<div dir="ltr">Thank you, thank you very much.<br>I'm preparing my memoiry of master
i'm special in mechanic engeneering of thermal power, my memoiry is
about ISCC integrated solai combine cycle systeme, if you have in
exemple projet in transys about this send it please to study it<br><br><div class="gmail_quote">2011/5/8 <span dir="ltr"><<a href="mailto:trnsys-users-request@cae.wisc.edu">trnsys-users-request@cae.wisc.edu</a>></span><br>
<blockquote class="gmail_quote" style="margin: 0pt 0pt 0pt 0.8ex; border-left: 1px solid rgb(204, 204, 204); padding-left: 1ex;">Send TRNSYS-users mailing list submissions to<br>
<a href="mailto:trnsys-users@cae.wisc.edu">trnsys-users@cae.wisc.edu</a><br>
<br>
To subscribe or unsubscribe via the World Wide Web, visit<br>
<a href="https://mailman.cae.wisc.edu/listinfo/trnsys-users" target="_blank">https://mailman.cae.wisc.edu/listinfo/trnsys-users</a><br>
or, via email, send a message with subject or body 'help' to<br>
<a href="mailto:trnsys-users-request@cae.wisc.edu">trnsys-users-request@cae.wisc.edu</a><br>
<br>
You can reach the person managing the list at<br>
<a href="mailto:trnsys-users-owner@cae.wisc.edu">trnsys-users-owner@cae.wisc.edu</a><br>
<br>
When replying, please edit your Subject line so it is more specific<br>
than "Re: Contents of TRNSYS-users digest..."<br>
<br>Today's Topics:<br>
<br>
1. Re: TRNSYS-users Digest, Vol 76, Issue 38 (WALID KADRI)<br>
2. Re: TRNSYS-users Digest, Vol 76, Issue 36 (WALID KADRI)<br>
<br><br>---------- Message transféré ----------<br>From: WALID KADRI <<a href="mailto:walidenergetique@gmail.com">walidenergetique@gmail.com</a>><br>To: <a href="mailto:trnsys-users@cae.wisc.edu">trnsys-users@cae.wisc.edu</a><br>
Date: Sat, 7 May 2011 23:58:39 +0200<br>Subject: Re: [TRNSYS-users] TRNSYS-users Digest, Vol 76, Issue 38<br><div dir="ltr">Thank you, thank you very much.<br>I'm preparing my memoiry of master i'm special in mechanic engeneering of thermal power, my memoiry is about ISCC integrated solai combine cycle systeme, if you have in exemple projet in transys about this send it please to study it.<br>
<br><div class="gmail_quote">2011/4/11 <span dir="ltr"><<a href="mailto:trnsys-users-request@cae.wisc.edu" target="_blank">trnsys-users-request@cae.wisc.edu</a>></span><br><blockquote class="gmail_quote" style="margin: 0pt 0pt 0pt 0.8ex; border-left: 1px solid rgb(204, 204, 204); padding-left: 1ex;">
Send TRNSYS-users mailing list submissions to<br>
<a href="mailto:trnsys-users@cae.wisc.edu" target="_blank">trnsys-users@cae.wisc.edu</a><br>
<br>
To subscribe or unsubscribe via the World Wide Web, visit<br>
<a href="https://mailman.cae.wisc.edu/listinfo/trnsys-users" target="_blank">https://mailman.cae.wisc.edu/listinfo/trnsys-users</a><br>
or, via email, send a message with subject or body 'help' to<br>
<a href="mailto:trnsys-users-request@cae.wisc.edu" target="_blank">trnsys-users-request@cae.wisc.edu</a><br>
<br>
You can reach the person managing the list at<br>
<a href="mailto:trnsys-users-owner@cae.wisc.edu" target="_blank">trnsys-users-owner@cae.wisc.edu</a><br>
<br>
When replying, please edit your Subject line so it is more specific<br>
than "Re: Contents of TRNSYS-users digest..."<br>
<br>Today's Topics:<br>
<br>
1. Re: time delay by means of type 93 (input value recall)<br>
(Matt Duffy)<br>
<br><br>---------- Message transféré ----------<br>From: "Matt Duffy" <<a href="mailto:duffy@tess-inc.com" target="_blank">duffy@tess-inc.com</a>><br>To: "Stefan Wachter" <<a href="mailto:wachter@mail.hs-ulm.de" target="_blank">wachter@mail.hs-ulm.de</a>>, <a href="mailto:trnsys-users@cae.wisc.edu" target="_blank">trnsys-users@cae.wisc.edu</a><br>
