<font face="Default Sans Serif,Verdana,Arial,Helvetica,sans-serif" size="2">TRNSYS users,<br><br>I am trying to model a crawlspace that has a dirt floor underneath a home in type 56.  I am now trying to use the Tess Ground Coupling Library type 701a to model my basement.<br><br>I have created the one wall type with layers for the four sides and defined them as BOUNDARY walls.  I have also created a wall for the floor that has one layer (sand_gravel since it was the closest thing I could find in the American library) which is .01 meters thick and also defined as a BOUNDARY.  When I try to save the .bui file in TRNBLD I get an error "error creating wall transfer function coefficients."  I need to not have this error so I can look at the .inf file to see the U values that need to be entered into the parameters for type 701.  Why am I getting this error for any wall I have defined as BOUNDARY?  I have been following the .pdf description file of type 701 but I can't figure out how to use this type.<br><br>Also, what is the different between the first U value listed in the .inf file and the second U-wert value?  I know that the units between the two U values differ, and the U-wert value is the total U value given within TRNBLD.  When I convert the U-wert value to the same units as the first U value listed, I get different values.<br><br>Thanks,<br><br>Marshall<br><div></div></font>