<html>
<head>
<style>
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 10pt;
font-family:Verdana
}
</style>
</head>
<body class='hmmessage'>
Dear Matt,<br><br>The problem ist not tracing the inputs, outputs and parameters. We have been trying to debug the component <br>and have encountered the problem explained before: <br><br>" While simulating with the type 557a (Ground Heat Exchanger (TESS)) I<br>discouverd that the heat losses of the earth control volume to the<br>sides, top and bottom (Outputs: 5,6,7) are generating a peak in a<br>constant period (roughly 27 hours) while the rest of the time these<br>outputs are zero. What I actually want is an output of the losses in<br>every timestep. Does anyone have an idea what is actually calculated by<br>these outputs? Is there an error in the code?"<br><br>The problem is that the type is quite commplicated and hence we are not able to completely understand the code!<br>But the results we get seem to be wrong if ever our interpretation of the results in the online plotter are correct! <br>The losses to all sides (top, bottom and side) are 0 for nearly all the time, only for 1 timestep (after a period off roughly 27 hours) it get a value. We have tried to understand the timestep handeling in the code, which (if we understood well!!) seems to convert the unit hours of the main soubroutine into seconds for the other soubroutines used, and we suspect that there might be a mistake somewhere in the treatment of the losses with the different time units! But as mentioned we are not sure and we are no experts either !<br>Maybe some of you colleages may have an idea, <br><br>Sorry for bothering !<br><br>Thanks <br><br>max <br><br><br><br><br><br>> Date: Wed, 15 Jul 2009 20:45:34 -0500<br>> Subject: Re: [TRNSYS-users] type 557a<br>> From: duffy@tess-inc.com<br>> To: maxwithhat@hotmail.com; trnsys-users@engr.wisc.edu<br>> <br>> Max,<br>> <br>> To watch outputs (and inputs and parameters) for a component, you can use<br>> the TRACE feature. Simply click on the component, and then click on the<br>> footprints icon on the left side of the TRNSYS Simulation Studio. Run the<br>> simulation. This will print the inputs, outputs, and parameters of that<br>> specific component to the listing file, *.lst. However, I am not too<br>> familiar with Type557<br>> <br>> Best regards,<br>> <br>> Matt Duffy<br>> <br>> <br>> <br>> ----- Original Message -----<br>> From: "Max Werlein" <maxwithhat@hotmail.com><br>> Sent: Tue, July 14, 2009 12:08<br>> Subject:[TRNSYS-users] type 557a<br>> <br>> <br>> Dear Trnsys users,<br>> <br>> <br>> <br>> While simulating with the type 557a (Ground Heat Exchanger (TESS)) I<br>> discouverd that the heat losses of the earth control volume to the<br>> sides, top and bottom (Outputs: 5,6,7) are generating a peak in a<br>> constant period (roughly 27 hours) while the rest of the time these<br>> outputs are zero. What I actually want is an output of the losses in<br>> every timestep. Does anyone have an idea what is actually calculated by<br>> these outputs? Is there an error in the code?<br>> <br>> <br>> <br>> Thanks in advance<br>> <br>> <br>> <br>> Max<br>> _________________________________________________________________<br>> Enamórate este invierno con MSN Amor y Amistad<br>> http://amor.latam.msn.com/channel/index.aspx?trackingid=202694_______________________________________________<br>> TRNSYS-users mailing list<br>> TRNSYS-users@cae.wisc.edu<br>> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users<br>> <br>> <br>> ----- End of original message -----<br>> <br><br /><hr />¿Quieres conocerte mejor? <a href='http://www.descubrewindowslive.com/' target='_new'>¡Conoce lo que Windows Live tiene especialmente para ti!</a></body>
</html>