[TRNSYS-users] Linkage of soil properties with the Buried heat exchanger

[Soheil Roumi]

*Hello all,*

I designed the attached .idf file with sketchup 2019 and TRNSYS3D (it is
just 1 zone). While I try to define a multizone project in TRNSYS, it keeps
saying "At least 2 surfaces are required per zone.". I only have 1 zone and
As you can see there are many surfaces in it.
Could you please help me with understanding what the problem is?
Thanks in advance.
PS. I just found this solution for a similar problem but it did not help.
http://onebuilding.org/archive/trnsys-users-onebuilding.org/2013-March/024852.html


*Kind regards, *

Soheil


[image: image.png]




On Mon, Jun 14, 2021 at 10:28 AM Mohaned Hossam via TRNSYS-users <
trnsys-users at lists.onebuilding.org> wrote:

> Hello TRNSYS Users,
> Kindly i would like to know how  to link the soil properties with the
> buried heat exchanger, and if there is a ready model for this tsask
>
> --
> Yours Sincerely,
> Mohaned Hossam Aly
> *Mohaned Hossam*
> Mechanical Engineer
> (+202)01006715780
> Mohanedhossam11 at gmail.com
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20210614/3ead8e36/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 241108 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20210614/3ead8e36/attachment-0001.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 14.06.2021-ChildrensCentre.idf
Type: application/octet-stream
Size: 68402 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20210614/3ead8e36/attachment-0001.obj>