<div>Hi, <br><br>I
am trying to model a multizone building that has two stories.  I am
more comfortable using a Type 56, but recently found that I can
probably do a simplified version using a Type 660.  However, I am not
sure how to model a second story accurately with either of them.  <br>
I understand that the ceiling/floor between the two stories is simply
an adjacent, horizontal wall between the two zones, but what should I
do to get heat to flow upward through the building as it would in a
normal house (upstairs hotter in summer). <br>
Also, is there a specific library material that should be used for the
boundary between the upstairs and downstairs, assuming standard
construction? <br>Finally,
if I want two zones but no dividing wall between the zones, how would I
do that.  In the wall type manager there is a layer that I can use
called SILENCE.  does that mean "nothing" or something else?  <br>
<br>Thanks,<a href="mailto:ltw110@psu.edu" target="_blank"></a><br><br>Lucas
Witmer<br><br>M.S. Candidate Energy & Mineral Engineering<br>216 Hosler
Building<br>University Park, PA
16802<br>650.796.6814<br>ltw110@psu.edu<br><br><br><br><br><br></div>