Dear all,<br><br> I have some questions about NTYPE 906: Energy balance for surfaces:<br><br> 1. Please see the ATTACHED.<br> <br>
Based on the Manual, B6_BAL should be always 0, but here i think its
calculation is wrong. B6_BAL isn't -8.180E-13, it should be 2.683E-03,
so it's not 0, PLEASE tell me some possible reasons about it. <br>
1_B6_BAL = - 1_B6_DQWALLdt- 1_B6_QCOMI+ 1_B6_QCOMO+ 1_B6_QRADGI+ 1_B6_QRADGO- 1_B6_QALG <br><br> -8.180E-13 -3.838E+03 2.683E-03 -3.838E+03 0.000E+00 0.000E+00 0.000E+00<br>
2. B6_DQWALLdt in Manual is change of internal energy of surface, but
it's a little abstract. Here I only used the heatings in TRNBUILD, no
other internal gains. PLEASE give me some examples about change of
internal energy of surface. Is it energy Generation of Wall etc.? Why
here is minus (-3.838E+03)? What's difference between B6_DQWALLdt and
B6_QCOMO? Why here they are the same? Is there some reasons?<br>
<br>3. I think B6_QCOMI is some heat flux enter into inside of wall such
as the heat from the heatings of indoor and the solar radiation, Is it
right? B6_QCOMO is heat loss from the wall outside, Is it right? If
wrong, PLEASE tell me what are their meaning.<br>
<br>Thanks!<br><br>br.<br><br>wang<br><br><br><div class="gmail_quote">---------- Forwarded message ----------<br>From: <b class="gmail_sendername">王洋</b> <span dir="ltr"><<a href="mailto:wanghongyang1767@gmail.com">wanghongyang1767@gmail.com</a>></span><br>
Date: 2011/3/8<br>Subject: NTYPE 906: Energy balance for surfaces<br>To: <a href="mailto:trnsys-users@cae.wisc.edu">trnsys-users@cae.wisc.edu</a><br><br><br><div class="im">Dear all,<br><br> I have some questions about NTYPE 906: Energy balance for surfaces:<br>
<br> 1. Please see the ATTACHED.<br> <br>
Based on the Manual, B6_BAL should be always 0, but here i think its
calculation is wrong. B6_BAL isn't -8.180E-13, it should be 2.683E-03,
so it's not 0, PLEASE tell me some possible reasons about it. <br>
1_B6_BAL = - 1_B6_DQWALLdt- 1_B6_QCOMI+ 1_B6_QCOMO+ 1_B6_QRADGI+ 1_B6_QRADGO- 1_B6_QALG <br><br> -8.180E-13 -3.838E+03 2.683E-03 -3.838E+03 0.000E+00 0.000E+00 0.000E+00<br>
2. B6_DQWALLdt in Manual is change of internal energy of surface, but
it's a little abstract. Here I only used the heatings in TRNBUILD, no
other internal gains. PLEASE give me some examples about change of
internal energy of surface. Is it energy Generation of Wall etc.? Why
here is minus (-3.838E+03)? What's difference between B6_DQWALLdt and
B6_QCOMO? Why here they are the same? Is there some reasons?<br>
<br>3. I think B6_QCOMI is some heat flux enter into inside of wall such
as the heat from the heatings of indoor and the solar radiation, Is it
right? B6_QCOMO is heat loss from the wall outside, Is it right? If
wrong, PLEASE tell me what are their meaning.<br>
<br>Thanks!<br><br>br.<br><br>wang<br><br><br><br><br></div><div><div></div><div class="h5"><div class="gmail_quote">2011/3/7 王洋 <span dir="ltr"><<a href="mailto:wanghongyang1767@gmail.com" target="_blank">wanghongyang1767@gmail.com</a>></span><br>
<blockquote class="gmail_quote" style="margin: 0pt 0pt 0pt 0.8ex; border-left: 1px solid rgb(204, 204, 204); padding-left: 1ex;">
<br><br><br><div class="gmail_quote">2011/3/7 <span dir="ltr"><<a href="mailto:trnsys-users-request@cae.wisc.edu" target="_blank">trnsys-users-request@cae.wisc.edu</a>></span><br><blockquote class="gmail_quote" style="margin: 0pt 0pt 0pt 0.8ex; border-left: 1px solid rgb(204, 204, 204); padding-left: 1ex;">
Send TRNSYS-users mailing list submissions to<br>
<a href="mailto:trnsys-users@cae.wisc.edu" target="_blank">trnsys-users@cae.wisc.edu</a><br>
<br>
To subscribe or unsubscribe via the World Wide Web, visit<br>
<a href="https://mailman.cae.wisc.edu/listinfo/trnsys-users" target="_blank">https://mailman.cae.wisc.edu/listinfo/trnsys-users</a><br>
or, via email, send a message with subject or body 'help' to<br>
<a href="mailto:trnsys-users-request@cae.wisc.edu" target="_blank">trnsys-users-request@cae.wisc.edu</a><br>
<br>
You can reach the person managing the list at<br>
<a href="mailto:trnsys-users-owner@cae.wisc.edu" target="_blank">trnsys-users-owner@cae.wisc.edu</a><br>
<br>
