<html>
<body>
Dear Olympia,<br>
The notices concerning Type501 are indicating that Type501 was
found in more than one of the DLL files located in the \userlib directory
and that only the first one of them was loaded. You get that notice
because the ground temperature model is included in more than one of the
TESS Libraries. <br><br>
The Range Check error is a different problem. Please make sure
that you opened your building file with TRNBuild as there are some
translation steps that must be made to the .bui by TRNBuild. If that does
not solve the problem, the next step is that in the Studio, you can go to
the control cards icon (where you set the simulation start and stop time)
and change the Debug mode from "false" to "true."
This will turn on some new debugging features in TRNSYS 16 that check
whether one of the component's outputs was overwritten by another
component or whether one of the components calculated a divide by zero.
The message will show up in the list and log files. If you still cannot
make sense of the error, then please feel free to send me your project
(*.tpf, *.bui, and external files) and I will be happy to take a look at
it for you.<br>
Cheers,<br>
David<br><br>
At 02:09 AM 1/18/2005, Olympia Zogou wrote:<br>
<blockquote type=cite class=cite cite=""><font face="arial" size=2>Dear
Trnsys users,<br>
</font> <br>
<font face="arial" size=2>I have some problems to "run
simulation" in project made by TRNSYS 15, with TRNSYS 16. It is a
building simulation project with type 56.<br>
I have translate the old project from TRNSYS 15 to TRNSYS 16 without
loosing the old conections. <br>
The project runs very well in TRNSYS 15,<br>
but when I try to run it, in Trnsys Simulation Studio (TRNSYS 16) I
get the next messages<br>
" Range check error "<br>
</font> <br>
<font face="arial" size=2>After clicking the OK BUTTON, I get <br>
</font> <br>
<font face="arial" size=2>An unexepected error was encountered and TRNSYS
will abort.<br>
</font> <br>
<font face="arial" size=2>Open the list file I see warnigs and notices.
The most of the notices<br>
are related with TYPE 501(Ground Temperature Model - Utility Library
TESS).<br>
Is the only model I use from TESS library (see attached file
building.lst)<br>
Any hints would be welcome.<br>
<br><br>
</font><font face="Times New Roman, Times">best regards
<?xml:namespace prefix = o ns =
"urn:schemas-microsoft-com:office:office" /><br>
</font><font face="arial" size=2><br>
</font><font face="Times New Roman, Times"> <br>
</font><font face="arial" size=2><br>
</font><font face="Times New Roman, Times">Olympia<br>
</font><font face="arial" size=2><br>
<br>
</font><font face="Times New Roman, Times"><br>
Dipl.-Ing. Olympia Zogou<br><br>
Laboratory of Thermodynamics & Thermal Engines<br><br>
Department of Mechanical & Industrial Engineering<br><br>
University of Thessaly<br><br>
Pedion Areos, 383 34 Volos, Greece<br><br>
Tel. (+3024210) 74013, Fax (+3024210) 74096, <br><br>
E-mail: olyz@uth.gr<br><br>
<a href="http://www.mie.uth.gr/labs/ltte/info/info.htm" eudora="autourl">http://www.mie.uth.gr/labs/ltte/info/info.htm</a><br>
</font><br>
_______________________________________________<br>
TRNSYS-users mailing list<br>
TRNSYS-users@engr.wisc.edu<br>
<a href="https://www.cae.wisc.edu/mailman/listinfo/trnsys-users" eudora="autourl">https://www.cae.wisc.edu/mailman/listinfo/trnsys-users</a></blockquote>
<x-sigsep><p></x-sigsep>
****************************************************************************************<br>
Thermal Energy System Specialists (TESS), LLC <br>
David
BRADLEY
2916 Marketplace Drive - Suite 104 <br>
Partner
Madison, WI 53719 <br>
Phone: (608) 274-2577 USA <br>
Fax: (608) 278-1475 <br>
E-mail: bradley@tess-inc.com <br>
Web Pages:
<a href="http://www.tess-inc.com/" eudora="autourl">http://www.tess-inc.com</a>
and
<a href="http://www.trnsys.com/" eudora="autourl">http://www.trnsys.com<br><br>
</a>"Providing software solutions for today's energy engineering
projects" <br>
****************************************************************************************<br>
</body>
</html>