<br><br><div class="gmail_quote">Dear Mr. Bradley,<br><br>     But I cann't find the ASHRAE Handbook of Fundamentals about<br> 
the Conduction Transfer Function methodology. My  ASHRAE Handbook of Fundamentals is 2009 version.<br>The chapter 4 Heat transfer and Chapter 6 Mass transfer have no informations about  transfer function coefficients.<br>
Please tell me which chapter of the ASHRAE Handbook of Fundamentals contains   transfer function coefficients etc.?<br><br>PLUS: <font face="Arial" size="2"><span>In </span></font>Test 
Data Option of TRNFLOW : about the pressure difference(pa). Please tell me normally what's 
the pressure differnce between outside and inside in winter or summer? The 
trnflow manual <font face="Arial" size="2"><span>and Example Rest_com.tpf 
</span></font>have no detailed introduction. I tried also 20 pa or 0 pa etc. Is 
it OK? <br><br>Many thanks!<br><br>Br.<br><br>wang<br>
<br><br><br><br><br><div><div class="h5">
><br>
><br>
>  Wang,<br>
>   The thermal time constant for a zone in your building is not a simple<br>
> thing to compute. It has to do with the materials in the wall, the<br>
> placement<br>
> of the mass within the wall, the capacitance of the zone, ventilation,<br>
> infiltration, gains, solar radiation, etc. I would think that the easiest<br>
> way to get an estimate of the zone's thermal time constant is to impose a<br>
> step change in one input on it - step change the ambient temperature while<br>
> holding all other inputs constant for example.<br>
><br>
>   The numbers that you see in the *.inf file are transfer function<br>
> coefficients. You can read in the ASHRAE Handbook of Fundamentals about<br>
> the<br>
> Conduction Transfer Function methodology.<br>
> Regards,<br>
>  David<br>
><br>
><br>
><br>
> On 11/3/2010 09:29, 王洋 wrote:<br>
><br>
> Dear all,<br>
><br>
> 1. How to calculate or find the thermal time constant of zone in TRNSYS<br>
> software?<br>
><br>
> ---------- WALL TYPE BST_FL_HEAT_W1      ----------<br>
><br>
>        THERMAL CONDUCTANCE, U=    67.80000 kJ/h m2K; U-Wert=     4.48235<br>
> W/m2K<br>
>               (incl. alpha_i=7.7 W/m^2 K and alpha_o=25 W/m^2 K)<br>
><br>
>                         TRANSFERFUNCTION COEFFICIENTS<br>
>    K            A              B              C              D<br>
><br>
>    0       1.7050117E+02    2.1087019E+01    1.7050117E+02<br>
> 1.0000000E+00<br>
>    1      -1.1800059E+02    3.5808933E+01   -1.1800059E+02<br>
> -1.3683139E-01<br>
>    2       6.0267372E+00    1.6298573E+00    6.0267372E+00<br>
> 4.7362566E-05<br>
>    3      -1.2736107E-03    2.3363784E-04   -1.2736107E-03<br>
>   SUM      5.8526043E+01    5.8526043E+01    5.8526043E+01<br>
> 8.6321597E-01<br>
> What's meaning of A B C D? Are they Wall's TRANSFERFUNCTION COEFFICIENTS?<br>
> And what is the thermal time constant of the whole zone? How to calculate<br>
> or<br>
> find the thermal time constant of the whole zone in TRNSYS software?<br>
> Need I   calculate by myself the whole zone's TRANSFERFUNCTION based on<br>
> all<br>
> the walls of the zone or others?<br>
><br>
> 2.  How to calculate or find air volume flow of the window opening in<br>
> TRNFlow software?<br>
>  The window opening area (m2)is known. Whether it needs the wind<br>
> speed(m/s)<br>
> or not?<br>
><br>
> Many thanks!<br>
><br>
> Br.<br>
><br>
> wang<br>
>  2010/11/3 <<a href="mailto:trnsys-users-request@cae.wisc.edu">trnsys-users-request@cae.wisc.edu</a>><br>
