<div dir="ltr">Hi, <br><br>I am trying to model a multizone building that has two stories.  I am more comfortable using a Type 56, but recently found that I can probably do a simplified version using a Type 660.  However, I am not sure how to model a second story accurately with either of them.  <br>
I understand that the ceiling/floor between the two stories is simply an adjacent, horizontal wall between the two zones, but what should I do to get heat to flow upward through the building as it would in a normal house (upstairs hotter in summer). <br>
Also, is there a specific library material that should be used for the boundary between the upstairs and downstairs, assuming standard construction? <br>Finally, if I want two zones but no dividing wall between the zones, how would I do that.  In the wall type manager there is a layer that I can use called SILENCE.  does that mean "nothing" or something else?  <br>
<br>Thanks,<br><br>Luke Witmer<br><br>Master's Candidate Energy and Mineral Engineering<br>The Pennsylvania State University<br><a href="mailto:ltw110@psu.edu">ltw110@psu.edu</a><br></div>