<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.6000.16441" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>Dear all,</FONT></DIV>
<DIV><FONT face=Arial size=2>I'm modelling a wall wit a thermal bridge
effect.</FONT></DIV>
<DIV><FONT face=Arial size=2>I found a bug in TRNBuilt :</FONT></DIV>
<OL>
<LI><FONT face=Arial size=2>If I put the value of resistence equal to xxx
(hmK/kJ) in the layer manager, the program create a wall with a U-value
expressed in kJ/h m^2K and a resistence equal to xxx in
hm^2k/kJ!!!</FONT></LI>
<LI><FONT face=Arial size=2>the u-value of a wall with thermal bridge effect
is lower than the same wall without thermal bridge effect.</FONT></LI></OL>
<DIV><FONT face=Arial size=2>Somebody have any ideas how correct this
bug?</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial
size=2>*********************************************<BR>Dott. Ing. Nicola
Sorbi<BR>UNIVERSITA' DEGLI STUDI DI PERUGIA<BR>Dipartimento di Ingegneria
Industriale<BR>Via G. Duranti 67 - 06125 Perugia<BR>Tel. +39 075/5853930 - Fax.
+39 075/5853736 <BR>Cell. +39 3933523487<BR>E-mail <A
href="mailto:nicola_sorbi@mach.ing.unipg.it">nicola_sorbi@mach.ing.unipg.it</A><BR>**********************************************
</FONT></DIV></BODY></HTML>