><br>
>> Send TRNSYS-users mailing list submissions to<br>
>>        <a href="mailto:trnsys-users@cae.wisc.edu">trnsys-users@cae.wisc.edu</a><br>
>><br>
>> To subscribe or unsubscribe via the World Wide Web, visit<br>
>>        <a href="https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users" target="_blank">https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users</a><br>
>> or, via email, send a message with subject or body 'help' to<br>
>>        <a href="mailto:trnsys-users-request@cae.wisc.edu">trnsys-users-request@cae.wisc.edu</a><br>
>><br>
>> You can reach the person managing the list at<br>
>>        <a href="mailto:trnsys-users-owner@cae.wisc.edu">trnsys-users-owner@cae.wisc.edu</a><br>
>><br>
>> When replying, please edit your Subject line so it is more specific<br>
>> than "Re: Contents of TRNSYS-users digest..."<br>
>><br>
>> Today's Topics:<br>
>><br>
>>   1. Re: GenOpt optimization: problem for the second generation<br>
>>      after 5 simulations (Thibaut VITTE)<br>
>>   2. Re: google sketchup+trnsys3d (hotline)<br>
>>   3. input file (Emiliano Casati - 3ME)<br>
>>   4. Re: GenOpt optimization: problem for the secondgeneration<br>
>>      after 5 simulations (Timothy McDowell)<br>
>><br>
>><br>
>> ---------- 已转发邮件 ----------<br>
>> From: Thibaut VITTE <<a href="mailto:thibaut.vitte@h3c-energies.fr">thibaut.vitte@h3c-energies.fr</a>><br>
>> To: <a href="mailto:trnsys-users@cae.wisc.edu">trnsys-users@cae.wisc.edu</a><br>
>> Date: Wed, 03 Nov 2010 11:27:53 +0100<br>
>> Subject: Re: [TRNSYS-users] GenOpt optimization: problem for the second<br>
>> generation after 5 simulations<br>
>> Dear Alexis,<br>
>><br>
>> I've had a similar error when I used Genopt. I've had several components<br>
>> tracked by a "trace" command that made my list file enormous (more than<br>
>> 100Mb) and genopt could'nt handle that amount of data.<br>
>><br>
>> Just my 2cents.<br>
>><br>
>> Thibaut<br>
>> --<br>
>><br>
>> Le futur maîtrisé<br>
>><br>
>>  Thibaut VITTE<br>
>><br>
>> Docteur - Ingénieur Energies<br>
>><br>
>> Mail : <a href="mailto:thibaut.vitte@h3c-energies.fr">thibaut.vitte@h3c-energies.fr</a><br>
>><br>
>> -----------------------------<br>
>><br>
>> H3C-énergies<br>
>><br>
>> 35, chemin du vieux Chêne - 38240 MEYLAN<br>
>><br>
>> Tél : 04 76 41 88 66 – Fax : 04 76 41 28 94<br>
>><br>
>> <a href="http://www.h3c-energies.fr" target="_blank">www.h3c-energies.fr</a><br>
>><br>
>><br>
>> -----------------------------------------------------------------------------------<br>
>><br>
>> Afin de contribuer au respect de l'environnement, merci de n'imprimer ce<br>
>> message qu'en cas de nécessité.<br>
>><br>
>> In order to respect the environment, please don't print this e-mail<br>
>> unless<br>
>> you really need to.<br>
>><br>
>><br>
>> ---------- 已转发邮件 ----------<br>
>> From: "hotline" <<a href="mailto:hotline@transsolar.com">hotline@transsolar.com</a>><br>
>> To: "julia.feste" <<a href="mailto:julia.feste@whitepavilion.com.cn">julia.feste@whitepavilion.com.cn</a>><br>
>> Date: Wed, 3 Nov 2010 11:37:08 +0100<br>
>> Subject: Re: [TRNSYS-users] google sketchup+trnsys3d<br>
>> Hi,<br>
>><br>
>> that's a well known problem that will be fixed in the next version.<br>
>> Hopefully upcoming within the next weeks.<br>
>><br>
>> Regards<br>
>> Christian<br>
>><br>
>> TRANSSOLAR Software Team<br>
>> <a href="mailto:hotline@transsolar.com">hotline@transsolar.com</a><br>
>><br>
