<br><font size=2 face="sans-serif">Dear Laia,</font>
<br>
<br><font size=2 face="sans-serif">You could create the window not as an
opening in the wall, but as an "aditional window" which is not
linked to any wall.</font>
<br><font size=2 face="sans-serif">This way you can assign a different
orientation to each of them. Then you can link the shading device to the
orientation referred to the shaded element while mantaining the unshaded
orientation for the other surface.</font>
<br>
<br><font size=2 face="sans-serif">Hope that helps.</font>
<br>
<br>
<br>
<br><font size=2 face="sans-serif">--------------------------------------------------------------------------<br>
Roberto Garay Martinez<br>
Labein-Tecnalia<br>
Unidad de Construcción y Desarrollo del Territorio<br>
c/Geldo. Parque Tecnológico de Bizkaia<br>
Edificio 700<br>
48160 Derio (Bizkaia)<br>
Tel.: 34 94 607 33 00<br>
Fax: 34 94 607 33 49<br>
www.labein.es<br>
---------------------------------------------------------------------------<br>
Visite nuestro blog:<br>
http://www.energiaenedificacion.com <br>
--------------------------------------------------------------------------<br>
</font>
<br>
<br>
<br>
<table width=100%>
<tr valign=top>
<td width=40%><font size=1 face="sans-serif"><b>trnsys-users-request@cae.wisc.edu</b>
</font>
<p><font size=1 face="sans-serif">16/07/2010 12:58</font>
<table border>
<tr valign=top>
<td bgcolor=white>
<div align=center><font size=1 face="sans-serif">Por favor, responda a<br>
trnsys-users@cae.wisc.edu</font></div></table>
<br>
<td width=59%>
<table width=100%>
<tr valign=top>
<td>
<div align=right><font size=1 face="sans-serif">Para</font></div>
<td><font size=1 face="sans-serif">trnsys-users@cae.wisc.edu</font>
<tr valign=top>
<td>
<div align=right><font size=1 face="sans-serif">cc</font></div>
<td>
<tr valign=top>
<td>
<div align=right><font size=1 face="sans-serif">Asunto</font></div>
<td><font size=1 face="sans-serif">TRNSYS-users Digest, Vol 67, Issue 44</font></table>
<br>
<table>
<tr valign=top>
<td>
<td></table>
<br></table>
<br>
<br>
<br><tt><font size=2>Send TRNSYS-users mailing list submissions to<br>
trnsys-users@cae.wisc.edu<br>
<br>
To subscribe or unsubscribe via the World Wide Web, visit<br>
https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users<br>
or, via email, send a message with subject or body 'help' to<br>
trnsys-users-request@cae.wisc.edu<br>
<br>
You can reach the person managing the list at<br>
trnsys-users-owner@cae.wisc.edu<br>
<br>
When replying, please edit your Subject line so it is more specific<br>
than "Re: Contents of TRNSYS-users digest..."<br>
Today's Topics:<br>
<br>
1. Type 43 external file format and active layer
activation (Chris)<br>
2. shades in openings by type67 and 68 (Laia Cases - iMat)<br>
</font></tt><font size=2 color=#800080 face="sans-serif"><br>
----- Mensaje de Chris <clashmar@shaw.ca> en Thu, 15 Jul 2010 21:05:03
-0600 -----</font>
<table>
<tr>
<td>
<div align=right><font size=3><b>Para:</b></font></div>
<td><font size=3>trnsys-users@engr.wisc.edu</font>
<tr>
<td>
<div align=right><font size=3><b>Asunto:</b></font></div>
<td><font size=3>[TRNSYS-users] Type 43 external file format and active
layer activation</font></table>
<br><tt><font size=2> Hello,<br>
<br>
I have two questions:<br>
<br>
1) I am trying find the input file format required for the Type 43a <br>
(Part Load Performance). I can't find any documentation that describes
<br>
this nor have I found an example. Can someone point me in the right
<br>
direction?<br>
<br>
2) I want to create an active layer type but the "Active Layer"
radio <br>
button in the Layer Type Manager is greyed out. How do I make this
<br>
available?<br>
<br>
Thank you in advance,<br>
Chris Lashmar<br>
<br>
<br>
<br>
<br>
</font></tt><font size=2 color=#800080 face="sans-serif"><br>
----- Mensaje de Laia Cases - iMat <lcases@imat.cat> en Fri, 16 Jul
2010 12:58:23 +0200 -----</font>
<table>
<tr>
<td>
<div align=right><font size=3><b>Para:</b></font></div>
<td><font size=3>trnsys-users@cae.wisc.edu</font>
<tr>
<td>
<div align=right><font size=3><b>Asunto:</b></font></div>
<td><font size=3>[TRNSYS-users] shades in openings by type67 and 68</font></table>
<br><font size=3>Hi trnsys users,<br>
<br>
how do I manage if in the same facade there are one window(window1) with
shade by overhang and by shading mash, and another window(window2) without
overhang and with same shading mask as windiow1? as i understand, there
is a problem if one use 2 type67 or 2 type68. By the other hand, if I use
type68 with type34 for window1 and type 67 for window2, I get less demand
of heating for window1 than for window 2, that is not congruent. <br>
I hope it is understanding, any suggestion?<br>
<br>
thanks in advance<br>
<br>
Laia<br>
<br>
</font>
<br><font size=3>-- </font>
<table>
<tr valign=top>
<td><img src=cid:_2_07B5C8D007B5C51400479C9EC1257762>
<td><font size=1 color=#008000 face="Arial"><b>Laia Cases</b><br>
Unitat de Condicionament Tèrmic<b><br>
iMat - Centre Tecnològic de la Construcció<u><br>
</u></b></font><a href=mailto:lcases@imat.cat><font size=1 color=#008000 face="Arial"><b><u>lcases@imat.cat</u></b></font></a><font size=1 color=#008000 face="Arial"><b><u><br>
</u></b></font><a href=http://www.imat.cat/><font size=1 color=#008000 face="Arial"><b><u>www.imat.cat</u></b></font></a>
<tr>
<td><img src=cid:_2_07B5D69007B5D2A800479C9EC1257762>
<td><font size=1 color=#008000 face="Arial">Wellington 23 ·
E-08018 Barcelona<br>
T +34 93 553 97 95<br>
F +34 93 553 97 96<br>
Imprimiu aquest document només si és necessari</font><font size=3> </font></table>
<br><tt><font size=2>_______________________________________________<br>
TRNSYS-users mailing list<br>
TRNSYS-users@cae.wisc.edu<br>
https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users<br>
</font></tt>
<br>