Date: Mon, 11 Apr 2011 15:35:35 -0500 (CDT)<br>Subject: Re: [TRNSYS-users] time delay by means of type 93 (input value recall)<br><br>
Hello Stefan,<br>
<br>
As long as you implement the timestep as a fraction in an EQUATIONS in the control cards, you should be ok. For example,<br>
<br>
EQUATIONS 1<br>
TIMESTEP=2/60 !Timestep of 2 mins<br>
<br>
Please see the attached for reference.<br>
<br>
<br>
Best regards, <br>
<br>
Matt Duffy <br>
<br>
<br>
<div style="background-repeat: repeat-x;"><b>----- Original Message -----</b><br>
<b>From:</b> "Stefan Wachter" <<a href="mailto:wachter@mail.hs-ulm.de" target="_blank">wachter@mail.hs-ulm.de</a>> <br>
<b>Sent:</b> Fri, April 8, 2011 4:05<br>
<b>Subject:</b> [TRNSYS-users] time delay by means of type 93 (input value recall)<br>
<br>
<table width="100%" cellspacing="5">
<tbody>
<tr>
<td>
<div>
<div>
<div style="font-family: Tahoma; direction: ltr; color: rgb(0, 0, 0); font-size: 13px;">
<div dir="ltr">Hello everybody,</div>
<div dir="ltr"> </div>
<div dir="ltr"><font face="tahoma" size="2">I am new at trnsys-users.</font></div>
<div dir="ltr"><font face="tahoma" size="2">Currently I`m modeling an already existing solar heating system (for hot water).</font></div>
<div dir="ltr"><font face="tahoma" size="2">In this system the loading pump is activated by a time delay of 4 minutes (after solar pump is launched).</font></div>
<div dir="ltr"><font face="tahoma" size="2">I tried to model this as follows:</font></div>
<div dir="ltr"> </div>
<div dir="ltr"><font face="tahoma" size="2">- simulation time step: 2 minutes</font></div>
<div dir="ltr"><font face="tahoma" size="2">- storage of the control signal of the solar pump over the last two time steps by means of type 93 (input value recall)</font></div>
<div dir="ltr"><font face="tahoma" size="2">- if the control signal of the solar pump is "1" in the stored two time steps, then the loading pump is launched.</font></div>
<div dir="ltr"> </div>
<div dir="ltr"><font face="tahoma" size="2">It works (tried by a simple example deck) but does it also works</font> in context with a quite big deck (120 m² apertur area, 2 continuous controllers)?</div>
<div dir="ltr"><font face="tahoma" size="2">I`m concerned about that the small time step of 2 minutes could cause problems (for example oscillations of the controllers).</font></div>
<div dir="ltr"><font face="tahoma" size="2">Could this work or have someone of you another idea how i can solve this problem?</font></div>
<div dir="ltr"> </div>
<div dir="ltr"><font face="tahoma" size="2">Thanks a lot.</font></div>
<div dir="ltr"><font face="tahoma" size="2">Best regards.</font></div>
<div dir="ltr"> </div>
<div dir="ltr"><font face="tahoma" size="2">Stefan Wachter</font> </div>
<div dir="ltr"> </div>
<div dir="ltr"> </div>
<div dir="ltr"> </div>
</div>
</div>
<hr noshade size="1">
<pre>_______________________________________________
TRNSYS-users mailing list
<a>TRNSYS-users@cae.wisc.edu</a>
<a href="https://mailman.cae.wisc.edu/listinfo/trnsys-users" target="_blank">https://mailman.cae.wisc.edu/listinfo/trnsys-users</a>
</pre>
</div>
</td>
</tr>
</tbody>
</table>
</div><br>_______________________________________________<br>
TRNSYS-users mailing list<br>
<a href="mailto:TRNSYS-users@cae.wisc.edu" target="_blank">TRNSYS-users@cae.wisc.edu</a><br>
<a href="https://mailman.cae.wisc.edu/listinfo/trnsys-users" target="_blank">https://mailman.cae.wisc.edu/listinfo/trnsys-users</a><br>