>> <a href="http://www.trnsys.de" target="_blank">www.trnsys.de</a><br>
>> Transsolar KlimaEngineering - Technologien für energieeffizientes Bauen<br>
>> und Nutzerkomfort in Gebäuden<br>
>> Transsolar Energietechnik GmbH, Curiestrasse 2, 70563 Stuttgart /<br>
>> Amtsgericht Stuttgart - HRB 23347 / USt-IdNr.: 99073/00911<br>
>> Geschäftsführer: Dipl.Ing. Matthias Schuler, Dipl.Ing. Thomas Auer,<br>
>> Dipl.Phys. Stefan Holst, Prof. Volkmar Bleicher<br>
>><br>
>> -----Ursprüngliche Nachricht-----<br>
>> Von: julia.feste [mailto:<a href="mailto:julia.feste@whitepavilion.com.cn">julia.feste@whitepavilion.com.cn</a>]<br>
>> Gesendet: Mittwoch, 3. November 2010 06:46<br>
>> An: <a href="mailto:trnsys-users@cae.wisc.edu">trnsys-users@cae.wisc.edu</a><br>
>> Betreff: [TRNSYS-users] google sketchup+trnsys3d<br>
>><br>
>><br>
>> Hello everybody,<br>
>> Thanks for your posts that's always really interesting!<br>
>> I come up with a problem using Google Sketchup and TRNSYS3D: inside a<br>
>> TRNSYS zone, I draft a square, then I want to pull it up at a certain<br>
>> height, so I write the number then Enter, and this error appears:<br>
>><br>
>> <-----Beginning of the error-----><br>
>> ERROR:<br>
>> NoMethodError<br>
>> undefined method `position' for<br>
>> #<Sketchup::AttributeDictionary:0xfcb4eb8><br>
>><br>
>> BACKTRACE:<br>
>> C:/Program Files/Google/Google SketchUp<br>
>> 8/Plugins/Trnsys3d/sketchup/Sketchup.rb:309:in `polygon_loop'<br>
>> C:/Program Files/Google/Google SketchUp<br>
>> 8/Plugins/Trnsys3d/sketchup/Sketchup.rb:309:in `each'<br>
>> C:/Program Files/Google/Google SketchUp<br>
>> 8/Plugins/Trnsys3d/sketchup/Sketchup.rb:309:in `polygon_loop'<br>
>> C:/Program Files/Google/Google SketchUp<br>
>> 8/Plugins/Trnsys3d/sketchup/Sketchup.rb:321:in `outer_polygon'<br>
>> C:/Program Files/Google/Google SketchUp<br>
>> 8/Plugins/Trnsys3d/sketchup/Sketchup.rb:326:in `polygon'<br>
>> C:/Program Files/Google/Google SketchUp<br>
>> 8/Plugins/Trnsys3d/lib/interfaces/DrawingUtils.rb:27:in<br>
>> `detect_base_face'<br>
>> C:/Program Files/Google/Google SketchUp<br>
>> 8/Plugins/Trnsys3d/lib/interfaces/DrawingUtils.rb:20:in `each'<br>
>> C:/Program Files/Google/Google SketchUp<br>
>> 8/Plugins/Trnsys3d/lib/interfaces/DrawingUtils.rb:20:in<br>
>> `detect_base_face'<br>
>> C:/Program Files/Google/Google SketchUp<br>
>> 8/Plugins/Trnsys3d/lib/interfaces/BaseSurface.rb:254:in `face_polygon'<br>
>> C:/Program Files/Google/Google SketchUp<br>
>> 8/Plugins/Trnsys3d/lib/interfaces/BaseSurface.rb:253:in `each'<br>
>> C:/Program Files/Google/Google SketchUp<br>
>> 8/Plugins/Trnsys3d/lib/interfaces/BaseSurface.rb:253:in `face_polygon'<br>
>> C:/Program Files/Google/Google SketchUp<br>
>> 8/Plugins/Trnsys3d/lib/interfaces/Surface.rb:107:in<br>
>> `update_input_object'<br>
>> C:/Program Files/Google/Google SketchUp<br>
>> 8/Plugins/Trnsys3d/lib/interfaces/BaseSurface.rb:94:in<br>
>> `update_input_object'<br>
>> C:/Program Files/Google/Google SketchUp<br>
>> 8/Plugins/Trnsys3d/lib/interfaces/DrawingInterface.rb:353:in<br>
>> `on_change_entity'<br>
>> C:/Program Files/Google/Google SketchUp<br>
>> 8/Plugins/Trnsys3d/lib/observers/FaceObserver.rb:32:in `onChangeEntity'<br>
>> C:/Program Files/Google/Google SketchUp<br>
>> 8/Plugins/Trnsys3d/lib/AsynchProc.rb:17:in `initialize'<br>
>><br>
>> <-----End of the error-----><br>
>><br>
>> When I pull it up manual, I don't have any problem, just when I write<br>
