<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 10pt;
font-family:Verdana
}
--></style>
</head>
<body class='hmmessage'>
Hello everybody,<br>I'm passing a ventilation stream in my type 56 zone in Simulation studio (after have put temperature, flowrate and RH as inputs in TRNBuild). I am passing the flowrate in type 92 to cool it. And I would like to watch the zone temperature and control it with an PID controller type 23. <br>But the type 92 have a control function as input and not a cooling rate.<br>So, is it possible to put a maximum cooling rate in the parameter of type 92 and connect the control signal from type 23 to type 92 control function (in the type 23 parameter i have put a control signal varying between 0 and 1) to control the temperature?<br>Or is there other solution to cool the air with a PID controller?<br>Best regards<br>Guy THOMAS<br>Etudiant CNAM Paris <br> <br /><hr />Télécharger en toute sécurité sur Internet ? <a href='http://clk.atdmt.com/FRM/go/206608211/direct/01/' target='_new'>La solution avec Internet Explorer 8</a></body>
</html>