[TRNSYS-users] using matlab to build new component

[David BRADLEY]

QU,

  Yes, you can. I would definitely recommend that you make sure that you 
make sure that the Matlab examples work first so that you can be certain 
that the communication between your version of Trnsys and your version 
of Matlab functions properly.

kind regards,

  David


On 06/15/2020 05:21, 德堡 via TRNSYS-users wrote:
> Dear David I am using trnsys to simulate solar drying system. There is 
> no dryer component in the libiary, so I need to build it. Can I use 
> Matlab instead of fotran language to build the new component, then use 
> type 155 to call it? Thanks a lot. Regards Hang Qu Science and 
> Engineering Faculty Queensland University of Technology QLD 4000, 
> Australia
> ------------------ 原始邮件 ------------------
> *发件人:* "Arian Bahrami via TRNSYS-users"<trnsys-users at lists.onebuilding.org>
> *发送时间:* 2020年6月7日(星期天) 凌晨4:05
> *收件人:* "TRNSYS users mailing list at 
> OneBuilding.org"<trnsys-users at lists.onebuilding.org>;
> *抄送:* "Arian Bahrami"<arianbhm at yahoo.com>;
> *主题:* Re: [TRNSYS-users] Why type11d changes the outlet temperature?
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20200615/47ecaef6/attachment.html>