<br></blockquote></div><br></div>
<br><br>---------- Message transféré ----------<br>From: WALID KADRI <<a href="mailto:walidenergetique@gmail.com">walidenergetique@gmail.com</a>><br>To: <a href="mailto:trnsys-users@cae.wisc.edu">trnsys-users@cae.wisc.edu</a><br>
Date: Sun, 8 May 2011 00:01:11 +0200<br>Subject: Re: [TRNSYS-users] TRNSYS-users Digest, Vol 76, Issue 36<br><div dir="ltr">Thank you, thank you very much.<br>I'm preparing my memoiry of master
i'm special in mechanic engeneering of thermal power, my memoiry is
about ISCC integrated solai combine cycle systeme, if you have in
exemple projet in transys about this send it please to study it<br><br><div class="gmail_quote">2011/4/11 <span dir="ltr"><<a href="mailto:trnsys-users-request@cae.wisc.edu" target="_blank">trnsys-users-request@cae.wisc.edu</a>></span><br>
<blockquote class="gmail_quote" style="margin: 0pt 0pt 0pt 0.8ex; border-left: 1px solid rgb(204, 204, 204); padding-left: 1ex;">Send TRNSYS-users mailing list submissions to<br>
<a href="mailto:trnsys-users@cae.wisc.edu" target="_blank">trnsys-users@cae.wisc.edu</a><br>
<br>
To subscribe or unsubscribe via the World Wide Web, visit<br>
<a href="https://mailman.cae.wisc.edu/listinfo/trnsys-users" target="_blank">https://mailman.cae.wisc.edu/listinfo/trnsys-users</a><br>
or, via email, send a message with subject or body 'help' to<br>
<a href="mailto:trnsys-users-request@cae.wisc.edu" target="_blank">trnsys-users-request@cae.wisc.edu</a><br>
<br>
You can reach the person managing the list at<br>
<a href="mailto:trnsys-users-owner@cae.wisc.edu" target="_blank">trnsys-users-owner@cae.wisc.edu</a><br>
<br>
When replying, please edit your Subject line so it is more specific<br>
than "Re: Contents of TRNSYS-users digest..."<br>
<br>Today's Topics:<br>
<br>
1. NTYPE 906: Energy balance for surfaces (??)<br>
<br><br>---------- Message transféré ----------<br>From: 王洋 <<a href="mailto:wanghongyang1767@gmail.com" target="_blank">wanghongyang1767@gmail.com</a>><br>To: <a href="mailto:trnsys-users@cae.wisc.edu" target="_blank">trnsys-users@cae.wisc.edu</a><br>
Date: Mon, 11 Apr 2011 17:07:35 +0200<br>Subject: [TRNSYS-users] NTYPE 906: Energy balance for surfaces<br>Dear all,<br><br> I have some questions about NTYPE 906: Energy balance for surfaces:<br><br> 1. Please see the ATTACHED.<br>
<br>
Based on the Manual, B6_BAL should be always 0, but here i think its
calculation is wrong. B6_BAL isn't -8.180E-13, it should be 2.683E-03,
so it's not 0, PLEASE tell me some possible reasons about it. <br>
1_B6_BAL = - 1_B6_DQWALLdt- 1_B6_QCOMI+ 1_B6_QCOMO+ 1_B6_QRADGI+ 1_B6_QRADGO- 1_B6_QALG <br><br> -8.180E-13 -3.838E+03 2.683E-03 -3.838E+03 0.000E+00 0.000E+00 0.000E+00<br>
2. B6_DQWALLdt in Manual is change of internal energy of surface, but
it's a little abstract. Here I only used the heatings in TRNBUILD, no
other internal gains. PLEASE give me some examples about change of
internal energy of surface. Is it energy Generation of Wall etc.? Why
here is minus (-3.838E+03)? What's difference between B6_DQWALLdt and
B6_QCOMO? Why here they are the same? Is there some reasons?<br>
<br>3. I think B6_QCOMI is some heat flux enter into inside of wall such
as the heat from the heatings of indoor and the solar radiation, Is it
right? B6_QCOMO is heat loss from the wall outside, Is it right? If
wrong, PLEASE tell me what are their meaning.<br>
