Dear Elias Sasati,<br><br>Have you turned on heating and cooling in TRNBuild and defined set temperatures in the type managers? This is required to output the energy demand of the building.<br><br>Best regards,<br>Knut Erik Enerstvedt<br>
<br><br>>Dear TRNSYS users,<div><br></div><div>>After creating my building in 
TRNBuild, setting the wall types, creating the zones, manage the 
schedules and doing all the >requirements, I try to simulate the bulding 
in different climate data. </div>
<div>>I am creating a new multizone project in TRNSYS Simulation Studio 
and let the program guide me. Then I double click on the building >icon 
 I am replacing the path with the location of my .bui file in "External 
Files" tab. </div>
<div>>I change the parameters of the Temperature plotter (Type 65d) to meet the case and connect the:</div><div><ul><li> "temperature air node of ZoneN" (TAIR_N) -> "left axis variable N" </li></ul>
</div>
<div>> and then the:</div><div><ul><li> (sens. energy demand of zone N) QsensN -> "right variable axis N".</li></ul></div><div>> When I run the simulation I am getting only the room temperatures without the energy demand plotted. </div>

<div><br></div><div>>Any ideas how I can get the energy demand (Q) for 
heating and cooling according to the climate data to keep the zone 
temperatures >fixed to my prefernce. I am using TNSYS 16.</div><div><br></div><div><br>
</div><div><br></div><div>>Thank you for your time,</div><div>>Elias Sasati</div>