<table cellspacing="0" cellpadding="0" border="0" ><tr><td valign="top" style="font: inherit;">Dear TRNSYS user,<br><br>I know that using a program like radiance would be the proper approach but I hope I can get some feetback on my thoughts for determing luminace on the floor plane of a zone.<br><br>Is it possible to use NType 79 (solar (direct+diffuse) radiation absorbed at inside surface) and following simplifications:<br><br>1. solar radiation shining on the surface is NType 79 divided by solar absorptance factor of the surface<br>2. equal luminace distribution over the surface<br>3. luminous efficancy of global solar radiation ~105 lumen/W<br>4. luminous efficacy radiating on the floor is the same, so transmission through windows and reflection on opaque surfaces doesn´t affect the luminous efficancy of sunlight<br><br>A more detailed approach would be to use NType 80 (solar direct radiation absorbed at inside surface) and NType 81 (solar diffus
 radiation absorbed at inside surface) with<br>- luminous efficany of direct sunlight between 70-105 lumen/W depending on solar altitude<br>- of diffus sunlight between 110-130 lumen/W depending on cloudiness.<br><br>I am not sure if simplification No4 tolerable for reflection. Windows filter UV-light which doesnt affect luminance so for transmission it should be ok. But I dont konw how reflection on opaque surfaces alter the wavelenght spectrum of sunlight.<br><br>regards Philipp<br><br><br><br><br></td></tr></table><br>