When replying, please edit your Subject line so it is more specific<br>
than "Re: Contents of TRNSYS-users digest..."<br>
<br>Today's Topics:<br>
<br>
1. Re: Strange error (hotline)<br>
2. Questions...please reply (Juv?ncio Correia Tavares)<br>
<br><br>---------- 已转发邮件 ----------<br>From: "hotline" <<a href="mailto:hotline@transsolar.com" target="_blank">hotline@transsolar.com</a>><br>To: rraye001 <<a href="mailto:rraye001@fiu.edu" target="_blank">rraye001@fiu.edu</a>><br>
Date: Mon, 7 Mar 2011 13:33:34 +0100<br>Subject: Re: [TRNSYS-users] Strange error<br>
<div>
<div dir="ltr" align="left"><span><font face="Arial" size="2">Hi,</font></span>
</div>
<div dir="ltr" align="left"><span><font face="Arial" size="2"></font></span>
</div>
<div dir="ltr" align="left"><span><font face="Arial" size="2">seems like you hit a limit for the generation of the transfer
function coefficients.</font></span>
</div>
<div dir="ltr" align="left"><span><font face="Arial" size="2">Please check if the roof is defined correctly.</font></span>
</div>
<div dir="ltr" align="left"><font face="Arial" size="2"></font>
</div>
<div><span style="font-family: Arial; font-size: 10pt;"><span style="font-family: Arial; font-size: 10pt;"><span>Regards</span></span></span>
</div>
<div><span style="font-family: Arial; font-size: 10pt;"><span style="font-family: Arial; font-size: 10pt;"><span></span></span><span style="font-family: Arial; font-size: 10pt;">Christian</span></span>
</div>
<div><span style="font-family: Arial; font-size: 10pt;"><span style="font-family: Arial; font-size: 10pt;"></span>
</span></div>
<div>
<p style="margin: 0cm 0cm 0pt;" class="MsoNormal">
<span style="font-family: Arial; font-size: 10pt;">TRANSSOLAR Software Team</span>
</p>
<p style="margin: 0cm 0cm 0pt;" class="MsoNormal"><a href="mailto:hotline@transsolar.com" target="_blank">hotline@transsolar.com</a>
</p>
<p style="margin: 0cm 0cm 0pt;" class="MsoNormal">
</p>
<p class="MsoNormal" align="left"><a href="http://www.trnsys.de/" target="_blank">www.trnsys.de</a>
</p>
<p class="MsoNormal" align="left"><span style="font-family: Arial; font-size: 10pt;">Transsolar KlimaEngineering -
Technologien für energieeffizientes Bauen und Nutzerkomfort in
Gebäuden</span><span style="font-family: Arial; font-size: 7.5pt;">
</span>
</p>
<p style="margin: 0cm 0cm 0pt;" class="MsoNormal"><span style="font-family: Arial; font-size: 10pt;">Transsolar Energietechnik GmbH,
Curiestrasse 2, 70563 Stuttgart / Amtsgericht Stuttgart - HRB 23347 / UsSt.-Id:
DE152272639</span><span style="font-family: Arial; font-size: 7.5pt;"></span>
</p>
<p style="margin: 0cm 0cm 0pt;" class="MsoNormal"><span style="font-family: Arial; font-size: 10pt;">Geschäftsführer: Dipl.Ing. Matthias
Schuler, Dipl.Ing. Thomas Auer, Dipl.Phys. Stefan Holst, Prof. Volkmar Bleicher</span><span style="font-family: 'Courier New'; color: navy; font-size: 10pt;"></span>
</p>
<p class="MsoNormal" align="left"><font face="Arial" size="2"></font></p></div>
<div>
</div><br>
<div dir="ltr" align="left" lang="de">
<hr>
<font face="Tahoma" size="2"><b>Von:</b> Rambod Rayegan [mailto:<a href="mailto:rraye001@fiu.edu" target="_blank">rraye001@fiu.edu</a>]
<br>
<b>Gesendet:</b> Samstag, 5. März 2011 06:08<br>
<b>An:</b>
<a href="mailto:trnsys-users@cae.wisc.edu" target="_blank">trnsys-users@cae.wisc.edu</a><br>
<b>Betreff:</b> [TRNSYS-users] Strange
error<br>
</font><br>
</div>
<div></div>
<div>
<p>
Dear TRNSYS users:
</p></div>
<div>
</div>
<div>I am working on a model created buy TRNSYS 3d plugin in google sketchup for
couple of months. Everyday I add something to it or modify some parameters
in it. Today, I have just changed the roof type in the building type 56 and
tried to run it again but I have received the following error:
</div>
<div>
</div>
<div>
</div>
<div><font color="#3333ff">Visual Fortran run-time error</font>
</div>
<div><font color="#3333ff"></font>
</div>
<div><font color="#3333ff">fortrtl:severe(64):input conversion error, unit 56,
file C:\.....building.trn </font>
</div>
<div><font color="#3333ff">Image PC Routine Source DFORRT.DLL 02014C49
Unknown Unknown Unknown</font>
</div>
<div>
</div>
<div>
</div>
<div>Anybody has an idea to solve the issue?
