<FONT face=TimesNewRomanPSMT>  <div align=left>Dear Trnsys-users,</div>  <div align=left> </div>  <div align=left>I'm trying to modelize a multizone building cooled by an absorption chiller coupled to a solar collector, I'd like to use the energy rate control mode.</div>  <div align=left>So do I have to define a cooling type in the *.Bui file with a fixed power that will be an input to type 56 and an output of the absorption chiller (the chilled water energy)?</div>  <div align=left>Then according to the cooling demand (output of type 56) employ an auxiliary heater in order to increase the temperature of the hot water entering the absorption chiller.</div>  <div align=left>Or as explained in the documentation: "If the cooling equipment is modeled external to the TYPE 56 component, the cooling type should not be used. Instead, the VENTILATION AIRCHANGE, TEMPERATURE and HUMIDITY should be defined as INPUTS, fed by outputs from the conditioning equipment
 component(s)"?</div>  <div align=left>But the outputs of an absorption chiller just provide chilled water temperature, its energy..etc..</div>  <div align=left> </div>  <div align=left>Thank you for clarifying my doubts</div>  <div align=left>Best regards</div>  <div align=left> </div></FONT><p>
                <hr size="1"> 
Découvrez une nouvelle façon d'obtenir des réponses à toutes vos questions ! 
Profitez des connaissances, des opinions et des expériences des internautes sur <a href="http://fr.rd.yahoo.com/evt=42054/*http://fr.answers.yahoo.com">Yahoo! Questions/Réponses</a>.