<font size=2 face="sans-serif">Hi,</font>
<br>
<br><font size=2 face="sans-serif">After resolve some doubts about how
to simulate my building model , now I´m triying to use mediterranean meteorology
 but the extensions are .met and I need .tm2 </font>
<br><font size=2 face="sans-serif">what can I do? How can I convert? Can
I use this extensions in ny model?</font>
<br>
<br><font size=2 face="sans-serif">On another hand, we want to resolve
different kind of buildings( housing, office,...), all of them using TABS</font>
<br><font size=2 face="sans-serif">Which is the best way,TRNSYS 16 or TRNSYS
LITE? What do you recommend? Why?</font>
<br>
<br><font size=2 face="sans-serif">Regards</font>
<br>
<br><font size=2 face="sans-serif">David Irusta</font>
<br>
<br>
<br>
<br><font size=1 color=#5f5f5f face="sans-serif">De:      
 </font><font size=1 face="sans-serif">David BRADLEY <d.bradley@tess-inc.com></font>
<br><font size=1 color=#5f5f5f face="sans-serif">Para:      
 </font><font size=1 face="sans-serif">david.irusta@idom.com</font>
<br><font size=1 color=#5f5f5f face="sans-serif">cc:      
 </font><font size=1 face="sans-serif">trnsys-users@cae.wisc.edu</font>
<br><font size=1 color=#5f5f5f face="sans-serif">Fecha:      
 </font><font size=1 face="sans-serif">03/12/2010 17:37</font>
<br><font size=1 color=#5f5f5f face="sans-serif">Asunto:    
   </font><font size=1 face="sans-serif">Re: [TRNSYS-users]
HELP TRNSYS 16</font>
<br>
<hr noshade>
<br>
<br>
<br><font size=3>David<br>
</font>
<br><font size=2 face="sans-serif">-How do you Know if the horizontal wall
is floor o ceiling?</font><font size=3> </font>
<br><font size=3>The TRNSYS 16 building model was non-geometric; when you
define a horizontal surface, the only thing that indicates whether it is
a floor or a ceiling is the condition that you impose on the opposite side
of the surface.</font>
<br><font size=2 face="sans-serif">-Creating a Multizone Building, <br>
        when you have to decide the outputs,how can
you select a surface(to choose for example TOFL) instead of a Thermal zone?</font><font size=3>
</font>
<br><font size=3>there are a number of radio buttons across the middle
of the window. You still select a zone but then you switch to "surface
outputs" and you will see the available NTYPEs for the surfaces in
that zone.</font>
<br><font size=2 face="sans-serif">        how can
you do a multistorey building??</font><font size=3> </font>
<br><font size=3>The ceiling of one zone is set as wall type "ADJACENT"
and you indicate the name of the zone above whose floor is the same as
that ceiling.</font>
<br><font size=2 face="sans-serif">I´m interested in create a model about
TABS (thermal active building system) which includes active layers</font><font size=3>
</font><font size=2 face="sans-serif"><br>
-where can I find examples or tutorials with TRNSYS 16? </font>
<br><font size=3>I believe that some of the feedback controller examples
(..trnsys16\Examples\...) show how to use the active layers.<br>
<br>
Best,<br>
 David<br>
</font>
<br><tt><font size=3>-- <br>
***************************<br>
David BRADLEY<br>
Principal<br>
Thermal Energy Systems Specialists, LLC<br>
22 North Carroll Street - suite 370<br>
Madison, WI  53703 USA<br>
<br>
P:+1.608.274.2577<br>
F:+1.608.278.1475<br>
</font></tt><a href="mailto:d.bradley@tess-inc.com"><tt><font size=3 color=blue><u>d.bradley@tess-inc.com</u></font></tt></a><tt><font size=3><br>
<br>
</font></tt><a href="http://www.tess-inc.com/"><tt><font size=3 color=blue><u>http://www.tess-inc.com</u></font></tt></a><tt><font size=3><br>
</font></tt><a href=http://www.trnsys.com/><tt><font size=3 color=blue><u>http://www.trnsys.com</u></font></tt></a>
<br>