>><br>
>><br>
>><br>
>><br>
>><br>
>><br>
>><br>
>><br>
>><br>
>><br>
>> Le
futur maîtrisé<br>
>><br>
>><br>
>><br>
>><br>
>><br>
>><br>
>><br>
>>
Thibaut VITTE<br>
>>
Docteur - Ingénieur
Energies<br>
>> Mail :
<a moz-do-not-send="true"
href="mailto:thibaut.vitte@h3c-energies.fr"
target="_blank">thibaut.vitte@h3c-energies.fr</a><br>
>><br>
>>
-----------------------------<br>
>>
H3C-énergies<br>
>> 35,
chemin du vieux Chêne -
38240 MEYLAN<br>
>> Tél :
04 76 41 88 66 – Fax : 04 76
41 28<br>
>> 94<br>
>> <a
moz-do-not-send="true"
href="http://www.h3c-energies.fr/"
target="_blank">www.h3c-energies.fr</a><br>
>><br>
>><br>
>><br>
>><br>
>><br>
>><br>
>><br>
>><br>
>>
-----------------------------------------------------------------------------------<br>
>> Afin de
contribuer au respect de
l'environnement,<br>
>> merci de
n'imprimer ce message qu'en
cas de nécessité.<br>
>> In order to
respect the environment,
please don't<br>
>> print this
e-mail unless you really
need to.<br>
>><br>
>><br>
>><br>
>><br>
>><br>
>><br>
>>
_______________________________________________<br>
>> TRNSYS-users
mailing list<br>
>> <a
moz-do-not-send="true"
href="mailto:TRNSYS-users@cae.wisc.edu"
target="_blank">TRNSYS-users@cae.wisc.edu</a><br>
>> <a
moz-do-not-send="true"
href="https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users"
target="_blank">https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users</a><br>
>><br>
>><br>
>> ----- End of
original message -----<br>
>><br>
>><br>
>><br>
>>
_______________________________________________<br>
>> TRNSYS-users
mailing list<br>
>> <a
moz-do-not-send="true"
href="mailto:TRNSYS-users@cae.wisc.edu"
target="_blank">TRNSYS-users@cae.wisc.edu</a><br>
>> <a
moz-do-not-send="true"
href="https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users"
target="_blank">https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users</a><br>
>><br>
>><br>
><br>
>
_______________________________________________<br>
> TRNSYS-users mailing<br>
</div>
</div>
<br>
> <a moz-do-not-send="true"
href="mailto:listTRNSYS-users@cae.wisc.eduhttps://" target="_blank">listTRNSYS-users@cae.wisc.eduhttps://</a><a
moz-do-not-send="true"
href="http://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users"
target="_blank">www-old.cae.wisc.edu/mailman/listinfo/trnsys-users</a><br>
<div>><br>
><br>
> --<br>
>
***************************<br>
> David BRADLEY<br>
> Principal<br>
> Thermal Energy Systems
Specialists, LLC<br>
> 22 North Carroll Street -
suite 370<br>
> Madison, WI 53703 USA<br>
><br>
> P:+1.608.274.2577<br>
</div>
> <a moz-do-not-send="true"
href="mailto:F%3A%2B1.608.278.1475d.bradley@tess-inc.com"
target="_blank">F:+1.608.278.1475d.bradley@tess-inc.com</a><br>
<div>
<div>> <a
moz-do-not-send="true"
href="http://www.tess-inc.comhttp//"
target="_blank">http://www.tess-inc.comhttp://</a><a
moz-do-not-send="true"
href="http://www.trnsys.com/"
target="_blank">www.trnsys.com</a><br>
><br>
<br>
<br>
</div>
</div>
</div>
<br>
</blockquote>
<br>
</div>
</div>
<pre cols="72">--
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI 53703 USA
P:+1.608.274.2577
F:+1.608.278.1475
<div><a moz-do-not-send="true" href="mailto:d.bradley@tess-inc.com" target="_blank">d.bradley@tess-inc.com</a>
<a moz-do-not-send="true" href="http://www.tess-inc.com/" target="_blank">http://www.tess-inc.com</a>
<a moz-do-not-send="true" href="http://www.trnsys.com/" target="_blank">http://www.trnsys.com</a></div></pre>
</div>
</blockquote>
</div>
<br>
</div>
</div>
</blockquote>
</div>
<br>
</blockquote>
<br>
<pre cols="72">--
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI 53703 USA
P:+1.608.274.2577
F:+1.608.278.1475
<a moz-do-not-send="true" href="mailto:d.bradley@tess-inc.com" target="_blank">d.bradley@tess-inc.com</a>
<a moz-do-not-send="true" href="http://www.tess-inc.com/" target="_blank">http://www.tess-inc.com</a>
<a moz-do-not-send="true" href="http://www.trnsys.com/" target="_blank">http://www.trnsys.com</a></pre>
</div>
</div>
</div>
</blockquote>
</div>
<br>
</blockquote>
<br>
<pre class="moz-signature" cols="72">--
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI 53703 USA
P:+1.608.274.2577
F:+1.608.278.1475
<a class="moz-txt-link-abbreviated" href="mailto:d.bradley@tess-inc.com">d.bradley@tess-inc.com</a>
<a class="moz-txt-link-freetext" href="http://www.tess-inc.com">http://www.tess-inc.com</a>
<a class="moz-txt-link-freetext" href="http://www.trnsys.com">http://www.trnsys.com</a></pre>
</body>
</html>