<br><font size=2 face="sans-serif">Dear all,</font>
<br>
<br><font size=2 face="sans-serif">I am working on a rather simple trnflow
simulation, and having convergence problems even at very low timesteps
and high tolerances (in the simulation control cards). When I turn off
trnflow everything is OK.</font>
<br><font size=2 face="sans-serif">Is there anything I can do about this?
Should I try and modify these parameters in the type56a-Trnflow parameter
list as well?</font>
<br>
<br><font size=2 face="sans-serif">Thanks in advance,</font>
<br>
<br><font size=2 face="sans-serif">Francisco Rodríguez Pérez-Curiel<br>
<br>
TECNALIA-Construcción<br>
Parque Tecnológico, Edificio 700. E-48160 Derio (Bizkaia) (SPAIN)<br>
Tel. +34 94 607 33 00,  Fax. +34 94 607 33 49<br>
francisco.rodriguez@tecnalia.com,<br>
www.tecnalia.com<br>
<br>
**************** AVISO LEGAL  **************** DISCLAIMER ******************<br>
Este mensaje es personal y confidencial y su uso no autorizado está prohibido
legalmente. Si usted no es el destinatario, proceda a borrarlo, sin reenviarlo
ni conservarlo.<br>
This message is personal and confidential, unauthorised use is legally
prohibited. If you are not the intended recipient, delete it without resending
or backing it.<br>
**************************************************************************************</font>