Dear Trnsys Users,
<BR>
<BR>I have a problem about a bug for thermal bridge, I find an answer in the archives but ...:
<BR>
<BR>
<BR>Hi Nicola,
<BR>
<BR>nicola wrote:
<BR>> Dear all,
<BR>> I'm modelling a wall wit a thermal bridge effect.
<BR>> I found a bug in TRNBuilt :
<BR>> 1. If I put the value of resistence equal to xxx (hmK/kJ) in the layer 
<BR>> manager, the program create a wall with a U-value expressed in kJ/h 
<BR>> m^2K and a resistence equal to xxx in hm^2k/kJ!!!
<BR>Thanks for finding this bug. I think it is only a problem of displaying 
<BR>the units.  The resistance should be entered in h m^2K /kJ, and not h m 
<BR>K /kJ.  When you check on the 'Layer type manager', the resistance is 
<BR>shown in h m^2K /kJ.
<BR>> 2. the u-value of a wall with thermal bridge effect is lower than the 
<BR>> same wall without thermal bridge effect.
<BR>The u-value displayed in the 'Wall type manager' is calculated by adding 
<BR>two reference heat transfer coefficients to the wall (7.7 and 25 W/m^2 K).
<BR>
<BR>Best regards,
<BR>
<BR>Diego
<BR>
<BR>
<BR>... in "Walls" when I choose a coldbridge I can put the value for length in m , not a surface in m^2.
<BR>
<BR>What is the solution? 
<BR>If the solution is all in m^2, how can I change a linear thermal bridge to surface thermal bridge?
<BR>
<BR>Thanks in advance,
<BR>
<BR>Matt
<BR><BR><BR><i><a style='color:#0000FF;text-decoration:underline' target=_blank href=http://www.laposte.net>Créez votre adresse</a> électronique prenom.nom@laposte.net<BR> 1 Go d'espace de stockage, anti-spam et anti-virus intégrés.</i><BR>