[TRNSYS-users] TRNSYS 18: Type 56

David BRADLEY d.bradley at tess-inc.com
Tue Jun 30 12:15:27 PDT 2020


I would recommend that you get in touch with your TRNSYS distributor. 
You'll need to send them the project and all the files needed in order 
to run the simulation.

kind regards,

  David


On 06/30/2020 07:42, Hassan MAHACH via TRNSYS-users wrote:
> Hello everyone,
> I'm simulating a building using Type 56 of TRNSYS 18, when I plotted 
> the interior relative humidity of a zone, I found  illogical values, 
> the humidity is above 100%. However, using the sameTPF in TRNSYS 17, 
> the humidity values are good!
>
> There any problems in TRNSYS 18 about interior humidity?
> Thank you for your help
> Best,
> Hassan
> /------------------------/
> *Hassan MAHACH, *PhD student
> Energy Processes Research Group, LMFE, Faculty of Sciences Semlalia.
> EnR2E Laboratory, National Center for Studies and Research on Water 
> and Energy (CNEREE)
> Cadi Ayyad University Marrakech, Morocco
> Tel: +212 618 20 37 74
> Email: hassanmahach at gmail.com <mailto:hassanmahach at gmail.com> & 
> hassan.mahach at ced.uca.ma <mailto:hassan.mahach at ced.uca.ma>
>
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20200630/fb8e65d2/attachment.html>


More information about the TRNSYS-users mailing list