[TRNSYS-users] getting temperature values to notepad

[Emre Arpaci]

Thanks Mr.Jeff
 I finally did it. You are perfect  as usual.

Regards
Emre

Jeff Thornton via TRNSYS-users <trnsys-users at lists.onebuilding.org>, 5 Mar
2020 Per, 01:40 tarihinde şunu yazdı:

> <Shortly my question is that how can i get the ambient temperatures of
> the type15  in  notepad? My simulation timestep is five minutes>
>
> The Type 25 printer will work well for your needs.  If you give the file a
> .xls extension it'll open beautifully into Excel.
>
>
>
> Jeff
>
>
>
> ---
> Jeff Thornton
> President - TESS LLC
> 3 N. Pinckney Street, Suite 202, Madison WI USA 53703
> Office: (608) 274-2577  Fax: (608) 278-1475www.tess-inc.com
> E-Mail: thornton at tess-inc.com
>
> On 03/04/2020 2:00 pm, Emre Arpaci via TRNSYS-users wrote:
>
> Hi trnsys user
> I m simulating my system in 5 minute timestep. I want to get the ambient
> temperature from the type 15.  I dont want to show it trnsys plotter.  I
> will show ambient temperature in excel. Anyway, I connected dry bulb
> temperature  of Type 15 to  type 46.  But the values are weird.
> Shortly my question is that how can i get the ambient temperatures of the
> type15  in  notepad? My simulation timestep is five minutes
>
> Thanks
> Regards
> Emre
>
> _______________________________________________
> TRNSYS-users mailing listTRNSYS-users at lists.onebuilding.orghttp://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20200305/44115222/attachment.html>