[TRNSYS-users] Type 539 and 538

thornton at tess-inc.com thornton at tess-inc.com
Wed Aug 25 10:19:32 PDT 2021


On 2021-08-24 22:13, Ali Shahrouzian via TRNSYS-users wrote:
> However, when I directly connect the heat exchanger outlet to the
> collector inlet, the mass flow rate of the solar loop increases
> rapidly and reaches its maximum value.

Ali,

I just did exactly as you described and it worked just fine here.  See 
attached image.  Please check your parameters and inputs carefully.  
Make sure you have a small timestep, and also consider adding pipes and 
the pump.  Make sure you have enough flow on the other side of the heat 
exchanger to remove the heat from the collector.  If you still cannot 
discover why it isn't working then I suggest you send your project to 
your distributor to see what they can find.

Jeff
-- 
Jeff W. Thornton
President
Thermal Energy System Specialists LLC
3 N. Pinckney Street, Suite 202
Madison WI 53703 USA
(608) 274-2577
www.tess-inc.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Collector.png
Type: image/png
Size: 79421 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20210825/b3334675/attachment-0001.png>


More information about the TRNSYS-users mailing list