[TRNSYS-users] UNITS IN PUMP TYPES

David BRADLEY d.bradley at tess-inc.com
Wed Sep 30 07:09:19 PDT 2020


Ricardo,

   If the conversion factor is incorrect between hp and kJ/h then it 
would be the case for all proformas. I would recommend checking a few 
other components to see whether the problem is consistent across all 
components (as opposed to just for the pumps). If it is a consistent 
error then you'll need to check your unit dictionary as it sounds as 
though it has gotten modified. You can access the unit dictionary by 
selecting it from the "tools" menu in the Simulation Studio. You could 
also simply replace the file .\Trnsys17\Studio\Exe\dictionary.dic with a 
copy from your original installation.

kind regards,

  David


On 09/29/2020 18:18, Ricardo Gallegos via TRNSYS-users wrote:
> Hi All.
> In TYPES 3b, 3d, 110 and 114  (TRNSYS 17) in the proforma, in the 
> PARAMETERS tab, one sepecifies the power of the pump. It happens that 
> when I specify 1 hp, and revert the units to kJ/h, the value shown is 
> in J/h , not kJ.THe output is also in J/h, not kJ as the labels in the 
> units column show.
> Is this only a mistake in the label?
> Regards. Ticardo
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20200930/bf55f0ef/attachment.html>


More information about the TRNSYS-users mailing list