<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html; charset=ISO-8859-1"
http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
Salim,<br>
I assume that you are using Type56; bear in mind that the Type56
building model is much more complex than a simple u-value multiplied by
the building area. If you want an idea of the u-value for a particular
wall, you can look at the wall type manager. The value reported there
assumes constant inner and outer convection and radiation coefficients.
You can get the total (static) UA for a zone using NTYPE27. When the
simulation is running, the inside and outside coefficients are changing
with time and you should look to the energy gain/loss NTYPEs for
specific surfaces to get those values.<br>
Best,<br>
David<br>
<br>
<br>
On 5/3/2010 04:55, salim mokraoui wrote:
<blockquote
cite="mid:000f01caeaa6$cc4d2900$64e77b00$@mokraoui@lermab.uhp-nancy.fr"
type="cite">
<meta http-equiv="Content-Type"
content="text/html; charset=ISO-8859-1">
<meta name="Generator" content="Microsoft Word 12 (filtered medium)">
<style>
<!--
/* Font Definitions */
@font-face
{font-family:"Cambria Math";
panose-1:2 4 5 3 5 4 6 3 2 4;}
@font-face
{font-family:Calibri;
panose-1:2 15 5 2 2 2 4 3 2 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0cm;
margin-bottom:.0001pt;
font-size:11.0pt;
font-family:"Calibri","sans-serif";}
a:link, span.MsoHyperlink
{mso-style-priority:99;
color:blue;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{mso-style-priority:99;
color:purple;
text-decoration:underline;}
span.EmailStyle17
{mso-style-type:personal-compose;
font-family:"Calibri","sans-serif";
color:windowtext;}
.MsoChpDefault
{mso-style-type:export-only;}
@page Section1
{size:612.0pt 792.0pt;
margin:70.85pt 70.85pt 70.85pt 70.85pt;}
div.Section1
{page:Section1;}
-->
</style>
<!--[if gte mso 9]><xml>
<o:shapedefaults v:ext="edit" spidmax="1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext="edit">
<o:idmap v:ext="edit" data="1" />
</o:shapelayout></xml><![endif]-->
<div class="Section1">
<p class="MsoNormal">Dear all,<o:p></o:p></p>
<p class="MsoNormal"><o:p> </o:p></p>
<p class="MsoNormal"><span lang="EN-US">I want to get back the
U-value of a
building (W/m2.K), is there any way for this purpose ?<o:p></o:p></span></p>
<p class="MsoNormal"><span lang="EN-US"><o:p> </o:p></span></p>
<p class="MsoNormal"><span lang="EN-US">Best regards<o:p></o:p></span></p>
<p class="MsoNormal"><span lang="EN-US"><o:p> </o:p></span></p>
<p class="MsoNormal">Salim MOKRAOUI<o:p></o:p></p>
<p class="MsoNormal">Faculté des sciences de Nancy - LERMAB<o:p></o:p></p>
<p class="MsoNormal">BP 239<o:p></o:p></p>
<p class="MsoNormal">54506 Vandoeuvre.<o:p></o:p></p>
<p class="MsoNormal">Tél 03 83 68 48 47 - mél
<a class="moz-txt-link-abbreviated" href="mailto:salim.mokraoui@lermab.uhp-nancy.fr">salim.mokraoui@lermab.uhp-nancy.fr</a><o:p></o:p></p>
<p class="MsoNormal"><o:p> </o:p></p>
</div>
<pre wrap="">
<fieldset class="mimeAttachmentHeader"></fieldset>
_______________________________________________
TRNSYS-users mailing list
<a class="moz-txt-link-abbreviated" href="mailto:TRNSYS-users@cae.wisc.edu">TRNSYS-users@cae.wisc.edu</a>
<a class="moz-txt-link-freetext" href="https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users">https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users</a>
</pre>
</blockquote>
</body>
</html>