>> the number.<br>
>><br>
>> Thanks in advance for your help,<br>
>> Julia.<br>
>> ________________________________________<br>
>> From: <a href="mailto:trnsys-users-request@cae.wisc.edu">trnsys-users-request@cae.wisc.edu</a><br>
>> [<a href="mailto:trnsys-users-request@cae.wisc.edu">trnsys-users-request@cae.wisc.edu</a>]<br>
>> Sent: Wednesday, November 03, 2010 1:04 AM<br>
>> To: <a href="mailto:trnsys-users@cae.wisc.edu">trnsys-users@cae.wisc.edu</a><br>
>> Subject: TRNSYS-users Digest, Vol 71, Issue 4<br>
>><br>
>> Send TRNSYS-users mailing list submissions to<br>
>>        <a href="mailto:trnsys-users@cae.wisc.edu">trnsys-users@cae.wisc.edu</a><br>
>><br>
>> To subscribe or unsubscribe via the World Wide Web, visit<br>
>>        <a href="https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users" target="_blank">https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users</a><br>
>> or, via email, send a message with subject or body 'help' to<br>
>>        <a href="mailto:trnsys-users-request@cae.wisc.edu">trnsys-users-request@cae.wisc.edu</a><br>
>><br>
>> You can reach the person managing the list at<br>
>>        <a href="mailto:trnsys-users-owner@cae.wisc.edu">trnsys-users-owner@cae.wisc.edu</a><br>
>><br>
>> When replying, please edit your Subject line so it is more specific than<br>
>> "Re: Contents of TRNSYS-users digest..."<br>
>><br>
>> _______________________________________________<br>
>> TRNSYS-users mailing list<br>
>> <a href="mailto:TRNSYS-users@cae.wisc.edu">TRNSYS-users@cae.wisc.edu</a><br>
>> <a href="https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users" target="_blank">https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users</a><br>
>><br>
>><br>
>><br>
>><br>
>><br>
>><br>
>><br>
>> ---------- 已转发邮件 ----------<br>
>> From: "Emiliano Casati - 3ME" <<a href="mailto:E.I.M.Casati@tudelft.nl">E.I.M.Casati@tudelft.nl</a>><br>
>> To: <<a href="mailto:trnsys-users@cae.wisc.edu">trnsys-users@cae.wisc.edu</a>><br>
>> Date: Wed, 3 Nov 2010 13:19:58 +0100<br>
>> Subject: [TRNSYS-users] input file<br>
>><br>
>> Hi to everybody!<br>
>><br>
>> I don’t understand why, for certain projects, I can’t open the input<br>
>> file,<br>
>> the message is “the system cannot find the path specified”.<br>
>><br>
>> Where should I find the input file?<br>
>><br>
>><br>
>><br>
>> Thanks a lot<br>
>><br>
>><br>
>><br>
>> ec<br>
>><br>
>><br>
>> ---------- 已转发邮件 ----------<br>
>> From: "Timothy McDowell" <<a href="mailto:mcdowell@tess-inc.com">mcdowell@tess-inc.com</a>><br>
>> To: "Thibaut VITTE" <<a href="mailto:thibaut.vitte@h3c-energies.fr">thibaut.vitte@h3c-energies.fr</a>>,<br>
>> <a href="mailto:trnsys-users@cae.wisc.edu">trnsys-users@cae.wisc.edu</a><br>
>> Date: Wed, 3 Nov 2010 07:23:05 -0500 (CDT)<br>
>> Subject: Re: [TRNSYS-users] GenOpt optimization: problem for the<br>
>> secondgeneration after 5 simulations<br>
>> This type of error in GenOpt is usually caused by an error in the TRNSYS<br>
>> simulation.  You need to check the *.lst file for the TRNSYS run to see<br>
>> what the TRNSYS error is.<br>
>><br>
>> Regards,<br>
>><br>
>> Tim<br>
>><br>
>><br>
>><br>
>><br>
>><br>
>> ----------------------------------<br>
>> Timothy McDowell<br>
>> Executive Vice President<br>
>> Thermal Energy System Specialists, LLC<br>
>> 22 N. Carroll St, Suite 370<br>
>> Madison, WI 53703<br>
>> Phone: 608-274-2577<br>
>> Fax: 608-278-1475<br>
>><br>
>> ----- Original Message -----<br>
