<FONT face="Default Sans Serif,Verdana,Arial,Helvetica,sans-serif" size=2><P><FONT size=2>Hi all,</FONT><BR><BR><FONT size=2>I wish to model a greenhouse with a boundary wall towards another greenhouse, and with little or no heat loss through that wall. For this, I could have used the IDENTICAL boundary condition. However, I also wish to have a window in that wall, to capture solar radiation coming through it. This is not possible with a BOUNDARY wall. Is there any way of setting the temperature on the back side of a wall with a window?</FONT></P><P><FONT size=2>I have an idea which might work. I can define a ficticious zone on the other side of the wall, and set the temperature in this zone equal to the setpoint I have in the first zone, to minimize heat loss. Then I can define the wall as ADJACENT, and have a window in it. Is this approach OK? Should I set the convective heat transfer coefficient of the ADJACENT wall to the standard inside value of 11 on both sides? Is it OK with just one wall (the adjacent wall) in the ficticious zone?</FONT></P><P><FONT size=2>Thanks for any help,</FONT></P><P><FONT size=2>Knut Erik  </FONT></P></FONT>
<br /><br>------------------------------------------------------------------------------------------------------<br><br />Meld deg på vårt nyhetsbrev på www.niva.no<br><br />