<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2900.2802" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>Dear all.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I have a question about the Ratio that is the input
in the Effective Capacitance Humidity Model of Type 56. </FONT></DIV>
<DIV><FONT face=Arial size=2>In the manual I see that the Ratio need to have a
value between 1 and 10. </FONT><FONT face=Arial size=2>However, when I
calculate the </FONT></DIV>
<DIV><FONT face=Arial size=2>expected Ratio for a certain </FONT><FONT
face=Arial size=2>room, sometimes I get values bigger then 10. Trnsys does also
not give an </FONT></DIV>
<DIV><FONT face=Arial size=2>error when applying these </FONT><FONT face=Arial
size=2>greater values. So what is the meaning of this upper value? Does Trnsys
</FONT></DIV>
<DIV><FONT face=Arial size=2>calculates the buffering not correct anymore with
values > 10, in other words, can I apply bigger values ? </FONT></DIV>
<DIV><FONT face=Arial size=2>Thanks in advance for helping me out
!!</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Kind regards, </FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Marijke Steeman<BR>PhD-student <BR>Architecture and
Urban Planning<BR>Ghent University <BR>+32(0)92643752</FONT></DIV></BODY></HTML>