<div>Hello.</div>
<div>I am a beginner with TRNSYS, and am doing pracrtice with the manual and my simple model. </div>
<div> </div>
<div>I followed the manual to link two components as it said "When you move the mouse over a component icon, the 8 available connection<br>points become visible. Click one one of them to select the starting point, then go to the component you want to link and select a connection point again. Click to create the link".
</div>
<div> </div>
<div>I can see the 8 available connection points after clikcing the Link icon. But, when I click one of them to select the starting point, the points are disappeared.  I think every configuration has no problem, right orders, right configuration of each component, 
etc.except this  trouble.  </div>
<div> </div>
<div>Could you give me any advice or solution about the Link trouble?</div>
<div> </div>
<div>Thank you.</div>
<div> </div>
<div>Choi</div>
<div> </div>
<div> </div>
<div> </div>
<div> </div>
<div>Components are connected using the Link tool, which is activated by pressing the link button (see<br> </div>
<div>Figure 1–24). When you move the mouse over a component icon, the 8 available connection<br>points become visible. Click one one of them to select the starting point, then go to the<br>component you want to link and select a connection point again. Click to create the link. The
<br>newly created link is empty, i.e. it does not connect any (output; input) couple yet. This is shown<br>by a different link color (blue by default, while links with connections are black).</div>