<html>
<body>
Hi Ling,<br>
  In addition to Diego's solution, you can also use a Fortran
compiler to modify the Type683 so that it takes the regeneration
temperature as an input and calculates the resulting process stream
outlet humidity ratio. We did so for a project recently but the client
asked that we not release the modification publicly for a year and a
half. The modification involves changing Type683's internal iterative
scheme somewhat but the algebra is not too difficult.<br>
Kind regards,<br>
  David<br><br>
<br>
At 17:02 1/24/2006, HuiLing.Tay@csiro.au wrote:<br>
<blockquote type=cite class=cite cite="">content-class:
urn:content-classes:message<br>
Content-Type: multipart/alternative;<br>
<x-tab>        </x-tab>
boundary="----_=_NextPart_001_01C6213A.442E2F8D"<br><br>
<font face="arial" size=2>Dear Trnsys Users.<br>
</font> <br>
<font face="arial" size=2>Hi! I am trying to model a rotary desiccant
wheel dehumidifier, hence Type 683 was chosen. In this model, the
required inputs are the process air and regeneration air stream mass flow
rates, the process stream inlet conditions (dry bulb temperature and
absolute humidity ratio), the desired process stream outlet humidity
ratio, and the regeneration stream inlet absolute humidity ratio. <br>
</font> <br>
<font face="arial" size=2>However, I would like to have the regeneration
stream inlet temperature to be specified by the user and the process air
outlet humidity ratio to be calculated by the model (i.e. not a set
point). This could not be done in this model. Have anyone come across
this problem before and developed a new model to suit this
requirement?<br>
</font> <br>
<font face="arial" size=2>Thank you in advance for any help.<br>
</font> <br>
 <br>
<font face="arial" size=2>Best regards,<br>
Ling<br>
</font>_______________________________________________<br>
TRNSYS-users mailing list<br>
TRNSYS-users@engr.wisc.edu<br>
<a href="https://www.cae.wisc.edu/mailman/listinfo/trnsys-users" eudora="autourl">
https://www.cae.wisc.edu/mailman/listinfo/trnsys-users</a></blockquote>
<x-sigsep><p></x-sigsep>
****************************************************************************************<br>
Thermal Energy System Specialists (TESS), LLC <br>
David
BRADLEY                          
2916 Marketplace Drive - Suite 104 <br>
Partner                                       
Madison, WI 53719 <br>
Phone: (608) 274-2577 USA <br>
Fax: (608) 278-1475 <br>
E-mail: bradley@tess-inc.com <br>
Web Pages: 
<a href="http://www.tess-inc.com/" eudora="autourl">
http://www.tess-inc.com</a>    
and     
<a href="http://www.trnsys.com/" eudora="autourl">
http://www.trnsys.com<br><br>
</a>"Providing software solutions for today's energy engineering
projects" <br>
****************************************************************************************<br>
</body>
</html>