>> From: "Thibaut VITTE" <<a href="mailto:thibaut.vitte@h3c-energies.fr">thibaut.vitte@h3c-energies.fr</a>><br>
>> Sent: Wed, November 3, 2010 5:27<br>
>> Subject:Re: [TRNSYS-users] GenOpt optimization: problem for the<br>
>> secondgeneration after 5 simulations<br>
>><br>
>><br>
>><br>
>><br>
>><br>
>><br>
>><br>
>><br>
>><br>
>>    Dear Alexis,<br>
>><br>
>>    I've had a similar error when I used Genopt. I've had several<br>
>>    components tracked by a "trace" command that made my list file<br>
>>    enormous (more than 100Mb) and genopt could'nt handle that amount of<br>
>>    data.<br>
>><br>
>>    Just my 2cents.<br>
>><br>
>>    Thibaut<br>
>>    --<br>
>><br>
>><br>
>> .bodyclass      @page { size: 8.5in 11in; margin-top: 0.7874in;<br>
>> margin-bottom:<br>
>> 0.7874in; margin-left: 0.7874in; margin-right: 0.7874in }<br>
>> .bodyclass      table { border-collapse:collapse; border-spacing:0;<br>
>> empty-cells:show }<br>
>> .bodyclass      td, th { vertical-align:top; font-size:12pt;}<br>
>> .bodyclass      h1, h2, h3, h4, h5, h6 { clear:both }<br>
>> .bodyclass      ol, ul { margin:0; padding:0;}<br>
>> .bodyclass      li { list-style: none; margin:0; padding:0;}<br>
>> .bodyclass      li span.odfLiEnd { clear: both; line-height:0; width:0;<br>
>> height:0; margin:0; padding:0; }<br>
>> .bodyclass      span.footnodeNumber { padding-right:1em; }<br>
>> .bodyclass      * { margin:0; }<br>
>> .bodyclass      .fr1 { font-size:12pt; text-align:center;<br>
>> vertical-align:top;<br>
>> margin-left:0in; margin-right:0in; margin-top:0in; margin-bottom:0in;<br>
>> padding:0in; border-style:none; }<br>
>> .bodyclass      .P1 { font-size:12pt; margin-bottom:0in; margin-top:0in;<br>
>> font-family:Times New Roman; text-align:center ! important; }<br>
>> .bodyclass      .P10 { font-size:7.5pt; margin-bottom:0in;<br>
>> margin-top:0in;<br>
>> font-family:Tahoma, sans-serif; text-align:justify ! important;<br>
>> color:#f79646; }<br>
>> .bodyclass      .P2 { font-size:9pt; margin-bottom:0in; margin-top:0in;<br>
>> font-family:Tahoma, sans-serif; text-align:center ! important;<br>
>> color:#e36c0a; font-style:italic; font-weight:bold; }<br>
>> .bodyclass      .P3 { font-size:9pt; margin-bottom:0in; margin-top:0in;<br>
>> font-family:Tahoma, sans-serif; text-align:justify ! important;<br>
>> color:#e36c0a; font-weight:bold; }<br>
>> .bodyclass      .P4 { font-size:9pt; margin-bottom:0in; margin-top:0in;<br>
>> font-family:Tahoma, sans-serif; text-align:justify ! important;<br>
>> color:#e36c0a; font-weight:bold; }<br>
>> .bodyclass      .P5 { font-size:7.5pt; margin-bottom:0in;<br>
>> margin-top:0in;<br>
>> font-family:Tahoma, sans-serif; color:#e36c0a; font-weight:bold; }<br>
>> .bodyclass      .P6 { font-size:7.5pt; margin-bottom:0in;<br>
>> margin-top:0in;<br>
>> font-family:Tahoma, sans-serif; text-align:justify ! important;<br>
>> color:#3329b1; }<br>
>> .bodyclass      .P61 { font-size:8.5pt; margin-bottom:0in;<br>
>> margin-top:0in;<br>
>> font-family:Tahoma, sans-serif; text-align:justify ! important;<br>
>> color:#3329b1; }<br>
>> .bodyclass      .P7 { font-size:7.5pt; margin-bottom:0in;<br>
>> margin-top:0in;<br>
>> font-family:Tahoma, sans-serif; text-align:justify ! important;<br>
>> color:#3329b1; font-style:italic; }<br>
>> .bodyclass      .P8 { font-size:7.5pt; margin-bottom:0in;<br>
>> margin-top:0in;<br>
>> font-family:Tahoma, sans-serif; text-align:justify ! important;<br>
