<br><font size=2 face="sans-serif">Dear all:</font>
<br>
<br><font size=2 face="sans-serif">I am working on a trnflow simulation
(an apartment with passive stack exhausts), and having some convergence
problems. After looking at it I have found these problems occur whenever
the outside temperature gets significantly higher than the interior temperature,
as you can see in the attached image. Any suggestion on how to deal with
this?</font>
<br>
<br><font size=2 face="sans-serif">Thanks,</font>
<br>
<br><img src=cid:_1_074C31FC074C2DF00018BC63C12577AB>
<br>
<br><font size=2 face="sans-serif">Francisco Rodríguez Pérez-Curiel<br>
<br>
TECNALIA-Construcción<br>
Parque Tecnológico, Edificio 700. E-48160 Derio (Bizkaia) (SPAIN)<br>
Tel. +34 94 607 33 00,  Fax. +34 94 607 33 49<br>
francisco.rodriguez@tecnalia.com,<br>
www.tecnalia.com<br>
<br>
**************** AVISO LEGAL  **************** DISCLAIMER ******************<br>
Este mensaje es personal y confidencial y su uso no autorizado está prohibido
legalmente. Si usted no es el destinatario, proceda a borrarlo, sin reenviarlo
ni conservarlo.<br>
This message is personal and confidential, unauthorised use is legally
prohibited. If you are not the intended recipient, delete it without resending
or backing it.<br>
**************************************************************************************</font>