<br>Thanks!<br><br>br.<br><br>wang<br><br><br><div class="gmail_quote">---------- Forwarded message ----------<br>From: <b class="gmail_sendername">王洋</b> <span dir="ltr"><<a href="mailto:wanghongyang1767@gmail.com" target="_blank">wanghongyang1767@gmail.com</a>></span><br>
Date: 2011/3/8<br>Subject: NTYPE 906: Energy balance for surfaces<br>To: <a href="mailto:trnsys-users@cae.wisc.edu" target="_blank">trnsys-users@cae.wisc.edu</a><br><br><br><div>Dear all,<br><br> I have some questions about NTYPE 906: Energy balance for surfaces:<br>
<br> 1. Please see the ATTACHED.<br> <br>
Based on the Manual, B6_BAL should be always 0, but here i think its
calculation is wrong. B6_BAL isn't -8.180E-13, it should be 2.683E-03,
so it's not 0, PLEASE tell me some possible reasons about it. <br>
1_B6_BAL = - 1_B6_DQWALLdt- 1_B6_QCOMI+ 1_B6_QCOMO+ 1_B6_QRADGI+ 1_B6_QRADGO- 1_B6_QALG <br><br> -8.180E-13 -3.838E+03 2.683E-03 -3.838E+03 0.000E+00 0.000E+00 0.000E+00<br>
2. B6_DQWALLdt in Manual is change of internal energy of surface, but
it's a little abstract. Here I only used the heatings in TRNBUILD, no
other internal gains. PLEASE give me some examples about change of
internal energy of surface. Is it energy Generation of Wall etc.? Why
here is minus (-3.838E+03)? What's difference between B6_DQWALLdt and
B6_QCOMO? Why here they are the same? Is there some reasons?<br>
<br>3. I think B6_QCOMI is some heat flux enter into inside of wall such
as the heat from the heatings of indoor and the solar radiation, Is it
right? B6_QCOMO is heat loss from the wall outside, Is it right? If
wrong, PLEASE tell me what are their meaning.<br>
<br>Thanks!<br><br>br.<br><br>wang<br><br><br><br><br></div><div><div></div><div><div class="gmail_quote">2011/3/7 王洋 <span dir="ltr"><<a href="mailto:wanghongyang1767@gmail.com" target="_blank">wanghongyang1767@gmail.com</a>></span><br>
<blockquote class="gmail_quote" style="margin: 0pt 0pt 0pt 0.8ex; border-left: 1px solid rgb(204, 204, 204); padding-left: 1ex;">
<br><br><br><div class="gmail_quote">2011/3/7 <span dir="ltr"><<a href="mailto:trnsys-users-request@cae.wisc.edu" target="_blank">trnsys-users-request@cae.wisc.edu</a>></span><br><blockquote class="gmail_quote" style="margin: 0pt 0pt 0pt 0.8ex; border-left: 1px solid rgb(204, 204, 204); padding-left: 1ex;">
Send TRNSYS-users mailing list submissions to<br>
<a href="mailto:trnsys-users@cae.wisc.edu" target="_blank">trnsys-users@cae.wisc.edu</a><br>
<br>
To subscribe or unsubscribe via the World Wide Web, visit<br>
<a href="https://mailman.cae.wisc.edu/listinfo/trnsys-users" target="_blank">https://mailman.cae.wisc.edu/listinfo/trnsys-users</a><br>
or, via email, send a message with subject or body 'help' to<br>
<a href="mailto:trnsys-users-request@cae.wisc.edu" target="_blank">trnsys-users-request@cae.wisc.edu</a><br>
<br>
You can reach the person managing the list at<br>
<a href="mailto:trnsys-users-owner@cae.wisc.edu" target="_blank">trnsys-users-owner@cae.wisc.edu</a><br>
<br>
When replying, please edit your Subject line so it is more specific<br>
than "Re: Contents of TRNSYS-users digest..."<br>
<br>Today's Topics:<br>
<br>
1. Re: Strange error (hotline)<br>
2. Questions...please reply (Juv?ncio Correia Tavares)<br>
<br><br>---------- 已转发邮件 ----------<br>From: "hotline" <<a href="mailto:hotline@transsolar.com" target="_blank">hotline@transsolar.com</a>><br>To: rraye001 <<a href="mailto:rraye001@fiu.edu" target="_blank">rraye001@fiu.edu</a>><br>
Date: Mon, 7 Mar 2011 13:33:34 +0100<br>Subject: Re: [TRNSYS-users] Strange error<br>
<div>
<div dir="ltr" align="left"><span><font face="Arial" size="2">Hi,</font></span>
</div>
