I'm trying to model a PV system that is really two separate arrays intertwined. I need one array to face East, with an individual panel angle of 15 degrees and the entire array slope of 10 degrees. The second array needs to face West with the same angles. This is supposed to be somewhat like tracking on a North South axis, only with two fixed panels, one in each direction. <br>
<br>I've been attempting to do this by using Type 30a. Also, when inporting the weather data the azimuth and slope of the surfaces can be set. Does this interfere with setting the slope and azimuth set in type 30a?<br>
<br>Thank you,<br clear="all"><br>-- <br>Jeff Rayl<br>Solar Decathlon 2009 Electrical & PV PM<br>Engineers for A Sustainable World President<br>Electrical Engineering