>> color:#3329b1; font-style:italic; }<br>
>> .bodyclass      .P9 { font-size:12pt; margin-bottom:0in; margin-top:0in;<br>
>> font-family:Times New Roman; text-align:justify ! important; }<br>
>> .bodyclass      .P91 { font-size:12pt; margin-bottom:0in;<br>
>> margin-top:0.05in;<br>
>> font-family:Times New Roman; text-align:justify ! important; }<br>
>> .bodyclass      .Standard { font-size:12pt; font-family:Times New Roman;<br>
>> }<br>
>> .bodyclass      .T1 { color:#f79646; }<br>
>> .bodyclass      .T2 { color:#f79646; font-family:Tahoma, sans-serif;<br>
>> font-size:7.5pt; }<br>
>> .bodyclass      .T3 { color:#3329b1; font-family:Tahoma, sans-serif;<br>
>> font-size:7.5pt; }<br>
>> .bodyclass      { }<br>
>><br>
>><br>
>><br>
>><br>
>><br>
>><br>
>><br>
>><br>
>><br>
>><br>
>>                  Le futur maîtrisé<br>
>><br>
>><br>
>><br>
>><br>
>><br>
>><br>
>><br>
>>              Thibaut VITTE<br>
>>              Docteur - Ingénieur Energies<br>
>>              Mail : <a href="mailto:thibaut.vitte@h3c-energies.fr">thibaut.vitte@h3c-energies.fr</a><br>
>><br>
>>              -----------------------------<br>
>>              H3C-énergies<br>
>>              35, chemin du vieux Chêne - 38240 MEYLAN<br>
>>              Tél : 04 76 41 88 66 – Fax : 04 76 41 28<br>
>>                  94<br>
>>              <a href="http://www.h3c-energies.fr" target="_blank">www.h3c-energies.fr</a><br>
>><br>
>><br>
>><br>
>><br>
>><br>
>><br>
>><br>
>><br>
>>  -----------------------------------------------------------------------------------<br>
>>      Afin de contribuer au respect de l'environnement,<br>
>>        merci de n'imprimer ce message qu'en cas de nécessité.<br>
>>      In order to respect the environment, please don't<br>
>>        print this e-mail unless you really need to.<br>
>><br>
>><br>
>><br>
>><br>
>><br>
>><br>
>> _______________________________________________<br>
>> TRNSYS-users mailing list<br>
>> <a href="mailto:TRNSYS-users@cae.wisc.edu">TRNSYS-users@cae.wisc.edu</a><br>
>> <a href="https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users" target="_blank">https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users</a><br>
>><br>
>><br>
>> ----- End of original message -----<br>
>><br>
>><br>
>><br>
>> _______________________________________________<br>
>> TRNSYS-users mailing list<br>
>> <a href="mailto:TRNSYS-users@cae.wisc.edu">TRNSYS-users@cae.wisc.edu</a><br>
>> <a href="https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users" target="_blank">https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users</a><br>
>><br>
>><br>
><br>
> _______________________________________________<br>
> TRNSYS-users mailing<br>
</div></div><br>> listTRNSYS-users@cae.wisc.eduhttps://<a href="http://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users" target="_blank">www-old.cae.wisc.edu/mailman/listinfo/trnsys-users</a><br>
<div class="im">><br>
><br>
> --<br>
> ***************************<br>
> David BRADLEY<br>
> Principal<br>
> Thermal Energy Systems Specialists, LLC<br>
> 22 North Carroll Street - suite 370<br>
> Madison, WI  53703 USA<br>
><br>
> P:+1.608.274.2577<br>
</div>> <a href="mailto:F%3A%2B1.608.278.1475d.bradley@tess-inc.com">F:+1.608.278.1475d.bradley@tess-inc.com</a><br>
<div><div></div><div class="h5">> http://www.tess-inc.comhttp://<a href="http://www.trnsys.com" target="_blank">www.trnsys.com</a><br>
><br>
<br>
<br>
</div></div></div><br>