<div dir="ltr" align="left"><span><font face="Arial" size="2"></font></span>
</div>
<div dir="ltr" align="left"><span><font face="Arial" size="2">seems like you hit a limit for the generation of the transfer
function coefficients.</font></span>
</div>
<div dir="ltr" align="left"><span><font face="Arial" size="2">Please check if the roof is defined correctly.</font></span>
</div>
<div dir="ltr" align="left"><font face="Arial" size="2"></font>
</div>
<div><span style="font-family: Arial; font-size: 10pt;"><span style="font-family: Arial; font-size: 10pt;"><span>Regards</span></span></span>
</div>
<div><span style="font-family: Arial; font-size: 10pt;"><span style="font-family: Arial; font-size: 10pt;"><span></span></span><span style="font-family: Arial; font-size: 10pt;">Christian</span></span>
</div>
<div><span style="font-family: Arial; font-size: 10pt;"><span style="font-family: Arial; font-size: 10pt;"></span>
</span></div>
<div>
<p style="margin: 0cm 0cm 0pt;" class="MsoNormal">
<span style="font-family: Arial; font-size: 10pt;">TRANSSOLAR Software Team</span>
</p>
<p style="margin: 0cm 0cm 0pt;" class="MsoNormal"><a href="mailto:hotline@transsolar.com" target="_blank">hotline@transsolar.com</a>
</p>
<p style="margin: 0cm 0cm 0pt;" class="MsoNormal">
</p>
<p class="MsoNormal" align="left"><a href="http://www.trnsys.de/" target="_blank">www.trnsys.de</a>
</p>
<p class="MsoNormal" align="left"><span style="font-family: Arial; font-size: 10pt;">Transsolar KlimaEngineering -
Technologien für energieeffizientes Bauen und Nutzerkomfort in
Gebäuden</span><span style="font-family: Arial; font-size: 7.5pt;">
</span>
</p>
<p style="margin: 0cm 0cm 0pt;" class="MsoNormal"><span style="font-family: Arial; font-size: 10pt;">Transsolar Energietechnik GmbH,
Curiestrasse 2, 70563 Stuttgart / Amtsgericht Stuttgart - HRB 23347 / UsSt.-Id:
DE152272639</span><span style="font-family: Arial; font-size: 7.5pt;"></span>
</p>
<p style="margin: 0cm 0cm 0pt;" class="MsoNormal"><span style="font-family: Arial; font-size: 10pt;">Geschäftsführer: Dipl.Ing. Matthias
Schuler, Dipl.Ing. Thomas Auer, Dipl.Phys. Stefan Holst, Prof. Volkmar Bleicher</span><span style="font-family: 'Courier New'; color: navy; font-size: 10pt;"></span>
</p>
<p class="MsoNormal" align="left"><font face="Arial" size="2"></font></p></div>
<div>
</div><br>
<div dir="ltr" align="left" lang="de">
<hr>
<font face="Tahoma" size="2"><b>Von:</b> Rambod Rayegan [mailto:<a href="mailto:rraye001@fiu.edu" target="_blank">rraye001@fiu.edu</a>]
<br>
<b>Gesendet:</b> Samstag, 5. März 2011 06:08<br>
<b>An:</b>
<a href="mailto:trnsys-users@cae.wisc.edu" target="_blank">trnsys-users@cae.wisc.edu</a><br>
<b>Betreff:</b> [TRNSYS-users] Strange
error<br>
</font><br>
</div>
<div></div>
<div>
<p>
Dear TRNSYS users:
</p></div>
<div>
</div>
<div>I am working on a model created buy TRNSYS 3d plugin in google sketchup for
couple of months. Everyday I add something to it or modify some parameters
in it. Today, I have just changed the roof type in the building type 56 and
tried to run it again but I have received the following error:
</div>
<div>
</div>
<div>
</div>
<div><font color="#3333ff">Visual Fortran run-time error</font>
</div>
<div><font color="#3333ff"></font>
</div>
<div><font color="#3333ff">fortrtl:severe(64):input conversion error, unit 56,
file C:\.....building.trn </font>
</div>
<div><font color="#3333ff">Image PC Routine Source DFORRT.DLL 02014C49
Unknown Unknown Unknown</font>
</div>
<div>
</div>
<div>
</div>
<div>Anybody has an idea to solve the issue?
</div>
<div>
</div>
<div>Thank you.
