[TRNSYS-users] Generating Shading/Insolation matrix

[David BRADLEY]

Meghana,

  This sounds like a specific enough problem with your project that you 
should probably send it to your distributor for assistance.

kind regards,

  David


On 10/22/2020 08:25, Kulhalli, M.S. via TRNSYS-users wrote:
>
> Hi Users,
>
> I’m currently using TRNSYS coupled with CONTAM through Type98. I have 
> one zone with 3 airnodes, for which the detailed radiation models are 
> active. The *.ism file for this zone is not being created, though that 
> was the case in earlier simulations. Despite of using the function to 
> ‘Generate Shading/insolation Matrix’ files, there is no file created, 
> though there are also no errors or warnings reported. What could be 
> the reason for this?
>
> Best regards,
>
> Meghana
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20201022/3ddfdd53/attachment.html>