[TRNSYS-users] Type 90 data file error

David BRADLEY d.bradley at tess-inc.com
Mon Nov 9 08:32:12 PST 2020


Ming,

   There were a lot of quote marks (") in the file that you sent. Once I 
deleted them, the simulation ran fine. I don't know if perhaps those 
marks are getting added by a Chinese version of Windows or whether you 
added them. I hope it is something that you added so that they are not 
difficult to remove.

kind regards,

  David


On 11/09/2020 09:03, LI, LIMING [Student] wrote:
>
> Hi David,
>
> Attached are the TPF file and the external data file after my 
> modification.
>
> I am using TRNSYS 18.
>
> Thank you.
>
> Best regards,
>
> Ming
>
> *From:*David BRADLEY <d.bradley at tess-inc.com>
> *Sent:* Monday, November 9, 2020 10:37 PM
> *To:* TRNSYS users mailing list at OneBuilding.org 
> <trnsys-users at lists.onebuilding.org>
> *Cc:* LI, LIMING [Student] <liming.li at connect.polyu.hk>
> *Subject:* Re: [TRNSYS-users] Type 90 data file error
>
> Ming,
>
>   Could you please send me the data file and your project? It would 
> also be helpful to know what version of Trnsys you are using.
>
> kind regards,
>
>  David
>
> On 11/09/2020 05:34, LI, LIMING [Student] via TRNSYS-users wrote:
>
>     Dear Sir/Madam,
>
>     I am using type 90 to simulate a wind turbine.
>
>     The simulation runs without error using the default external data
>     file. However, after I change some of the parameters, it appears
>     “unable to read from WECS data file”. Are there some points I
>     should notice?
>
>     Thank you.
>
>     Best regards,
>
>     Ming
>
>
>     /Disclaimer:/
>
>     /This message (including any attachments) contains confidential
>     information intended for a specific individual and purpose. If you
>     are not the intended recipient, you should delete this message and
>     notify the sender and The Hong Kong Polytechnic University (the
>     University) immediately. Any disclosure, copying, or distribution
>     of this message, or the taking of any action based on it, is
>     strictly prohibited and may be unlawful./
>
>     /The University specifically denies any responsibility for the
>     accuracy or quality of information obtained through University
>     E-mail Facilities. Any views and opinions expressed are only those
>     of the author(s) and do not necessarily represent those of the
>     University and the University accepts no liability whatsoever for
>     any losses or damages incurred or caused to any party as a result
>     of the use of such information./
>
>     _______________________________________________
>
>     TRNSYS-users mailing list
>
>     TRNSYS-users at lists.onebuilding.org
>     <mailto:TRNSYS-users at lists.onebuilding.org>
>
>     http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>     <http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org>
>
> -- 
> ***************************
> David BRADLEY
> Principal
> Thermal Energy Systems Specialists, LLC
> 3 North Pinckney Street - suite 202
> Madison, WI  53703 USA
> P:+1.608.274.2577
> F:+1.608.278.1475
> d.bradley at tess-inc.com <mailto:d.bradley at tess-inc.com>
> http://www.tess-inc.com <http://www.tess-inc.com>
> http://www.trnsys.com <http://www.trnsys.com>
>
> -->
>
>
> /Disclaimer:/
>
> /This message (including any attachments) contains confidential 
> information intended for a specific individual and purpose. If you are 
> not the intended recipient, you should delete this message and notify 
> the sender and The Hong Kong Polytechnic University (the University) 
> immediately. Any disclosure, copying, or distribution of this message, 
> or the taking of any action based on it, is strictly prohibited and 
> may be unlawful./
>
> /The University specifically denies any responsibility for the 
> accuracy or quality of information obtained through University E-mail 
> Facilities. Any views and opinions expressed are only those of the 
> author(s) and do not necessarily represent those of the University and 
> the University accepts no liability whatsoever for any losses or 
> damages incurred or caused to any party as a result of the use of such 
> information./
>
-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20201109/a1f1aa8b/attachment.html>


More information about the TRNSYS-users mailing list