Dear Jeff, Dear all,<br><br>The simulation runs perfectly in TRNSYS with the same parameters as the initialization simulation in GenOpt, and completes in a few minutes. <br>When I choose to display the TRNSYS progress bar while running GenOpt, I can check that the TRNSYS simulation terminates. But, then, there is this very long pause, and after that the error message prompts in GenOpt window.<br>

<br>I thus suspect that the problem lies in the communication of the simulation results between TRNSYS and GenOpt.<br><br>Best regards,<br>Benoît<br><br><div class="gmail_quote">2010/3/4 Jeff Thornton <span dir="ltr"><<a href="mailto:thornton@tess-inc.com">thornton@tess-inc.com</a>></span><br>

<blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;"><div class="im"><However, when I couple TRNOpt with this simulation, GenOpt only runs the<br>


Initialization simulation, and then "waits" for about one to two hours and<br>
stops, prompting the following error message:<br>
<br>
Initialize.<br>
java.lang.OutOfMemoryError:<br>
Java heap space<br>
<br>
GenOpt terminated with error.><br>
<br>
</div>Check one thing for me.  Does the simulation run (outside of the GenOpt<br>
environment) with the same parameters that is causing the problems inside<br>
of Genopt.  What I mean is that if GenOpt is killing with a=10 and b=5 and<br>
c=6, does setting a=10, b=5 and c=6 in a regular simulation cause any<br>
problems?<br>
<br>
Let us know!<br>
<br>
Jeff<br>
<br>
<br>
Jeff Thornton<br>
President - TESS, LLC<br>
<br>
22 North Carroll Street - Suite 370<br>
Madison WI 53703 USA<br>
<br>
Phone: 608-274-2577<br>
Fax: 608-278-1475<br>
E-mail: <a href="mailto:thornton@tess-inc.com">thornton@tess-inc.com</a><br>
Web: <a href="http://www.tess-inc.com" target="_blank">www.tess-inc.com</a><br>
<br>
</blockquote></div><br>