[TRNSYS-users] Concentrating PV-Thermal type 50

[David BRADLEY]

Janeet,

  Your first two questions are things that have been fixed in the most 
recent version of TRNSYS. I am not sure when they were fixed but I think 
they have been fixed for awhile. Which version of Trnsys are you using? 
If it is an older version, you can fix them by modifying the proformas 
yourself. The errors are in the proformas and not in the code.

  As for your third question, you'll need to send that to your 
distributor. If you aren't sure who to contact, send me a direct email 
and I will point you in the correct direction.

kind regards,

  David


On 07/27/2020 06:58, janeet anand via TRNSYS-users wrote:
> Dear experts,
>
> I am trying to simulate a parabolic trough concentrating collector 
> using the type 50e-mode 8. Have included the defualt SOLCEL data file.
>
> Had a few queries:
> 1. Parameter 3 - ratio of aperture to absorber area - max allowable 
> value is 1 whereas the concentration ratio of 55 is to be simulated. 
> Please can you advise a solution to this.
> 2. Input 4 - Incident radiation is required in KJ/hr or KJ/hr/m2?
> 3. Input 7 - Voltage applied to array - anything above 2V gives 
> unrealistic output.
>
> Thank you for your time.
>
> Regards,
> Janeet
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20200727/9e27f4cc/attachment.html>