[TRNSYS-users] TRNSYS time equation

[Marion Hiller]

Hello Adnan,

I recommend to use Type 14 instead of an equation .

Marion

Marion Hiller
hiller at transsolar.com

Transsolar SoftwareEngineering
Stuttgart | Munich | Paris | New York

Transsolar Energietechnik GmbH | Curiestrasse 2 | 70563 Stuttgart | Germany
CEO: Matthias Schuler, Thomas Auer, Stefan Holst, Dieter Schnelle
Registered at Amtsgericht Stuttgart HRB 23347 | USt-IdNr.: DE 152272639

Von: TRNSYS-users <trnsys-users-bounces at lists.onebuilding.org> Im Auftrag von adnan rasheed via TRNSYS-users
Gesendet: Donnerstag, 26. März 2020 08:26
An: TRNSYS users mailing list at OneBuilding.org <trnsys-users at lists.onebuilding.org>
Cc: adnan rasheed <adnan.upm.spain at gmail.com>
Betreff: [TRNSYS-users] TRNSYS time equation


Hello everyone,

i want to use an equation for two control parameters time and temperature . like my control is

00 to 5h.... temp set point 18 C
5-10h....  temperature set point 22  C
10-18h....23  C
18 -24h...24  C
 i need to get output as 0 or 1,  i am already using the following equation which is only allowing me to set one temperature set point, i need to set different temperature set points during complete one day.

GT(Temp,20)

how i can add time function with this equation

Thanks

--
Adnan Rasheed
Post-doc Research Fellow
Kyungpook National University
Daegu, South Korea.
+82-102762-0105
adnan.upm.spain at gmail.com<mailto:adnan.upm.spain at gmail.com>, adnanrasheed at knu.ac.kr<mailto:adnanrasheed at knu.ac.kr>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20200326/7ab1391f/attachment.html>