Dear All,<br><br>Please have a look at a message below posted on behalf of an MSc student at the Welsh School of Architecture. Thank you in advance for any replies. <br><br>Regards<br><br><br>Dr Eleni Ampatzi BArch MA MSc PhD<br>
Low Carbon Research Institute<br>Welsh School of Architecture<br>Cardiff University<br><br>Bute Building<br>King Edward VII Avenue<br>Cardiff CF10 3NB<br>Wales U.K. <br><br>Tel: 029 20 875973<br>Fax: 029 20 874623<br>Email: <a href="mailto:AmpatziE@cf.ac.uk">AmpatziE@cf.ac.uk</a><br>
<br><a href="http://www.cardiff.ac.uk/archi/ampatzi.php">http://www.cardiff.ac.uk/archi/ampatzi.php</a><br><a href="http://www.lcri.org.uk/">http://www.lcri.org.uk/</a><br><br>--------------------------------------------------------------------------------------------------------------------------------------------------------------<br>
<br>I am an MSc student in Cardiff University and I am now starting my 
dissertation on the use of water in the envelope of a building, in order to 
regulate heat flows. I am new to TRNSYS and I would like to know if the 
following is possible and to get some direction/guidance regarding these 
areas:<br><br><font face="Default Sans Serif,Verdana,Arial,Helvetica,sans-serif" size="2">1) Can water as a 
construction material on the enveope of a building be modelled in TRNSYS?<br>2) 
Can water flows (due to natural, or forced circulation, or from solar heating) 
inside pipes embedded on the fabric of a building be modelled?<br>3) In the case 
i can simulate a natural flow or circulation of water in a chamber, then at 
which moments? under which circumstances? I reckon that even with a stable 
incident solar radiation, the temperature of the water will be different after 
10 minutes, 30 minutes 1 hour, or 12 hours. Can i calculate or simulate this 
interaction of the incident solar radiation on the water chamber and its effect 
on the natural flow of the it?<br>4) Considering a pipework or a network of 
chambers that contain water and supposing that some of them are exposed to solar 
radiation whereas others are in shade, provided that there is a natural flow of 
water caused by the differentiation in temperature, could i simulate somehow the 
heat distribution in the fluid? could the constant differentiation in 
temperature and flow of the water in this network be somehow calculated?<br>5) 
In the above case could i have different time "snapshots" of the system? To get 
an idea how this mechanism behaves?<br>6) In the case that these water 
chambers-containers form an enclosure, would i be able to simulate the 
conditions in this enclosure caused by the presence and flow of water around 
it?</font><font face="Default Sans Serif,Verdana,Arial,Helvetica,sans-serif" size="2"><font color="#888888"><br></font></font><br><br>