[TRNSYS-users] Not able to put custom input in Type 56 (Multi zone Building)

[David BRADLEY]

Assile,

   You cannot do it directly by passing a value to Type56. The method I 
explained is a bit clumsy but it accomplishes the same thing.

kind regards,

  David


On 10/08/2020 10:19, Assile Al-Jardali wrote:
>
> Does this mean I can’t make U-value and insulation thickness 
> variables? And change it during simulation?
>
> Is it possible to do this with other software? Other than TRNEdit?
>
> Thank you for your cooperation,
>
> ------------------------------------------
>
> Assile Al Jardali, MEng
>
> Mechanical Engineer
>
> Mobile:+961 70 860339
>
> E-mail: assile.aljardali at live.com
>
> *From: *David BRADLEY <mailto:d.bradley at tess-inc.com>
> *Sent: *Thursday, October 8, 2020 4:50 PM
> *To: *TRNSYS users mailing list at OneBuilding.org 
> <mailto:trnsys-users at lists.onebuilding.org>
> *Cc: *Assile Al-Jardali <mailto:assile.aljardali at live.com>
> *Subject: *Re: [TRNSYS-users] Not able to put custom input in Type 56 
> (Multi zone Building)
>
> The way to do this is to make a different *.bui file for each 
> iteration of the parametric table then add a series of ASSIGN 
> statements in your *.dck so that each of the *.bui files is assigned a 
> unique logical unit number. You then create an equation that sets the 
> value of the logical unit number that Type56 will use and you replace 
> Type56's logical unit parameter with the name of the defined variable. 
> When you create the parametric table in TRNEdit, you'll select that 
> same variable name and assign one table run to each of the logical 
> unit values.
>
> kind regards,
>
>  David
>
> On 10/08/2020 07:46, Assile Al-Jardali via TRNSYS-users wrote:
>
>     Dear All;
>
>     As I am conducting a parametric study for glass U-value and
>     insulation thickness, please I need to know how can I make these 2
>     parameters and Input values or constants so I can use them later
>     on in the study on TrnEdit.
>
>     Thank you,
>
>     ------------------------------------------
>
>     Assile Al Jardali, MEng
>
>     Mechanical Engineer
>
>     Mobile:+961 70 860339
>
>     E-mail: assile.aljardali at live.com <mailto:assile.aljardali at live.com>
>
>
>
>     _______________________________________________
>
>     TRNSYS-users mailing list
>
>     TRNSYS-users at lists.onebuilding.org  <mailto:TRNSYS-users at lists.onebuilding.org>
>
>     http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org  <http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org>
>
> -- 
> ***************************
> David BRADLEY
> Principal
> Thermal Energy Systems Specialists, LLC
> 3 North Pinckney Street - suite 202
> Madison, WI  53703 USA
> P:+1.608.274.2577
> F:+1.608.278.1475
> d.bradley at tess-inc.com  <mailto:d.bradley at tess-inc.com>
> http://www.tess-inc.com  <http://www.tess-inc.com>
> http://www.trnsys.com  <http://www.trnsys.com>
>
> -->
>
-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20201008/11a0b43e/attachment-0001.html>