</div>
<div>
</div>
<div>Thank you.
</div>
<div><br>
Rambod Rayegan<br>
Ph.D Candidate<br>
Mechanical Engineering
Department<br>
Florida International University<br>
10555 W Flagler St,
EC3620<br>
Miami, FL, 33174<br>
<br>
305-348-3558
(Office)<br>
786-218-7375(Cell)<br>
305-348-1932 (Fax)<br>
</div>
<p>
</p></div><br><br>---------- 已转发邮件 ----------<br>From: "Juvêncio Correia Tavares" <<a href="mailto:juvenciotavares@hotmail.com" target="_blank">juvenciotavares@hotmail.com</a>><br>To: <<a href="mailto:trnsys-users@engr.wisc.edu" target="_blank">trnsys-users@engr.wisc.edu</a>><br>
Date: Fri, 4 Mar 2011 15:16:10 +0000<br>Subject: [TRNSYS-users] Questions...please reply<br>
<div>
<span style="font-family: arial,sans-serif; font-size: 16px;"><span title="Clique para obter traduções alternativas"><div><span style="font-family: arial,sans-serif; font-size: 16px;"><span title="Clique para obter traduções alternativas"><br>
</span></span></div>I`m</span> <span title="Clique para obter traduções alternativas">doing a</span> <span title="Clique para obter traduções alternativas">dynamic simulation</span> <span title="Clique para obter traduções alternativas">of buildings</span> <span title="Clique para obter traduções alternativas">in</span> <span title="Clique para obter traduções alternativas">TRNSYS</span><span title="Clique para obter traduções alternativas">, during</span> <span title="Clique para obter traduções alternativas">the</span> <span title="Clique para obter traduções alternativas">simulation</span> <span title="Clique para obter traduções alternativas">gave the following error</span> <span title="Clique para obter traduções alternativas">...</span> <span title="Clique para obter traduções alternativas">as you can see</span> <span title="Clique para obter traduções alternativas">in</span> <span title="Clique para obter traduções alternativas">the picture.</span></span><div>
<span title="Clique para obter traduções alternativas"></span><font face="arial, sans-serif"><br></font><div style="font-family: Tahoma; font-size: 10pt;"><span style="font-family: arial,sans-serif; font-size: 16px;"><span title="Clique para obter traduções alternativas">And</span> <span title="Clique para obter traduções alternativas">also</span><span title="Clique para obter traduções alternativas">,</span> <span title="Clique para obter traduções alternativas">I would like</span> <span title="Clique para obter traduções alternativas">to send me</span> <span title="Clique para obter traduções alternativas">a</span> <span title="Clique para obter traduções alternativas">PDF</span> <span title="Clique para obter traduções alternativas">about</span> <span title="Clique para obter traduções alternativas">connection</span><span title="Clique para obter traduções alternativas">.</span><br>
<br><span title="Clique para obter traduções alternativas">I await your</span> <span title="Clique para obter traduções alternativas">response</span><span title="Clique para obter traduções alternativas">.</span><br><br>
<span title="Clique para obter traduções alternativas">thanks.</span></span></div>
</div> </div>
<br>_______________________________________________<br>
TRNSYS-users mailing list<br>
<a href="mailto:TRNSYS-users@cae.wisc.edu" target="_blank">TRNSYS-users@cae.wisc.edu</a><br>
<a href="https://mailman.cae.wisc.edu/listinfo/trnsys-users" target="_blank">https://mailman.cae.wisc.edu/listinfo/trnsys-users</a><br>
<br></blockquote></div><br>
</blockquote></div><br>
</div></div></div><br>