</div>
<div><br>
Rambod Rayegan<br>
Ph.D Candidate<br>
Mechanical Engineering
Department<br>
Florida International University<br>
10555 W Flagler St,
EC3620<br>
Miami, FL, 33174<br>
<br>
305-348-3558
(Office)<br>
786-218-7375(Cell)<br>
305-348-1932 (Fax)<br>
</div>
<p>
</p></div><br><br>---------- 已转发邮件 ----------<br>From: "Juvêncio Correia Tavares" <<a href="mailto:juvenciotavares@hotmail.com" target="_blank">juvenciotavares@hotmail.com</a>><br>To: <<a href="mailto:trnsys-users@engr.wisc.edu" target="_blank">trnsys-users@engr.wisc.edu</a>><br>
Date: Fri, 4 Mar 2011 15:16:10 +0000<br>Subject: [TRNSYS-users] Questions...please reply<br>
<div>
<span style="font-family: arial,sans-serif; font-size: 16px;"><span title="Clique para obter traduções alternativas"><div><span style="font-family: arial,sans-serif; font-size: 16px;"><span title="Clique para obter traduções alternativas"><br>
</span></span></div>I`m</span> <span title="Clique para obter traduções alternativas">doing a</span> <span title="Clique para obter traduções alternativas">dynamic simulation</span> <span title="Clique para obter traduções alternativas">of buildings</span> <span title="Clique para obter traduções alternativas">in</span> <span title="Clique para obter traduções alternativas">TRNSYS</span><span title="Clique para obter traduções alternativas">, during</span> <span title="Clique para obter traduções alternativas">the</span> <span title="Clique para obter traduções alternativas">simulation</span> <span title="Clique para obter traduções alternativas">gave the following error</span> <span title="Clique para obter traduções alternativas">...</span> <span title="Clique para obter traduções alternativas">as you can see</span> <span title="Clique para obter traduções alternativas">in</span> <span title="Clique para obter traduções alternativas">the picture.</span></span><div>
<span title="Clique para obter traduções alternativas"></span><font face="arial, sans-serif"><br></font><div style="font-family: Tahoma; font-size: 10pt;"><span style="font-family: arial,sans-serif; font-size: 16px;"><span title="Clique para obter traduções alternativas">And</span> <span title="Clique para obter traduções alternativas">also</span><span title="Clique para obter traduções alternativas">,</span> <span title="Clique para obter traduções alternativas">I would like</span> <span title="Clique para obter traduções alternativas">to send me</span> <span title="Clique para obter traduções alternativas">a</span> <span title="Clique para obter traduções alternativas">PDF</span> <span title="Clique para obter traduções alternativas">about</span> <span title="Clique para obter traduções alternativas">connection</span><span title="Clique para obter traduções alternativas">.</span><br>
<br><span title="Clique para obter traduções alternativas">I await your</span> <span title="Clique para obter traduções alternativas">response</span><span title="Clique para obter traduções alternativas">.</span><br><br>
<span title="Clique para obter traduções alternativas">thanks.</span></span></div>
</div> </div>
<br>_______________________________________________<br>
TRNSYS-users mailing list<br>
<a href="mailto:TRNSYS-users@cae.wisc.edu" target="_blank">TRNSYS-users@cae.wisc.edu</a><br>
<a href="https://mailman.cae.wisc.edu/listinfo/trnsys-users" target="_blank">https://mailman.cae.wisc.edu/listinfo/trnsys-users</a><br>
<br></blockquote></div><br>
</blockquote></div><br>
</div></div></div><br>
<br>_______________________________________________<br>
TRNSYS-users mailing list<br>
<a href="mailto:TRNSYS-users@cae.wisc.edu" target="_blank">TRNSYS-users@cae.wisc.edu</a><br>
<a href="https://mailman.cae.wisc.edu/listinfo/trnsys-users" target="_blank">https://mailman.cae.wisc.edu/listinfo/trnsys-users</a><br>
<br></blockquote></div><br></div>
<br>_______________________________________________<br>
TRNSYS-users mailing list<br>
<a href="mailto:TRNSYS-users@cae.wisc.edu">TRNSYS-users@cae.wisc.edu</a><br>
<a href="https://mailman.cae.wisc.edu/listinfo/trnsys-users" target="_blank">https://mailman.cae.wisc.edu/listinfo/trnsys-users</a><br>
<br></blockquote></div><br></div>