[TRNSYS-users] value of times steps

[David BRADLEY]

Prof Bina,

   Values of outputs at previous time steps can be obtained from Type150 
in the standard library or from Type661 in the TESS Controllers library. 
I am not aware of any components that read ahead in the weather data so 
obtaining Tsky (or anything else) at time t+1 would require writing a 
new component.

kind regards,

  David


On 10/26/2020 06:31, saeid mohammadzadeh via TRNSYS-users wrote:
> Hello everyone,
> I hope you are doing well and safe from Covid-19.
> I am seeking a way to call a parameter's value at the desire time step 
> of running. For example, I wanna connect weather to an equation 
> component and write an if statement something like this:
> if T_sky(t-1), which shows the temperature of the sky at the previous 
> hour (based on run time step). Or even t+1 for the next time step.
>
> //Best Regards//
> /Saeid Mohammadzadeh Bina, Dr. (Eng.)/
> //-------------------------------------------------//
> /Akita University/
> /Graduate school of International Resource Sciences//.
> 1-1 Tegata gakuen-machi, Akita 010-8502, Japan/
> /Tel: //+815068665026 (Japan)/
> / +989141011757 (Iran)///
> /E-mail: //d9515254 at s.akita-u.ac.jp/ 
> <mailto:s.mohammadzadeh66 at gmail.com>//
> /mohammadzadehsaeid at yahoo.com <mailto:mohammadzadehsaeid at yahoo.com>/
> //-------------------------------------------------
>
> //
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20201026/e6215987/attachment.html>